sailing yacht building plans

RETURN TO  HOME PAGE

MIKE WALLER 

Yacht design.

WE SPECIALIZE IN BOAT PLANS FOR AMATEUR BUILDERS

We provide stock boat plans for both monohull and multihull sailing vessels, including sailing skiffs and sharpies. Our designs mainly feature timber construction, in plywood or cedar strip plank composite construction, using the W.E.S.T. system (wood epoxy saturation technique). Our designs are intended mainly as cruising boats, although several have done well in racing. All designs are suitable for amateur boat builders.

 MONOHULLS

 multihulls  , photos from our builders.

Photo galleries are provided on each design page where available

Step-By-Step Guide: How to Build a Wooden Sailboat – Complete DIY Tutorial

Alex Morgan

Building a wooden sailboat is a rewarding and fulfilling endeavor that allows you to create your own vessel for sailing adventures. Whether you’re a seasoned sailor or a woodworking enthusiast, constructing a wooden sailboat requires careful planning, attention to detail, and a love for craftsmanship. This comprehensive guide will take you through the step-by-step process of building a wooden sailboat, from choosing the right design and gathering the necessary materials to assembling the framework, building the deck and cabin, and installing the sails and rigging. We will also discuss the finishing touches and regular maintenance required to keep your wooden sailboat in optimal condition for years of enjoyment on the water. Let’s dive into the world of wooden sailboat construction and embark on this exciting journey together.

Key takeaways:

Key takeaway:

• Choosing the right design and plans is crucial: Research different sailboat designs and select suitable plans based on your skill level to ensure a successful project.
• Gather the necessary materials and tools: Pay attention to wood selection and preparation, as well as acquiring the tools and equipment needed for building your wooden sailboat.
• Attention to detail in the construction process is important: Prepare and assemble the framework carefully, focusing on lofting, laying out the keel, constructing the ribs, and the hull structure to ensure a sturdy and reliable sailboat.

Choosing the Right Design and Plans

When it comes to building a wooden sailboat, one of the crucial steps is choosing the right design and plans. In this section, we’ll take a deep dive into the world of sailboat designs and explore the vast array of options available. From researching different sailboat designs to selecting plans that match your skill level, we’ll guide you through the exciting process of bringing your wooden sailboat dream to life. So, hop aboard and let’s set sail on this exhilarating journey of craftsmanship and adventure.

Researching Different Sailboat Designs

When conducting research on sailboat designs, it is important to take into account a variety of factors in order to select the most suitable design. One of the primary considerations is whether you prefer a monohull or a multihull sailboat. Monohulls are more commonly found and offer superior performance when sailing upwind, whereas multihulls provide both stability and speed.

Another aspect to consider is your level of sailing experience. If you are a beginner, it is advisable to seek out designs that are easier to handle and forgiving. On the other hand, experienced sailors may gravitate towards performance-oriented designs that are ideal for racing or long-distance cruising.

It is crucial to think about how you intend to use the sailboat. Are you looking for a day sailer , a cruiser , or a racing boat ? Each design comes with its own set of distinctive features and characteristics.

Determining the appropriate size of the sailboat is another crucial step, which should be based on the number of people and activities you plan to have on board. You must also decide whether you prefer an open cockpit or an enclosed cabin .

To find the perfect sailboat design that aligns with your sailing goals and preferences, it is imperative to thoroughly research various options and take into consideration all of these factors. By doing so, you will be able to make an informed decision and select the ideal sailboat design.

Selecting Suitable Plans for Your Skill Level

When it comes to building a wooden sailboat, it is crucial to select suitable plans that match your skill level. This is important as it ensures that you have the necessary knowledge and expertise to effectively complete the construction. In order to help you with this, here is a table that outlines the different skill levels and the corresponding plans:

Choosing the right plans for your skill level is essential as it enables you to navigate the construction process smoothly, avoid any complications, and ultimately achieve the desired result. It is crucial to honestly evaluate your woodworking skills and then select plans that align with your abilities. Keep in mind that building a wooden sailboat demands patience , attention to detail , and a willingness to learn and improve your woodworking skills.

As a pro tip, if you are a beginner, it is advisable to start with simpler plans and gradually work your way up to more complex projects. This allows you to gain experience and confidence in your woodworking abilities over time. So always remember to select suitable plans for your skill level and enjoy the process of building your wooden sailboat.

Gathering the Necessary Materials and Tools

When it comes to building a wooden sailboat, gathering the necessary materials and tools is key . In this section, we’ll dive into the exciting world of selecting and preparing the right wood for your sailboat, as well as the essential tools and equipment you’ll need to bring your project to life. So, start sharpening your creativity and let’s sail away into the realm of wooden boat construction!

Wood Selection and Preparation

Incorporating the provided keywords naturally in the provided text:

1. Conduct research on the different types of wood used in boatbuilding, such as mahogany , teak , or oak . This will help you make an informed decision regarding the most suitable wood for your sailboat.

2. Determine the specific requirements of your sailboat design in order to guide your wood selection process. Each design may have different needs and preferences when it comes to the type of wood to be used.

3. Take into consideration the durability and resistance to rot of the wood options available. This is crucial to ensure the longevity and overall quality of your sailboat. Choosing a wood that can withstand exposure to water and other elements is essential.

4. Look for straight , dry , and defect-free wood. This will contribute to the structural integrity of your sailboat. Any defects or irregularities in the wood may compromise its strength and performance.

5. Calculate the amount of wood needed based on the specific design and measurements of your sailboat. This will help you estimate the quantity of wood required for the construction process.

6. Mill or cut the wood into the required dimensions and shapes as outlined in the sailboat design. This step is crucial for achieving the desired structure and appearance of your sailboat.

7. Prior to assembly, it is important to sand the wood surfaces thoroughly. This will remove any rough edges or splinters, ensuring a smooth and safe finish.

8. Apply a protective coating or sealant to the wood in order to prevent water damage. This will help preserve the wood and extend its lifespan .

By following these steps, you can ensure that the wood selected and prepared for your sailboat construction is suitable and of high quality.

Tools and Equipment Needed for the Project

When embarking on the construction of a wooden sailboat, it is crucial to have the appropriate tools and equipment to ensure successful completion.

To accurately measure and obtain precise alignment and dimensions, essential measuring tools such as a tape measure , combination square , and level are indispensable.

For shaping wooden components, cutting tools like a circular saw or table saw , jigsaw , and hand saw are necessary.

Joinery tools, including a chisel set , mallet or hammer , and drill with different-sized bits, are vital for smoothly joining parts together.

To achieve a polished finish, sanding and finishing tools such as sandpaper with varying grits, sanding blocks , and a random orbital sander are crucial.

Additionally, brushes and rollers are required for the application of finishes.

When it comes to safety, it is imperative to prioritize the use of safety goggles , ear protection , a dust mask , and work gloves to ensure personal protection during the construction process.

When selecting tools and equipment, it is essential to invest in high-quality items that are specifically designed for the tasks involved in wooden sailboat building.

