yacht restoration youtube

• Practical Boat Owner
• Digital edition

Wooden boat restoration: the Youtube channel following four years in a boatyard

• June 4, 2021

Clive Robertson swaps a London media career for four years in a boatyard working on his wooden boat restoration project and recording it all expertly on Youtube.

It was October 2015, I was 30 years old, and dreaming of sailing the world some day, perhaps even owning a gaffer of my own.

By weekday, I was a media producer, by weekend, a sailor. For years I balanced this compromise, the prospect of ‘climbing the ladder’ versus being on the river in East Anglia, something I wasn’t willing to let go of.

At the time, I owned a 22ft fin keel cabin cruiser, kept in Holbrook Creek on the River Stour but with very little funds available after the £750 monthly commute and no maintenance facilities in Holbrook Creek, Spindrift was getting worse for wear.

I realised that although I absolutely loved what I did for a job, this had to be time for a change. The 2-hour daily commute by car, bike and train was not sustainable and, 10 years into working life, I was making no progress towards a buying a gaffer of my own.

Which career is best for owning a boat?

While I weighed up the limited options available, it occurred to me that schools have the whole summer off to go sailing as well as a laying-up holiday in October, maintenance holidays in December and February and a fitting out holiday in Easter before the shakedown cruise holiday in May.

Having graduated with my MBA a week earlier following evening classes two days a week for three years, I searched for teaching vacancies. The first result on Google was for a full time business teacher at a local college, with training provided. I filled in some forms and clicked apply, not thinking much of it. Two weeks later I had attended an interview, taught a small group for 20 minutes and been offered the job. As it happened, I was the only applicant.

There I was, about to give up everything I knew and all the years of progression that had led to a well respected job in the radio industry, because I wanted to save for a gaff-rigged boat and find some time to use it.

I knew nothing about teaching.

I said yes and began my three-month notice period. I had three months to learn quickly how to teach 16-19 year olds in a college that “requires improvement”. Talk about a baptism of fire.

Going back to school

On initial inspection, Andromeda looks to be in good condition – All photos Clive Robertson

On 4 January 2016 I walked out of the office in Leicester Square for the last time. At the end of January I would receive my London wage for the last time but without having to pay for my commute! I thought this could be the start of the gaffer fund but, as it later turned out, this WAS the gaffer fund.

Two weeks into my new job, I had reservations about my decision and realised I’d massively underestimated the role.

This coincided with a sailing friend getting in touch to say there was a clinker boat in an Essex yard that hadn’t moved for a few years. Apparently this boat wasn’t for sale but there was a chance the owner might be open to a conversation about it.

I looked up some photos of the boat and it looked perfect.

I contacted the owner. We agreed on a figure that I knew I didn’t have and we agreed I could pay some now and some in a year’s time.

I handed over £1,000 and was now the owner of a 27ft, 5.5 ton gaff rigged cruiser… and so in the space of four months everything had changed. The project of restoring Andromeda began.

Learning the tools of the trade

I’d spent a lot of time in my childhood sailing wooden boats with my parents and family friends and had spent my time on the train reading about boatbuilding or writing a blog about my sailing trips.

Never, though, had I picked up some woodwork tools and taken them to a hull. I had to learn very quickly.

Andromeda was in remarkably good condition at first sight. However, her entire hull of a few thousand copper nails would need re-fastening. While this isn’t a complicated job in itself, accessing the copper fastenings in many places certainly is.

To give you a sense of the problem, I put a hose in Andromeda ’s bilge and scattered some salt around.

On full mains pressure the hull would hold around an inch of water in the bilge. It became apparent I had bought a mahogany colander, of the biggest sort.

At this stage I took advice from all directions and this was often conflicting but I pushed on and spent January to April fitting out Andromeda and carrying out repairs here and there to get her afloat. But I didn’t touch any of the fastenings.

The hour drive every evening after work and every weekend to work on Andromeda was becoming costly and a bit monotonous at times. Most days I would work on her until 10pm before heading home with my well trained London commuter adrenaline keeping me going.

I really had to get Andromeda afloat just to try and get her closer to home!

The day the yard put her afloat before I’d had a chance to antifoul.

I mentioned to the yard that I was interested in seeing if Andromeda could take up and allow her planks to swell up a bit . The Wednesday before the Easter Bank Holiday weekend, I arrived at the yard to find Andromeda gone. Shocked and confused I jogged towards to the steep slipway to find her in a trailer with the tide coming in.