By doing so, not only will efficiency be maximized, but the overall quality of the finished boat will also be greatly enhanced.

Preparing and Assembling the Framework

As we delve into the world of building a wooden sailboat, we now find ourselves in the exciting phase of preparing and assembling the framework. In this section, we’ll discover the essential steps that go into setting up the lofting and laying out the keel , as well as the intricacies of constructing the ribs and hull structure. Get ready to immerse yourself in the hands-on process of bringing this magnificent vessel to life!

Setting Up the Lofting and Laying Out the Keel

To properly set up the lofting and lay out the keel for a wooden sailboat, it is important to follow these steps in a systematic manner:

• Firstly, prepare the lofting area by clearing a large, flat space where the plans and measurements will be placed.
• Next, securely attach the keel stock to the lofting platform, making sure it is both level and aligned with the boat’s centerline.
• Using battens, rulers, and pencils, transfer the measurements and lines from the boat plans onto the lofting platform.
• Ensure the accuracy of the waterlines, buttock lines, and other reference lines on the lofting platform by drawing them according to the measurements provided in the boat plans.
• Utilizing the dimensions indicated in the plans, measure and mark the positions of the keel, stem, and transom on the lofting platform.
• Thoroughly examine and adjust all lines and measurements to guarantee their accuracy.
• Identify the locations where any additional frames, bulkheads, or structural elements will connect to the keel, by marking them accordingly.
• Prior to proceeding, double-check all marks and measurements to ensure their accuracy.

The process of setting up the lofting and laying out the keel is an integral step in the construction of a wooden sailboat. It serves as the foundation and reference points for the boat’s overall structure. It is crucial to pay close attention to detail and maintain accuracy throughout the build. By following these steps, you will be on your way to constructing your very own wooden sailboat.

Constructing the Ribs and Hull Structure

When constructing the ribs and hull structure of a wooden sailboat, follow these steps:

– Measure and cut the ribs: Use the plans as a guide to mark and cut the dimensions on the wood. Cut the ribs accurately.

– Attach the ribs to the keel: Position and attach the cut ribs evenly along the keel using marine epoxy and screws.

– Install chines and stringers: Attach the chines to the bottom edge of the boat and install the stringers along the sides for strength.

– Attach the planking: Cut and fit planks to cover the rib and stringer structure, securing them tightly.

– Reinforce the joints: Apply epoxy and fiberglass tape over the joints to strengthen the structure.

– Shape the hull: Use tools to shape and smooth the hull, paying attention to fairing for optimal hydrodynamics.

– Apply a protective finish: Coat the hull and ribs with marine-grade varnish or epoxy for durability.

– Perform a thorough inspection: Check for defects, cracks, or imperfections and make necessary repairs before moving forward.

The process of constructing wooden sailboats has evolved over time, combining traditional techniques with modern materials and tools. Craftsmanship, attention to detail, and an understanding of wood’s properties are still essential in constructing the ribs and hull structure. This blend of artistry and engineering ensures sailboats can withstand the demands of the sea while providing a smooth and enjoyable sailing experience.

Building the Deck and Cabin

Let’s dive into the exciting world of building a wooden sailboat! In this section, we’ll focus on the crucial element of constructing the deck and cabin. Get ready to explore the process of creating the deck framework and adding those essential interior features . From laying the foundation to crafting a cozy cabin space , we’ll uncover the key steps and considerations for bringing your wooden sailboat to life. So, grab your tools and let’s set sail on this exhilarating construction journey !

Creating the Deck Framework

When creating the deck framework for a wooden sailboat, follow these steps:

• Measure and mark the desired deck size and shape on the boat’s frame.
• Cut and shape the wooden planks or panels to match the marked measurements.
• Align the planks or panels horizontally across the frame, ensuring they are straight and evenly spaced.
• Secure the planks or panels to the frame using screws or nails, ensuring tight fastening.
• Add additional support beams or joists underneath the deck for added strength and stability.
• Sand the deck surface to create a smooth and even finish.
• Apply a weather-resistant sealant or paint to protect the deck from moisture and UV damage.
• Install necessary features or fixtures on the deck, such as hatches, cleats or railings.

Pro-tip: Enhance the deck’s strength and durability by adding epoxy or marine adhesive between the joints before securing the planks or panels.

Installing the Cabin and Interior Features

When building a wooden sailboat, it is important to pay attention to every step, including the installation of the cabin and interior features. To install these features, follow the following steps:

1. First, measure and cut the materials for the cabin walls, floor, and ceiling.

2. Next, securely fit the cabin walls in place.

3. Then, attach the floorboards to the cabin base using screws or nails.

4. Align and install the cabin ceiling.

5. If desired, add insulation for extra comfort.

6. Attach interior features such as cabinets, storage compartments, and seating areas.

7. Install windows and hatches to allow for natural light and ventilation.

8. Properly wire the cabin for electricity, ensuring that lights and outlets are installed and functioning.

9. Finish the interior by sanding and applying a protective coat of varnish or paint.

10. Ensure that all installations meet safety standards.

Precision and attention to detail are key when installing the cabin and interior features of a wooden sailboat. By carefully measuring, cutting, and fitting each component, you can ensure a secure fit. It is important to optimize the layout and functionality of the interior features to create a comfortable living space with ample storage. The addition of windows and hatches will enhance comfort and enjoyment by providing natural light and ventilation . If electricity is needed, proper wiring is essential to ensure necessary lighting and power outlets. Finishing the interior with a protective coat of varnish or paint will not only enhance aesthetics but also provide durability.

Remember, the goal is to create a cozy retreat for sailors, so it is important to put in the necessary effort to install the cabin and interior features correctly.

Installing the Sails and Rigging

Set sail with confidence as we dive into the exciting world of installing the sails and rigging for your wooden sailboat. Discover the key considerations in choosing the perfect sails and master the art of setting up and adjusting the rigging. With expert tips and tricks , this section will equip you with the knowledge to navigate the waters with ease and experience the thrill of sailing your wooden masterpiece .

Choosing the Right Sails

When choosing sails for your wooden sailboat, consider the following factors:

– Type of sailing: Determine if you plan to cruise , race , or do both. Different sails are designed for specific purposes.

– Boat size: The size of your sailboat determines the size and number of sails you need. Larger boats require bigger sails , while smaller boats may need fewer and smaller sails .

– Wind conditions: Consider the typical wind conditions in your sailing areas. Different sails perform better in light winds , heavy winds , or various wind conditions.

– Sail material: The material of the sails affects durability and performance. Material choices include Dacron , laminate , and nylon . Each material has different trade-offs between longevity, performance, and cost.

– Reefing options: If you sail in varied or unpredictable wind conditions, choose sails with reefing options. Reefing allows you to adjust the sail area for stronger winds, improving control and safety.

– Manufacturer reputation: Research sail manufacturers for their reputation and reliability. Read reviews, seek recommendations, and consider warranty and customer support.

By considering these factors, you can make an informed decision when choosing sails for your wooden sailboat. Remember, the right sails greatly impact your sailing experience, so take your time and choose wisely.

Setting Up and Adjusting the Rigging

When setting up and adjusting the rigging of a wooden sailboat, it is important to follow these steps to ensure proper and safe rigging.

To start, attach the mast to the deck using a mast step or mast partner for stability and support. This will provide the foundation for the rigging.

Next, secure the standing rigging , which includes the shrouds and stays , to the mast. This will help distribute the forces from the sails and ensure the stability of the mast.

Connect the forestay to the bow of the sailboat. This will keep the mast in line and control the position of the headsail.

To counteract forces from the headsail and maintain rigging tension, attach the backstay to the stern of the boat.

Use turnbuckles or rigging screws to adjust the tension in the standing rigging. This will ensure proper alignment and support of the mast.

Install the running rigging , including halyards and sheets , to control the position and tension of the sails.

Before and during sailing, it is important to regularly check the tension in the rigging to ensure performance and safety.

Make any necessary adjustments to the rigging during sailing in order to optimize the shape of the sails and enhance the performance of the boat.

By following these steps, you will be able to properly set up and adjust the rigging of your wooden sailboat, allowing for safe and enjoyable sailing experiences.

Finishing Touches and Maintenance

When it comes to completing your wooden sailboat and keeping it in top shape, this section has got you covered. We’ll dive into the art of applying exquisite finishes to the hull and deck, giving your sailboat a stunning appearance. And don’t worry, we won’t neglect the nitty-gritty details of regular maintenance and care, ensuring your wooden vessel remains seaworthy for years to come. So, let’s get ready to add those finishing touches and keep your sailboat sailing smoothly !

Applying Finishes to the Hull and Deck

When building a wooden sailboat, applying finishes to the hull and deck is crucial for durability and aesthetic appeal. Here are the steps to follow:

1. Prepare the surfaces: Sand down rough spots, fill in cracks and imperfections, and ensure a smooth and clean surface.

2. Choose the right finish: Consider the type of wood and desired look. Varnish provides a glossy and traditional appearance, while paint offers different colors and styles.

3. Apply the primer: Enhance adherence and create an even surface for the final coat by applying a primer.

4. Apply the finish: Use a brush or roller to apply the chosen finish coat to the hull and deck. Follow the manufacturer’s instructions for drying times and application techniques.

5. Allow for drying and curing: Follow the manufacturer’s instructions for drying and curing to ensure the finish is fully set and provides maximum protection.

6. Inspect and touch up: After drying, inspect the hull and deck for missed spots or imperfections. Touch up any areas that require additional finish for a seamless and polished look.

By following these steps and applying finishes properly, you can protect and enhance the hull and deck of your wooden sailboat, ensuring it looks beautiful and lasts for many years.

Regular Maintenance and Care for Your Wooden Sailboat

Regular maintenance and care for your wooden sailboat is crucial for its longevity and performance. Here are the steps to follow:

1. Inspect the hull and deck for damage like cracks or rot. Promptly repair any issues to prevent further damage.

2. Clean the boat regularly with mild detergent and freshwater to remove dirt, salt, and grime that can accumulate over time.

3. Apply a protective coating to the hull and deck using marine-grade varnish or paint to prevent water penetration and protect against UV damage.

4. Check the rigging and sails for wear or damage. Replace worn-out lines or rigging components for safe sailing.

5. Inspect wooden components such as the mast, boom, and rudder for rot or decay. Replace or repair as necessary to maintain structural integrity.

6. Keep the interior of the sailboat clean and dry to prevent mold and mildew growth. Use a dehumidifier if needed.

7. Regularly check and maintain the boat’s systems , including electrical, plumbing, and navigation equipment. Address any issues promptly.

8. Store the wooden sailboat in a suitable location, such as a covered boat dock or boatyard, when not in use. Protect it from extreme weather conditions.

Pro-tip: Establish a regular maintenance schedule and keep a detailed record of all maintenance and repairs. This will help you stay organized and ensure your wooden sailboat remains in optimal condition.

Some Facts About How To Build A Wooden Sailboat:

• ✅ Building a wooden sailboat can take approximately 100 hours over a span of 3 months. (Source: Instructables)
• ✅ A wooden sailboat can cost around $1,000 to build. (Source: Instructables)
• ✅ The boat is typically built from 4×8 sheets of plywood and measures 8 feet in length. (Source: Instructables)
• ✅ Various tools such as a pull-saw, table saw, router, sander, and drill are needed for building a wooden sailboat. (Source: Instructables)
• ✅ Fiberglass cloth, epoxy resin, screws, and other materials are used to reinforce and waterproof the wooden sailboat. (Source: Instructables)

Frequently Asked Questions

1. how long does it take to build a wooden sailboat.

Building a wooden sailboat typically takes about 100 hours spread over approximately 3 months.

2. What materials are needed to build a wooden sailboat?

To build a wooden sailboat, you will need 4×8 sheets of plywood, epoxy resin, oak plywood, various tools (such as a pull-saw, table saw, router, etc.), fiberglass cloth, screws, fasteners, and other supplies like glue, clamps, and mixing cups.

3. How much does it cost to build a wooden sailboat?

The estimated cost of building a wooden sailboat is around $1,000, including the materials and tools needed for the project.

4. Can I learn to build a wooden sailboat if I have no prior experience?

Yes, building skills can be learned gradually, and mistakes can be avoided along the way. With patience and guidance from boat building plans, even beginners can successfully build a wooden sailboat.

5. How long is the wooden sailboat described in the reference?

The wooden sailboat described in the reference is an 8-foot long pram, featuring classic lines and made from 4×8 sheets of plywood.

6. Can I launch the wooden sailboat in any body of water?

Yes, the wooden sailboat is designed to be light enough to fit in a small pickup truck or be rolled to a local lake on a dolly, making it suitable for various bodies of water.

About the author

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Latest posts

The history of sailing – from ancient times to modern adventures

History of Sailing Sailing is a time-honored tradition that has evolved over millennia, from its humble beginnings as a means of transportation to a beloved modern-day recreational activity. The history of sailing is a fascinating journey that spans cultures and centuries, rich in innovation and adventure. In this article, we’ll explore the remarkable evolution of…

Sailing Solo: Adventures and Challenges of Single-Handed Sailing

Solo Sailing Sailing has always been a pursuit of freedom, adventure, and self-discovery. While sailing with a crew is a fantastic experience, there’s a unique allure to sailing solo – just you, the wind, and the open sea. Single-handed sailing, as it’s often called, is a journey of self-reliance, resilience, and the ultimate test of…

Sustainable Sailing: Eco-Friendly Practices on the boat

Eco Friendly Sailing Sailing is an exhilarating and timeless way to explore the beauty of the open water, but it’s important to remember that our oceans and environment need our protection. Sustainable sailing, which involves eco-friendly practices and mindful decision-making, allows sailors to enjoy their adventures while minimizing their impact on the environment. In this…

Your shopping cart is empty!

Sailboat Plans 30-40ft

Bruce Roberts sailboat designs

Boat plans 30 - 40 ft  .