The yard workers had translated this into, ‘can you put her afloat please’.

I spent that evening antifouling the boat and then next day the yard put her in the water. Water poured in everywhere and I remember feeling uneasy while telling myself, she’s taking up, isn’t this the whole idea?

What is Taking Up? When a wooden boat has been out of the water for a long time, the wood dries and moisture lost from within the cells of the wood causes shrinkage. This water loss and shrinkage will continue until the moisture content of the wood is in balance with the humidity of the environment. When put back in the water, a boat that’s been dry for a long time will leak. ‘Taking up’ is the process of getting the hull wet to allow moisture back into the wood to stop these leaks. If the boat’s on a trailer you could chuck some salt in the bilge and just give her a hose down (though be careful not to add too much weight and overload the trailer or the boat). Another option is to sink the boat for a while or just launch her and stand by with a pump. You might also decide to pack any gaps in the hull with tallow or ask your boat yard to allow her to remain in slings for a while on launch day. Softwood planking will take up faster, whereas hardwood planking will take longer due to the nature of the wood.

My brother arrived with a big petrol powered pump that can move 20 litres of water per second on full throttle and we tied this down in the cockpit as the tide rose.

Afloat, Andromeda was projecting a 2in diameter column of water 20ft out of her starboard side. The pump was on full throttle and just about keeping up.

The yard moved her to a quayside to free up their slipway and then went on leave for the bank holiday weekend.

So there I sat with my dad for four days straight, on top of every tide, morning and night.

The pump got low on fuel, we raced to a petrol station; the exhaust fell off it, we fixed it while it was running; the pull-cord snapped, we took the whole assembly off and wrapped a sail tie around the flywheel to start it. If any of these ideas had failed, Andromeda would have sunk up to her cross trees!

This was a very stressful weekend and the workday was looming so I sadly had to ask the yard to lay her up once more.

Downbeat, high and dry, this felt like a huge setback.

Restoring a boat? Beat the restoration blues and get back to work today

Procrastination is the art of busily doing nothing while another part of you gets really disappointed about it. I’m a…

How to buy an old boat as a project – DIY yacht restoration advice

Growing up sailing on the East Coast it’s fair to say that I caught the bug pretty early on. Family…

Does tallow stop wooden boats leaking?

How could we get her to float without dismantling the entire boat? A friend suggested tallow and at that point any suggestion was an option, so I went to my nearest chandlery and cleared out their stock of tallow.

Together with my mum and dad, I pulled lumps of tallow off blocks and shoved it in the lands on Andromeda , all the way along the seams, down the sternpost, down the stem and along the keel.

By this point in the year the sun was warming up and threatening to melt my tallow caulking. What a balancing act this all appeared to be!

The yard, for a second time, put Andromeda in the water and with the petrol pump primed and now labelled ‘ Andromeda ’s Bilge Pump’ not a single drop of water crept into her cabin. I was astounded. Here I found myself standing in my own gaffer, feeling her afloat and hearing water lapping at her planks. We manoeuvred her to the town quayside in Walton on the Naze, 100ft away and I actually steered her through the water with a tiller, it felt amazing.

Over the next week I painted the coachroof, varnished the woodwork and chased up the yard yet again, to get her mast out of their shed which I hadn’t even seen at this point.

Eventually it appeared in the yard and I did some pretty serious maintenance on the rigging and crosstrees before asking for it to be stepped.

I turned up one weekend seeing Andromeda ’s white masthead poking up over a shed, excited that I now had something resembling a sailing boat, and trotted around the corner to start playing with ropes.

As I jumped on board, I slid back the main hatch and saw the cabin sole planks awash with 6in of water. I looked further aft to see the engine sitting in this deep bilge water with the starter motor millimetres above it.

My heart sank. What had gone wrong?

I looked to the switch panel to see the bilge pump was turned off and as I flicked it on, it hummed into life and started pumping this volume of water overboard. A closer look at the rigging revealed the yard had stepped the mast, screwed up the standing rigging very tight and seemingly turned off the bilge pump, intentionally or not! The chainplates, having pulled the planks, had let the water in before she had taken up at all.

This idea of owning a boat was certainly demonstrating some highs and lows but I still felt, on aggregate, that life was better than the previous year.