This section of Bruce Roberts sailboat designs and boat plans cover the following vessels in the range of 30 to 40 foot. The Roberts, Classic, Henry Morgan, Offshore, Power Cat, PCF 36/40, and Canoe Stern designs. Boat building plans using steel, aluminium, fiberglass wood/epoxy, dependant on the design, are available. Information and prices are on each individual design page.

Study Plan Packages contain all the sheets #1 from the actual plans. Sail Plans and the various accommodation layouts pertaining to the design are shown on these sheets. There may be anywhere from two to eight #1 sheets which are all to scale and which measure between one meter and two and a half meters long each. They are intended as a more in-depth overview of the design in which you are interested.

Material Lists for the basic materials required to build the hull, deck and superstructure are included in the study plan package to help you with your budgeting. Where Fibreglass is mentioned as a material this means Balsa sandwich / Foam sandwich, Single skin or C-Flex. Most steel plans can be adapted to aluminium construction. Both moulded ply and strip plank can be used in conjunction with the wood epoxy saturation method. Sail and rig details are also shown on the study plan sets.

As the Study Plan Packages include the basic measurements in scale for the accommodation layouts, you can customize the layouts to suit your needs if what is presented is not exactly to your liking.

The link to download the Study Plan Packages is emailed to your email address and generally within 24 hours, The link to the Full Plan Sets is also generally emailed within 24. All study plans and full plan sets are downloadable in .pdf format for you to have printed at a nearby print shop. The study and full plan sets are available on CD's on request with postage cost depends on country.

To View drawings , photos, information and prices of the design that interests you just click on that design.

Payments:  We only accept payments through PayPal. This method of payment protects both of us. Please be aware that there is no obligation or need to be a member of PayPal to use them to pay us using the normal various methods of payment.

Pram Dinghy Boat Plan

Roberts Pram Dinghy This Pram dinghy can be built in fiberglass or plywood. The pictures sho..

Classic 31 Boat Plan

Roberts Classic 31 This is an earlier design that some traditionalists may find appealing. It may..

Roberts 310 Boat Plan

Roberts 310 This design may be built with either a regular trunk cabin or a pilot house. It is al..

Henry Morgan 32 Boat Plan

Roberts Henry Morgan 32 This is an earlier design that traditionalists may find appealing. It is ..

Roberts 34 Boat Plan

Roberts 34 This is an earlier design that still enjoys a great amount of popularity. It has been ..

Canoe Stern 341 Boat Plan

Roberts Canoe Stern 341 Designed by Graham Shannon this is for those of you that are looking for ..

Roberts 345 Boat Plan

Roberts 345 Originally this was designed for lightweight frameless multi-chine steel construction..

Roberts 35 Boat Plan

Roberts 35 This is a classic modern design that has been built as a production boat in many parts..

PCF 36-40 (Pacific Coast Fisherman) Boat Plan

Roberts PCF 36-40 (Pacific Coast Fisherman) This design may be built as a motor sailer for family..

Roberts 36 Boat Plan

Roberts 36 This design is a well proven world cruiser as many are currently sailing in different ..

Roberts 370 Boat Plan

Roberts 370 Such has been the response to this design that plans for it's construction are availa..

Offshore 38 Boat Plan

Roberts Offshore 38 Full plans for this design are available for building in round bilge Fibergla..

Power Catamaran 39 Boat Plan

Roberts Power Catamaran 39 These catamarans were designed to be built using the fibreglass panel ..

Roberts 39 Boat Plan

Roberts 39 This design is available only in multi-chine hull form, sloop or, with the addition of..

Roberts 392 Boat Plan

Roberts 392 This design is a companion to the Roberts 39 which until now had only been available ..

Roberts 40 Boat Plan

Roberts 40 This design comes with either a centre cockpit or a pilot house layout. There is adequ..

Messing about in boats since 1975.  Online Since 1997.

Home   |  Intro   |  Our Design Process   |  Stock Design Info   |  Motor Yacht Designs   |  Sailing Yacht Designs   |  Prototype Designs Plans List   |  Articles   |  Our CAD Design Stream   |  Maxsurf   |  News..!   |  SITE MAP..!   |  Site Search   | Design Team   |  Contact Us Please see the  AVAILABLE BOAT PLANS web page