Handling like a dream

My first night on board in the Walton Channel, dinner for one.

I eased off the rigging screws, sponged out the last of the bilge water, rigged up her bowsprit and some halyards and decided it was time to set sail. I picked a weekend with a decent evening tide and motored out of this creek into the Walton Channel in the Walton Backwaters to pick up a mooring for the night.

By this time Andromeda had a working cooker, some nice comfy bunks, a working heads and a decent engine. That evening I dined in relative luxury for a gaffer and it was so nice to spend the night on board.

In the morning I woke to the sound of birdsong all around. As I lay in my bunk with the hatches wide open, the morning sunlight poured into the cabin and wavelets lapped at Andromeda’s planking, increasing in volume as the tide turned to wind over tide.

On the mooring I set a mainsail, then a topsail – which very usefully travels up a jackstay to the masthead on piston hanks, the easiest topsail I’ve ever set! I cast us adrift and with a light rattle, the Wykeham Martin furler with a long line from the cockpit launched the jib into action. With the river to myself at this early hour I walked up to the mast to set the staysail and sailed her out of the Walton Backwaters and home to Pin Mill on the River Orwell in a light breeze from the South.

Having arranged to borrow a mooring from a gaffer friend, as I approached Pin Mill I spotted the buoy and hove to. Andromeda drifted up the river sideways on the tide as I canned the topsail and staysail and fetched a warp and a boathook. The mooring buoy was approaching closer and I decided to bear away into the shallows before rounding up, furling the jib and carrying momentum towards the buoy. I had plenty of sea room, so I cracked off the mainsail sheet and hurried forwards to grab the buoy. Andromeda handled like a dream.

Four years of restoration

Playing around with Andromeda’s rigging options.

That summer I sailed Andromeda gingerly up and down the rivers, usually singlehanded, and spent a few nights on board. However, a close eye on her bilge pump activity revealed she was leaking, and this was increasing. She was pumping for 30 seconds every hour by November and so I decided to lift her out at Pin Mill for a closer look.

That closer look turned into four years of restoration…

During this time I moved from teaching Business to Media, became a qualified teacher, met my girlfriend Hannah and revived my ability as a producer by creating a website, blog, podcast and YouTube channel to track the progress that I made with Andromeda .

I’ve taken Andromeda’s engine out, serviced and painted it, dismantled her interior to access every single plank fastening, replaced floor timbers and learnt how to laminate frames along the way. I’ve recently made a brand new rudder from scratch by laminating and through-bolting iroko hardwood planks and re-caulked her garboard seams.

In 2020 I flicked the switch on my ratchet from “undo” to “do up” and that for me signifies passing the halfway point.

I feel like I’ve just tacked around the windward mark after a long beat to weather, we’re now flirting with the prospect of a jibe but heading to the finish line flat out. Instead of taking Andromeda apart, I’m now putting her back together. In this time Andromeda has dried out but all of her fastenings have been tightened or replaced and I hope that she takes up tight to be a solid strong boat.

I’ve achieved these steps by understanding that while I don’t know how to do something today, if I look in the right places, I could learn how to do it by tomorrow. YouTube has been a huge pool of knowledge with channels such as Sampson Boat Co and Tips from a Shipwright giving me the confidence to face challenges such as making new frames.

On top of this, Gus Curtis at Harry Kings boatyard in Suffolk has been the most valuable sounding board and advised me every step of the way.

Will Andromeda float when she goes back in the water? I’m not really sure. Will she run into any more problems? I suspect she probably will. If I maintain this idea that I can break down every obstacle though, deal with it one step at a time and find myself more knowledgeable by the end of it, then every obstacle is actually something positive.

In October 2015 the idea of owning a seaworthy decent sized gaffer seemed impossible, a pipe dream, yet here I am making progress towards my goal.

My advice, if you’re dreaming about owning a boat, is to wander down to your local boatyard, find a project and make it happen. If you’re not investing large amounts of money, what’s the worst that can happen?

Though if she’s planked over frames, I would certainly stock up on tallow first…

About the author

Clive Robertson

Clive Robertson grew up sailing gaff rigged boats on the East Coast from a very young age and is determined to prove that boat ownership can be an affordable hobby for any family. Clive and Hannah document their adventures with Andromeda on YouTube .

Experience being on the deck of a winning yacht or step inside a sail loft. Stories on yacht design, books, racing and marine art – all on the pages below.

Boat building videos

Videos of craftsmen, their tools and techniques. Browse through the yards – peak through the heavy doors of many workshops where traditional boat building skills are being kept alive. 

Racing videos

Windward marks, hoists of spinnakers and protests galore make this selection of films on racing classic yachts a must watch.

Cruising on a classic boat provides a kind of medicine for the soul when all the elements are in favour. These films explore secret shores, good food on board, stories about unforgettable passages.

From modern-day pirates who collect extraordinary maritime artefacts off the sea bed to a boat builder who remembers the Champagne cracking "first time!" at the launch of beautiful cutter in 1937. 

Marine artists at work, sea-shore foraging techniques and cookery afloat are just some of the stories we release here. Characters, their houses and personal objects offer inspiration to the individual who's soul is closely bound to the sea.

BOAT BUILDING

Explore the world of boat building through videos on craftsmen, their tools and techniques. Browse through the yards – peak through the heavy doors of many workshops where traditional boat building skills are being kept alive. Learn boat building skills online, find out about traditional rigging and sail making through these videos.

As part of CYTV's ongoing boat building video session series, the latest walks you through how to hang a hinge – ideal for joinery jobs on your classic boat.

Collars , the spar maker, has just completed a significant repair on the rig of the Laurent Giles designed Bermudan cutter ‘CETEWAYO’, in time for this season’s racing. Here, Jeremy Freeland describes the feeling when it finally returns to the boat and the care of the owner.

Do you know a rebate plane from a wood jack plane?  Find out the difference between the various planes used in classic boat restoration in this video...

Learn how to strip a wooden hull and achieve the perfect smooth finish with this step by step boat building guide.

Cowes boatyard fire causes classics to be lost.

The first in a series of features showcasing emerging figures in the classic boat world, people who share a passion for classics and lend their professional skills to our community. Watch this film 'Timber to Tide' on Ben Harris, a boat builder based in Gweek, Cornwall.

The WOD's or 'Wivenhoe One Designs' were originally launched in 1935 as a local boat to race on the river Colne, near Colchester. Nineteen were launched and now sixteen survive…..

Classic Yacht TV visited TS Rigging in Maldon, to find out and watch the process Ken goes through to steam and bend the wood used to make mast hoops  

Toby Slater left the city of London in 2006 to refit his father’s love affair - formerly known as ‘Regard’ - a Brixham Trawler Yacht. The refit turned into rebuild. He learnt boat building on the job with the help of Rick Cardy's watchful eye, a local shipwright whose skills stem from Thames Barges and alike.

'Tarifa' as a project was instigated by Alex Laird’s labour of love 'Partridge', a J. Beavor-Webb designed Victorian gaff cutter built in 1885 by Camper & Nicholson and mostly influenced by Greg Powlesland's restoration of 'Collinette'… Tarifa's interior sets a standard…

Following on from CYTV’s previous film, again showing progress made to date, it is evident that Kelpie of Falmouth is being careful fitted out. It shows the techniques and quality of craftsmanship going into the work to ensure a very high quality, sympathetic rebuild.

Ever wondered what living on a dutch barge would look like?

Take a look at this amazingly modern and sleek dutch barge conversion is this video...

Captain of the Herreshoff schooner Mariette, Charlie Wroe recently embarked on a mission to find “a suitable racing tender” for his owner's big boat. This film shows you what they acquired and charts the first in an ongoing series on how they restored the yacht.

This film is an insight into the traditional techniques used by James Lawrence Sails, a sail makers that started business at the end of the 'working sail' era. They're seen here repairing a mainsail of 2,906.2 sq foot for a 130 foot classic yacht.

The story of a humble boatyard's most intense job to date – re-rigging the Cutty Sark. Jim Dines of Heritage Marine and TS Rigging reconditioned and made up 2.5 km of wire standing rigging, 14km rope for running rigging, 400 wooden blocks, 700 shackles, 41 spars, 9 mast sections, 17 yards, including one as spare for the Cutty Sark.  

BOAT BUILDING (VIDEO) SESSIONS

Boat building sessions brings you skills, techniques and advice from experts that specialise in classic restoration – Suffolk Yacht Harbour . These short how-to videos can be seen on CYTV's youtube channel or below.