Power and Sailing Yacht Plans List Copyright 2023 Michael Kasten Updated April  2023 This page provides a list of our currently available boat plans, a link to the web page for each design, and a price for each design.  What Do Plans Cost..? Below is a list of prices for each plans package that we offer. The first group lists our Sailing Yacht Designs and the second group lists our Power Yacht Designs .  Some designs are COMPLETED and others are INCOMPLETE.      COMPLETED STOCK DESIGNS :  The Estimating Plans and Building Plans prices given below in BOLD BLACK TYPE are for a FULLY COMPLETED STOCK DESIGN , the plans for which can be shipped immediately on receipt of your order.   Please see our Stock Design web page for a description of what is included, and how our prices have been determined.    INCOMPLETE OR 'SEMI-STOCK' DESIGNS :   Prices given below in PLAIN TEXT indicate plans that are INCOMPLETE.  WHY , you may ask, have I even bothered to list INCOMPLETE designs below...? Since people's circumstances often change, it is inevitable that some boat design projects will be abandoned before they are finished, and in some cases after considerable work has been done.  This can occur as is so well described in the first few pages of Rockwell Kent’s excellent non-fiction sea story, “North by East” , or as the result of a change of fortune, failing health, or for a myriad of other reasons. A few of the INCOMPLETE designs listed below (not very many) have been developed on my own, in other words, with myself as the 'client'.  Others have been created at the behest of an individual client to explore an idea or a concept.  Either way, I believe all of the designs listed below have merit.  We offer these INCOMPLETE designs at a substantial discount versus what it would cost to develop an entirely CUSTOM design, the difference being that the 'discovery' phase of the design process has already been accomplished.  Even so, there is still quite a bit of WORK REMAINING in order to complete the Plans Packages for those INCOMPLETE designs.  The prices given below reflect our actual cost to complete the Estimating Plans or the Building Plans Package for each design, assuming there will be no changes to the design as it is presented.  If you take umbrage with the cost of our INCOMPLETE designs, I urge you to read our Learning Yacht Design web page.  If one of the designs below is "close" to what you have in mind but you would like to tweak it some, I will be pleased to provide a detailed estimate for any revisions you have in mind.  If any of these designs is of interest, please inquire .    CUSTOM YACHT DESIGN :  A new CUSTOM design will necessarily include the process of " discovery " which represents Stage I of the design process, during which all options are on the table including size, type, configuration, layout, rig, materials, etc.  By comparison, given that many of the INCOMPLETE designs listed below have already had a considerable amount of design work done, very roughly the cost to create a CUSTOM design can be on the order of some 20% to 50% greater than the prices listed for the INCOMPLETE designs below, in order to accommodate the "discovery" process on the way to achieving a completed set of Building Plans.  Is the added cost worth it...?   Yes , we believe so. Please see our article on Custom Yacht Design for our best answer to that question, where you will also find an overview of the design process itself.  Our Design Stream article additionally describes how we use CAD to best advantage throughout the design process. If a new Custom Yacht Design is of interest, please inquire for more information.    COMPLETED NC CUTTING FILES :  There are several designs below for which NC Cutting files are ALREADY DEVELOPED , in which case the price is in BOLD BLACK TYPE .    DEVELOPING NEW NC CUTTING FILES :  All other NC Cutting File prices are listed in PLAIN TEXT, and reflect our actual cost to develop NC Cutting Files for that design from scratch, in which case they can be developed for metric or imperial dimensioned materials as needed. Please see our CAD Design Stream article for more information about our NC development process.    ORDERING INFORMATION : All prices are given in US Dollars and are subject to change at any time.  To place an order, please see our contact information below. To order by fax or by mail, a PDF Order Form has been provided for your convenience.    What's Included...? Estimating Plans - Building Plans - NC Cut Files... ESTIMATING PLANS :  Since all the basic information about each of our designs is available here at our web site, and for free, we no longer offer basic Study Plans.   Instead, we offer a much more useful and complete Estimating Plans for each of the designs listed below. Our Estimating Plans include the following: Drawings:    Sail Plan / Exterior Profile Drawing Interior Profile & Arrangement Drawing (one to four sheets, depending on vessel size) Structure Drawings (one or two additional sheets, depending on vessel size)    Documents:    Drawings & Documents List Written Vessel Specification Detailed Equipment List Structural Scantling List Laminate Schedule (if needed) Structure Weight & Surface Areas Builder Short List appropriate to the specific design Cover Letters to Builders re: scope of project, etc.    Our Estimating Plans are useful for study, planning, commentary, or mark-ups in the event you want to consider variations on the layout or the rig.  Primarily though, the Estimating Plans are intended for Cost Estimating .   Considering the price lists given below, the Estimating Plans represent an outstanding bargain and include quite a lot of useful information. Our Designer's Cover Letter serves as an introduction to the builder and outlines the scope of our involvement.  Our Owner's Cover Letter is a template which you can modify as needed in order to provide an introduction to the builder; to outline your intended build timing; and to let them know what stage of completion you intend their quotation to cover. NOTE :  Estimating Plans do not contain sufficient detail for actual construction of the vessel.  However the Estimating Plans do provide enough information so that builders can provide a firm quotation for construction, and to allow a preliminary construction contract to be negotiated.    BUILDING PLANS : Prior to your construction contract being finalized, and in order to actually build the boat, the complete Building Plans will be required.  Our Building Plans include all the contents of our Estimating Plans as listed above, plus all the remaining detail drawings required for construction, including the following: Drawings:    Lines Drawing Offsets (if not CNC cut) Structural Sections Joinery Sections Joinery Details Construction Details (Several Sheets Including Hull & Deck Fittings; Ports; Doors; etc.) Spar Plans (Sail: Several Sheets Including Spar Dimensions; Spar Fitting Details; etc.) Machinery Plans (Power:  Several Sheets as Needed) Numerous Detail Drawings as Needed       Vessel Design Data, including:    Hydrostatics & Trim Stability Compliance Report Performance Analysis Hull Data for Propeller Calcs Endurance & Range Under Power    Building Plans also include a thorough review of and revision of the Equipment List and Vessel Specification in order to suit your specific equipment preferences. If the drawings or documents require further revision for your use, for example to make changes to the layout or the rig, we'll be pleased to provide an estimate for making those revisions. Please see our Stock Plans page for more information about what's included, and how we can customize a stock design to suit your requests.    CUSTOM DESIGN : We can modify any of our Stock Designs to suit a newly defined purpose, or we can work with you to create an entirely new design based on your requests. Please feel free to inquire about any modifications you may have in mind, or about creating a new Custom Design to suit your specific requirements.  In way of inspiration we have provided quite a variety of Prototype Designs , any one of which can be modified as needed to create a fully completed yacht design.    NC CUTTING FILES : Several of the Stock Designs listed below for construction in metal have already been developed for automated NC cutting of the metal parts. "NC" simply means 'Numerically Controlled' - a technology for creating pre-cut boat parts directly from the 3D design model. For details regarding the benefits of NC Cutting and to find out what's included with an NC Cutting File Package , check out our article on Our CAD Design Stream and the articles linked from there.    MORE INFO :  Please see our Site Map to quickly find any of our designs, to peruse our portfolio, and to find our articles on a variety of boat related topics.  

What Will the Boat Cost..?

This is the most difficult question of all, and one for which I do not have a ready answer.  However it is a question that ultimately does have an answer...!   For any meaningful cost discovery it is necessary to solicit actual quotations for construction from a short list of qualified builders. 

For that purpose, we offer completed ESTIMATING PLANS for several of the designs listed below, with their prices listed in BOLD BLACK TEXT .  For any designs listed below that are INCOMPLETE, we have also provided the cost to develop ESTIMATING PLANS for that design, the prices for which are given in PLAIN TEXT.

Please see the following articles for information about boat costs, and about the process of soliciting estimates from builders:

The Cost Question | Affordable Boatbuilding | Estimating Boatbuilding Costs | What Will the Design Cost..?   

SAILING YACHT PLANS  

IMPORTANT - Please see the Introduction above which describes the difference between  the prices given in BOLD BLACK TEXT vs the prices given in PLAIN TEXT below.

Please also see the AVAILABLE DISCOUNT information below.  

*  See notes below about Aluminum vessels. ** See notes below about Wooden Vessels. *** See notes below about NC Cutting Files .  

MOTOR YACHT PLANS

* See notes below about Aluminum vessels. ** See notes below about Wooden Vessels. *** See notes below about NC Cutting Files .  

AVAILABLE DISCOUNTS  

• The cost of Building Plans given above includes the cost of the Estimating Plans for that design..   
• If you order STOCK Building Plans within 90 days after purchasing STOCK Estimating Plans (for the same design), we will deduct half of what you paid for the STOCK Estimating Plans (less shipping) from your order.   
• The cost given above to complete the Building Plans for an as-yet INCOMPLETE design includes the cost to develop Estimating Plans for that design.  
• If you first arrange for completion of as-yet INCOMPLETE Estimating Plans, the subsequent cost to develop Building Plans for that design will be reduced by the full cost of having developed the Estimating Plans for that design.  In other words, the INCOMPLETE Building Plans prices given above already include the cost to develop the Estimating Plans.  
• For ALL orders, if an already completed set of STOCK NC Cutting Files are ordered along with an already completed set of STOCK Building Plans for that vessel ( both paid for in full at the same time ) we will provide a discount of 10% off your entire order.  And... this discount may be applied in addition to either of the above discount options..! Note however that this does not apply to any of our designs for which the NC Cutting Files or the Design itself remain INCOMPLETE.  

For additional clarification of the above discounts, please inquire .  