Prevent standing water in between the timber frames of your hull by learning to correctly apply pitch (marine glue) with this simple 'how to' film.

Watch classic boat joinery experts fit new wooden cockpit seats to this stunning 1960s Kim Holman day racer at Suffolk Yacht Harbour .

Do you know a rebate plane from a wood jack plane? Find out the difference between the various planes used in classic boat restoration in this new film. Suffolk Yacht Harbour specialises in classic boat restoration.

A good boat builder never blames their tools, discover the correct way to sharpen your chisel in Suffolk Yacht Harbour's new step by step film.

Learn how to strip a wooden hull and achieve the perfect smooth finish with this step by step boat building guide. Suffolk Yacht Harbour specialises in classic boat restoration.

Do you struggle with varnishing? Watch Suffolk Yacht Harbour's latest boat building film for top tips and a step by step guide to achieving the perfect finish. Suffolk Yacht Harbour specialises in classic boat restoration.

Suffolk Yacht Harbour (UK) shows how to repair a plank on a wooden boat by fitting graving pieces to the planking. Robert, one of Suffolk Yacht Harbour's boat builders, carefully fits a graving piece to the damaged area of the planking to rout out an exact template of a piece of wood to fit the planking.

YACHT DESIGN

From gaff cutters, schooners to fin and skeg classic off-shore racing yachts of the 1950's or, modern classics: Explore the minds of yacht designers from Nathanael G. Herreshoff, German Frers, Uffa Fox, G.U. Laws among many more on Classic Yacht TV.

Get to know the hottest competition on the med circuit in this film. Classic Yacht TV gives you a race on board the highly competitive 'Chinook'. This is rare opportunity to see how the boat is raced, what the crew's jobs are on the boat and how the perfect their manouvres in racing. In addition we bring you interviews from the team that headed up the restoration in Tunisia...

She's a radical looking boat, designed in the 1950's by Uffa Fox who was developing yachts in relation to Flying Fifteen's (One Design Class). Seen here through archive footage of her build and in the most recent of her restorations....

James Dodds’ paintings strike the eye with lines true to his focus on particular boats and the seas they once knew. His pitch dark backgrounds, surfaces, and colours are alike to layers of tar and tallow, marine paint and rust. Part II explores how he achieves his particular colours and, his relationship with local boatbuilders.  

James explores the design of vessels and celebrates the work of the boat builder and craftsman who make them. From a Shetland Fourern boat, a Viking shaped long and thin form to a square, bold, Hastings beach boat. Dodds' paintings are an assembly of observations on the variations in shape and why boats have been crafted in such a way to serve the nation in the maritime industry.

The Mylne Yacht Design archive, which is one of the most complete in the world, comes alive in this film. Here, yacht designer Alfred Mylne is remembered through archive footage of yachts sailing and racing off the west coast of Scotland, around the Isle of Bute and on the River Clyde.

Windward marks, hoists of spinnakers and protests galore make this selection of films on racing classic yachts a must watch. From videos taking you on board  the most successful boat on the Panerai Classic Yacht Challenge circuit in 2015 to the humble – sometimes wet – rides on one designs, CYTV brings you full throttle action in racing!

The 8mR Worlds event in Hankø looks great! Dinner with the King of Norway was on Saturday evening, the location and conditions look stimulating and so do the analytics provided by the race organisers – the Royal Norwegian Yacht Club and the Hankø Yacht Club. Get the daily de-brief here.

CYTV talks to professional rigger Chuck Demangeat about rig failures on board classic yachts and the things you can do to prevent breaking your rig. 

The Baltic Classic Master Cup 2017 will be a circuit again with four international regattas in Sweden and Finland, two in each country. Watch this video to see what it's like.

Lateens, Aegean schooners and work boats are seen here racing alongside classic yachts in Greece's newest regatta - Spetses Classic Yacht Race

The schooner 'Mariette' debuts her newly restored racing tender, “Kelpie of Falmouth” in Cornish waters at the 2014 Pendennis Cup. Watch her sailing in this film - an exclusive look at what's she's like before she starts her season racing the med this week.

Jim Thom reflects on nine years of nurturing and forming a highly acclaimed crew on board the 19 Metre Class designed yacht 'Mariquita' as he stands down as captain and passes the honour on to George Newman.