IMPORTANT DESIGN NOTES

GRP or PLYWOOD : Any of our Aluminum or Steel designs can be converted for construction in GRP or cold moulded plywood. The cost of any such revisions will be quoted separately. For more information, please inquire .

STEEL : Any Steel vessel can easily be re-specified with an aluminum structure. To convert a stock steel design to aluminum, please add 20% to the cost of the Estimating Plans or the Building Plans for that design.  Conversion of NC Cutting Files from steel to aluminum will however require a completely new set of NC cutting files, for which please inquire for an estimate.

* ALUMINUM : The Aluminum vessels listed above can only be built in steel if the design is extensively modified for that purpose in order to accommodate the added weight of the structure. For more information, please inquire .  Conversion from aluminum to steel will also require a completely new set of NC cutting files, for which please inquire for an estimate.

** WOOD : Please note that our large Wooden Vessel plans are generally priced higher, since revisions will nearly always be required in order to accommodate the differing wood species that will be available for construction, and the consequent differences in scantlings and overall weight. Those revisions (within reason) are included in the prices indicated above.

*** NC CUTTING FILES : Although a complete Building Plans set is required in order build any of these boat designs, the NC Cutting Files are entirely optional . In other words, the Building Plans are required , even if you purchase the NC Cutting Files for that design. The cost of NC Cutting Files is in addition to the cost of the Building Plans. Please see above for discount options that are available...

The NC Cutting Files shown above with prices given in BOLD BLACK TYPE have already been developed , in which case they will have been created for either metric or imperial dimensioned materials, and for either steel or aluminum (noted in parentheses).

If the vessel will be built in a location that requires changing the measurement system , and / or if there is a change from steel to aluminum or aluminum to stee l structure, then additional work will be required, the cost of which will be quoted separately and in addition to the above prices. Should such changes to any of our designs be of interest, please inquire for an estimate.   

YACHT TENDERS

Our aluminum yacht tenders are the perfect companion to any of the yachts described above.

8' to 14' Prams - Building Plans: $250 . NC Cutting Files: $250 . (The Building Plans are required. The NC Cutting File is optional. The cost of the NC Cutting file includes interacting with the cutter of your choice to assure compliance with their cutting equipment.)  

PROTOTYPE YACHT PLANS

If you don't see a design here that suits your requirements, please see our Prototypes web page for links to other designs that are either under development, or that may offer a few possible ideas in way of inspiration...

Preliminary study sketches may be available for some of our Prototype Designs. If you would like to know more about one of them, please inquire .  

NACA Foil Shaped Low Drag Aluminum Paravanes

Please see our Roll Attenuation article for more information on Paravanes for Motor Yachts.

These low-drag paravanes are balanced and are adjustable for different speeds. They make use of NACA foil shaped surfaces combined with a lead ballasted NACA foil shaped bulb. They are designed to be machined out of marine grade aluminum plate and rod so that they can be shaped, and so they are lighter for a given wing area than steel paravanes would be.

The sizes given above are conservatively rated. In other words each size can be used on a larger vessel than is indicated. It is all a matter of degree. The roll attenuation will simply be more or it will be less, as compared to that of a larger or smaller wing area.

Paravane effectiveness is a function of wing area and pole length vs. your vessel’s righting moment. With a larger the vessel the poles can be made longer, achieving greater leverage, therefore a greater effect for the same size paravane.  If you have an existing vessel on which you would like to install these paravanes, but you don't have a paravane rig, we can provide a design for the rig that will fit your boat.

For more information, please inquire .   

ORDERING PLANS...

Addresses in north america.

PAYMENT OPTIONS : If you would like to make a purchase from the above plans lists, please use our PDF Order Form or please feel free to contact me for additional information. Our payment options are as follows:

• Bank Check : For orders within the US up to USD $500 your personal check will be suitable. For orders from Canada, a money order or a cashier's check drawn on a US bank in US funds will be equally suitable. For all personal check payments we will wait until your check has cleared prior to sending out your order (for domestically issued cashier's checks or money orders, clearance takes a minimum of 7 business days after it has been deposited ).
• Pay Pal:  For orders of up to USD $1,000 payment may be made via Pay Pal.  Please inquire for details.
• Credit Card : For orders of up to USD $1,000 payment may also be made by credit card (Visa, Master Card, Amex) by using our PDF Order Form . The amount billed to your credit card will be the cost in US dollars. The cost in foreign currency will depend on the exchange rate applicable at the time of the transaction. A transaction fee of 5% will be added to all credit or debit card orders.
• Wire Transfer : For ALL amounts above USD $ 1,000, a direct wire transfer is required (most secure, fastest and least costly). Please inquire by FAX or by email for our wire transfer details. See our FAX number below, or please use our PDF Order Form where our FAX number will also be found.

Please note that all prices given on this page are subject to change at any time at my discretion.  

SHIPPING OPTIONS : For standard first class mail sent to any address in the US or Canada, or for airmail sent to Mexico, please add USD $60 to cover mailing costs. For US Priority Mail to US Addresses, please add USD $75. For US Express Mail to US addresses or for US Global Priority Mail to Canada please add USD $95. For FedEx standard overnight delivery in the US and Canada, or FedEx International Economy to Mexico please add USD $175.   

FREE DELIVERY...! Delivery via email is easy, and is encouraged. It is by far the fastest and most economical way to receive your plans. If you elect this option, delivery is FREE . If you accept delivery by email, we will send you all drawings as PDF plots, and all documents as PDF's, ready for printing and / or plotting, which is easily accomplished at your nearest copy shop.  

Addresses Elsewhere Worldwide

PAYMENT OPTIONS : If you live outside North America, our payment options are as follows:

• Bank Check : For any amount up to USD $ 1,000, if you wish to pay by cashier's check or money order, it should be drawn on a US bank in US funds. It is most secure when sending funds to use a courier service such as DHL, FedEx, EMS, UPS that provide online tracking, rather than regular postal mail delivery service. If sending a cashier's check by courier, please inquire for our physical shipping address. For all payments made by check or money order we will wait until your check has cleared prior to sending out your order (for foreign issued cashier's checks or money orders, clearance takes a minimum of 10  business days after it is deposited ).
• Credit Card : For orders of up to USD $1,000, payment may also be made by credit card (Visa, Master Card, Amex) by using our PDF Order Form . The amount billed to your credit card will be the cost in US dollars, plus shipping. The cost in foreign currency will depend on the exchange rate applicable at the time of the transaction.  A transaction fee of 5% will be added to all credit or debit card orders.
• Wire Transfer : For ALL amounts above USD $1,000, a direct wire transfer is required (most secure, fastest and least costly). Please inquire by FAX or by email for our wire transfer details. See our FAX number below, or please use our PDF Order Form where our FAX number will also be found. 

SHIPPING OPTIONS: For addresses in Japan, Korea, Australia, New Zealand, Scandinavia, England, or any country that uses the Euro Currency, please add USD $150 for 3 to 6 day delivery via US Global Priority Mail . For faster delivery by courier (DHL, FedEx, EMS) or by US Global Express Mail please add USD $250 (usually takes 3-4 business days).

Please note that regular postal mail service s of any kind are not offered to destinations other than those listed above. In most other locations, regular postal mail has proven to be extremely unreliable.  For destinations not listed above, please add USD $350 for 3 to 4 day delivery by courier (DHL, FedEx, EMS). We will select the best delivery method depending on your location.    

FREE DELIVERY...! Delivery via email is easy, and is encouraged. It is by far the fastest and most economical way to receive your plans. If you elect this option, delivery is FREE. If you accept delivery by email, we will send you all drawings as PDF plots, and all documents as PDF's, ready for printing and / or plotting, which is easily accomplished at your nearest copy shop.  

KASTEN MARINE DESIGN, INC. Email us for our mailing address or to arrange a phone appointment.

PDF Order Form  

Please see the  AVAILABLE BOAT PLANS web page. Home   |  Intro   |  Our Design Process   |  Stock Design Info   |  Motor Yacht Designs   |  Sailing Yacht Designs   |  Prototype Designs Plans List   |  Articles   |  Our CAD Design Stream   |  Maxsurf   |  News..!   |  SITE MAP..!   |  Site Search   | Design Team   |  Contact Us

• All Web Site Graphics, Layout, and Written Content at this Domain Created by Michael Kasten.
• All Graphic and Written Materials at this Domain Copyright © 1989 - 2023 Michael Kasten.
• All Content Registered with US Library of Congress and US Copyright Office.
• Copyright Violations will be Prosecuted. All Rights Reserved.

Click here for details of the Terms & Conditions, Use of our Plans, Back-up, SFDesign Philosophy etc

James Wharram Designs

Search Our Site

• Self Build Boats
• Professionally Built Boats
• Choosing a Boat
• How We Design
• Photo Gallery
• Video Gallery
• Articles & Blogs
• Wharram World
• Boat Building Plans

Wharram Shop

• Study Plans
• Merchandise
• Papers and Articles
• Limited Edition

Complete, clear and detailed plans to build your own Wharram Catamaran, that have often been described as a 'course in boat building'. All Wharram building plans are drawn for the first time builder, so anyone with a modicum of practical ability can build one of our designs. Wharram designs are all based on decades of actual building and sailing experience of the boats, so you can be confident in its sailing capabilities and safety.

Optimist Sailboat Build

Introduction: Optimist Sailboat Build

Building the Wood/Epoxy Optimist In 1947 a gentleman named Clark Mills designed a small sail boat for kids to learn to build and sail called the Optimist.  This boat was designed to be built from 3 sheets of plywood, with basic woodworking abilities.  As time progressed, builders began to modify the boats to gain speed advantages - as happens with all vehicles. In 1995 the International Optimist Association took the boat back to its roots and a set of dimensions were compiled to retain an exact shape of the boat, so as to remove design advantages from one boat to another.  The Optimist is tightly controlled now with over 60 measurements and tolerances of the hull are generally +/- 5 mm.  The tolerances do not allow the builder to exploit the possible variations of shape of the hull, but do allow a competent builder to construct a legal racing hull.  Half Moon Bay Yacht Club has a summer youth sailing camp.  Through the years we have trained many a young boy or girl to rig and sail the small boats available to us.  Normally in an older Laser or Coronado 15.  In 2011, the sailing program decided that the Optimist had a place in our sailing fleet to allow the younger kids (7-15) to rig, launch, sail and retrieve the boats themselves while under adult supervision.  We set about looking at the building of wood/epoxy Optimist sailing boats.  We quickly focused on making racing legal hulls so as to be competitive with other surrounding sailing clubs.  This is where the accuracy and repeatability of the ShopBot CNC router at TechShop of  Menlo Park www.techshop.ws became an invaluable tool in our fleet building.  I made it at TechShop.  Due to the close tolerances allowed, and the desire to have an almost identical fleet of boats, the ShopBot  fit the bill to the letter.  Once I redrew the plans into CAD drawings and transferred to cut files the different parts of the boats were identical.  Each group of people that wanted to build a boat only had small amounts of fitting, beveling and gluing to accomplish, with very little use of dangerous equipment needed and quick progress to show for their efforts, so kids fit right into the task of building boats.

Attachments

The jig produced on the ShopBot retains the correct shape and supports the boat, while it is being built, to retain the exact design measurements. The plans for the boat can be found from many sources for free on the internet.   Plans are available in many languages, as well.  One such source is http://www.optiworld.org/Woodguide05.pdf Another guide to building an optimist is http://www.burcotboats.co.uk/howToBuild.pdf , as well as half a dozen other well written articles on the internet. But none provide CAD quality drawings or files to work with modern computer controlled machine tooling. Well, here they are:  The jig as well as the major parts of the boat.     The jig sides , mast step, rudder, dagger board , dagger board case ends and doubler pieces are made from 18mm or 3/4" ACX or marine grade plywood; (1219.2mm x 2438.4mm) 48" x 96".

Now to get started, the jig we have designed is the exact dimensions of a finished hull shape. Both ends of the jig have interlocking pieces to allow for inserting and removing as needed during the building of the boat. The cross members are standard 2" x 4" cut to 44" long and with a 3/4" dado 8" to each side of center to fit into the grooves of the forms. These should be cut so as to be flush with the top of the form and screwed into place to prevent movement. The bottom boards provide a stable platform for the jig to sit on. The jig should be placed on a flat surface for the build, as distortion to the jig will transfer to the boat being built. Save the scraps for blocking.

The file for the hull bottom, midship frame, dagger board case sides and corner braces are cut from one 4' x 8' sheet (1219.2mm x 2438.4mm) of 12mm Marine grade plywood  If you save your larger scraps for doubling plates and gunwale rails, you will have very little waste.  The first cuts should be for the 6mm deep dado at both ends of the hull to join the bow and transoms to.   The second cut should be for the dagger board trunk cut out.  The third cut should be the outline of all the pieces.  In order to fit both sides of the dagger board trunk on one sheet, one side will have a joint to be epoxied together to match the other side.

The next setup  should be for 6mm plywood.  Again a 4' x 8' sheet will make both ends, both sides, mast thwart frame and again scraps can be used for doublers and clamping pads. You now have a boat cut and ready for a little fitting.  Bevel the edges of the bottom to the approximate angles of 15 degrees with a block plane and you are ready to start your build.  I would recommend a dry fit of all parts prior to mixing epoxy.  This doesn't take long and may save you a lot of trouble with messy epoxy. 

Center the bottom in the jig, stand on it to bow it and hold it down, and temporarily screw it to the 2" x 4" 's 130mm each side of center line to allow for gluing of the doublers without covering the screws, so they can be removed later.  The holes will be filled in when the boat is removed from the jig with epoxy.  Rip a 4' x 8' sheet of 4mm plywood into 1- 240mm strip and 2-80mm strips with a 45 degree beveled edge.  This can be done on the ShopBot or a table saw.  These are the doublers for the bottom to meet design minimum thickness while saving weight.  Once these are epoxied into place and trimmed you are ready to install the sides, mid ship frame, bow and transom.  The mid ship bulkhead can be used to position the strips in the correct place on the bottom of the hull.  Once these are epoxied in position, placing some weights on top, until cured, works well.  You will be covering the dagger board slot, but that can be easily cut out once the hull is removed from the jig and turned upside down for fitting the dagger board trunk and filling of screw holes.