Classic Yacht brings you exclusive footage and interviews in a two-part series on two classic yachts deemed to be at the very top of their pedigree world-wide. Part 1 features racing between 'Altair' and 'Mariquita' as they compete privately for the 'Club 55 Challenge Cup'.

Being the 'Mate' on a topsail schooner is a busy job – we find out exactly what it's like in this video of Herreshoff schooner 'Mariette of 1915' with their Mate, Roy Kum.

Off the coast of Tenerife Bessie Ellen sails alongside pilot whales, to the surprise of a guest who awoke to hear the commotion.

What happens offshore on board a tall ship like Bessie Ellen? Here's what one guest had to say while sailing from Lisbon to Madeira. Check out what CYTV caught on camera while at sea...

It's only when you sail a tall ship that you really understand their history in context of how people 'worked' them as we hear from on board Bessie Ellen.

Being at sea can be cleansing. It's not just sights and sounds, but the movement of the boat that has a rhythm – it's 'therapy at sea' as we hear from a guest on board Bessie Ellen.

Night watches have a magical feel to them – the experience of isolation, an escape from the digital and fast-paced world we exist in, as we hear from on board Bessie Ellen.

This binnacle was designed to be used on a submarine bridge at the surface. It was small enough to pass down through the hatch when submerging. It's for sale – read more about it here.

In 1968 Sir Robin Knox-Johnston became the first yachtsman to solo non-stop circumnavigate in the Sunday Times Golden Globe Race. It was also in that same race, one competitor Donald Crowhurst lost his mind and was lost at sea. THE MERCY (2018) is a film telling the story of Crowhurst's fate. Here's the trailer...

Everyone's talking about it; the newly released Christopher Nolan film that attempts to chronicle the evacuation of 330,000 men off the beaches and the harbour of DUNKIRK . Featuring MTB102, the white foam on the beaches and the 1958 version of the film to be screened this September...

Archive footage of family cruising on board ZEPHYR during the early 1970's, she's for sale with Sandeman Yacht Company.

Imagine a very cold and extrememly dark environment, underwater and deep below the favourable heights of our atmosphere and then imagine having a camera to capture that unfamiliar world. That's Alexander Semenov's life as head of the....

Cruising on a classic boat provides a kind of medicine for the soul and, when all the elements are in favour cruising can make for irreplaceable holiday experiences - forever etched in one's memory. In these videos, from Prince Rainier III & Grace Kelly's honeymoon on board the MOONBEAM IV to handy recipes for your summer cruise to Brittany, you’ll be inspired to get underway.

A crew member on board Bessie Ellen talks to CYTV about learning how to navigate. How she feels a sense of belonging at sea, in a small community while offshore – blue water cruising.

A first time in the Atlantic Ocean – offshore and in blue waters, sailing. One guest on board Bessie Ellen gives her impressions of 'space', sea sickness and what reaching landfall is like.

An enchanting clip of the great Fife designed yacht, Moonbeam IV cruising off the coast of the French Riviera. Classic Yacht TV caught up with the Captain of Moonbeam IV, here you'll find our Q+A on his life with one of the most stunning classics in existence.

Cooking Orange and Almond cake under sail, on board Bessie Ellen.

Bessie Ellen's owner Nikki Alford gives Classic Yacht TV a lesson in baking while at sea - as you will be able to tell! Using a recipe from the Polpo restaurants in London, this Orange and Almond cake is now a firm favourite for those who sail the Bessie Ellen, a west country trading ketch that charters around Britain, Ireland, Scotland, and Europe.

A short documentary exploring the lost way of life of British lighthouse keepers.

As our world is increasingly automated, this isolated occupation has quietly disappeared from our coastlines, and this film records the stories of remarkable human nature before they too, disappear.

FUTURE CLASSICS

Boats of today, classics of the future.

The defining era of a classic boat is much debated. As creations of ‘neo-classics’ and spirit of tradition yachts are regularly launched this section of Classic Yacht TV will celebrate boats of today and declare some as classics of the future.

From a 70 year old modern-day pirate to a boat builder who remembers the Champagne on the hull of a cutter launched in 1937, Classic Yacht TV covers an array of characters which we think you might enjoy.

The story of a life-long diver and his treasures.

Like a modern-day pirate, 75-year-old Ray Ives has been scouring the seabed for treasure his whole life. The former commercial diver has plundered the deep for over fifty years, bringing to the surface anything that glittered -- even gold.