The plans show two temporary braces.  These can be made from any scrap plywood and are used to hold the proper shape of the sides while doing the assembly and glue up.  Once the gunwale rails are installed these will be removed and discarded.  The bow and transom fit into the dado at the front and rear of the hull bottom panel.  The sides wrap around the outsides.  A couple small blocks of wood screwed onto the jig at the bow and stern help in keeping the sides in position while clamps are applied.   A small slot cut into the two forward jig pieces to allow a small bar clamp of your choice works well to hold the two sides together tightly.  Once you are comfortable with the fit of all the parts your ready to mix epoxy.  Wet out each side with unthickened  epoxy.  Then add a small layer of thickened epoxy and assemble with the temporary braces and mid ship brace installed.  Next is the mast deck and thwart.   Fit and epoxy in place.  Some of the scraps of 18mm can be used for the doubler in these areas.  You can install the bow and transom doubler before or after this step.

Gunwale rails and rub rails are next.  You can use layers of plywood or fancy colorful woods if you plan to use a clear finish to show off your work.   Build up the layers until you get to the final thickness required, per the plans.   Rip 1 for each side of boat starting with a 45mm wide piece stepping down 5mm for each 10mm of thickness.  Cut out pockets for and install the corner blocks next.   Form and shape the rails to the required shape and thickness and you are ready to remove the boat from the Jig.  We used a hand planer for the rough shape and finished with a belt sander.  It will now hold its shape and dimensions.  The jig can be used as a cradle to support the boat as you work on it either upside down or right side up.

Once the boat is removed from the jig, it can be turned over and all joints filled with thickened epoxy.  Install the dagger board trunk through the hull and epoxy in place.  We choose to put our club logo and hull # on the sides of the dagger board trunk.  Once again the ShopBot makes this a blank canvas for your artistry.  Below one of the boys is rounding the edges before the dagger board trunk is installed.  Shape the bottom of the dagger board trunk  to conform to the hull bottom from the outside once it is cured in place.  Install the doubler pieces on the inside to help support the dagger board trunk.  We installed a few wood dowels into the midship frame to add strength as well.   Sand, epoxy and finish the exterior of the hull as desired, with either paint or a clear finish.  On the inside of the hull fillet the joints with thickened epoxy.  Install the flotation attachment pads, and main sheet block pad.  Sand, epoxy and finish the interior of the boat as desired and the hull portion of your sail boat is ready for hardware installation.  We chose white enamel for the insides for a cleaner look.  You will also find the plans from one of the internet sites below.  Download these and print copies to have available as you work. 

To build a race legal hull requires a measurement by a certified Optimist qualified measure person.  Plan on 4 hours or more for this process.  The PDF file is the list of measurements for the hull.  The tolerances are close, but with the use of the CNC controlled cutting you should have a race legal hull that your kids can be fully involved in the building of.  The dagger board piece and rudder that was cut will need to be shaped and profiled.  Again we used a plane for the rough shape, followed by the belt sander.  Hardware kits are available online as well as sails, spars, FRP rudders and dagger boards at very reasonable prices.  One such site is : http://www.mauriprosailing.com/Optiparts-Optimist/Optiparts-Optimist.htm?gclid=CKHtt7O1t64CFQ9-hwodHBRhrA

Sail Plan The sail can be home-made, as well, but with mass production the prices just are hard to beat.  Again the spars can be made from PVC pipe, Wood or Aluminum tubing, but most can be purchased for a cheaper price than your time and investment.   You probably won't need the hottest racing level gear until you see if your kids are in for it.  Then watch out if they catch the bug!  You will be one proud parent to have started them out on such a great and rewarding life of sailing. http://www.mauriprosailing.com/Optiparts-Optimist/Optiparts-Optimist.htm?gclid=CKHtt7O1t64CFQ9-hwodHBRhrA

Finalist in the ShopBot Challenge

Participated in the Make It Real Challenge

Recommendations

Made with AI - Autodesk Design & Make - Student Contest

Green Future Student Design Challenge

Make it Resilient

Boat Building Plans – 518 Boat Designs With Step By Step Tutorial Guide, Videos, and Tips

If you are new to boat building and want to pursue it as a part-time activity then you must look for easy boat building plans that will not only save you time but also energy. 

Even if you are an experienced boat builder, you will need a boat building plan that guides you through the whole process till completion. That is why we decided to come up with an incredible boat building plan.

Building a boat from scratch without any plan, knowledge or experience is like choosing the path of failure and regrets. Without Boat Building plans, most end up scraping the complete project at the end after a lot of trying. Instead of burning money on experiments, one should invest in training videos, proper layouts, plans, and blueprints. 

High-quality boat plans and step-by-step simple instruction videos can make boat building easier than you ever thought . If you have always wanted to build your own dream boat then now is the time. Building Boat Plans contains over 500 boat plans, tons of training videos, detailed specifications, CAD software, and building guides.

Keep reading, we are going to answer all your queries and give you a new dimension for boat building. Scroll down in order to get to know about one of the most legit plans namely “ My Boat Plans ” by Martin Reid .

What are Boat Building Plans?

Boat Building Plans is a thorough guide based on step-by-step plans that can help you build boats without any prior experience. You will have instant access to over 518 illustrations of boat designs with detailed specifications and boat construction tips. 

This comprehensive boat building plan comes with over 40 video tutorials that give you easy tutorials to construct beautiful boats . You can design your own custom boat with the help of CAD software and 3D photographs that make this whole process much easier.

This easy plan can save you hundreds of dollars, that are usually needed to hire an instructor to build a boat. These 3D illustrations are nothing but an incredible bonus for those who want new ideas to create their dream boat. 

In addition to this, this boat building plan helps you to start from scratch. Even the creator of this program has started from the bottom line and now  has over 3 decades of experience.

Creator Of Boat Building Plans

Now that we have given you a little introduction about this boat building plan, you must be wondering how can you trust the legitimacy and reliability of these boat designs.

So,  Mr. Martin Reid  himself started as a rookie who was caught up amidst several unattended and aborted projects. There were certain issues in each project because he started boat building on it’s own without any authentic boat building plan. But after all this disappointment he stands firm and eventually he stumbled upon a boat building master who pointed out the flaws that were left unchecked.

With the help of an experienced instructor all of his projects got completed in no time. And that was when Martin Reid decided to create a program that pays special attention to all the details that are usually left by rookies. Because of his decades of experience in boat building, he is able to point out all the problems that first-time boat builders have to go through.

Hopefully, this real story of the creator has motivated you to take the first step towards boat building without any hesitation.

Features Of Boat Building Plans

Boat Building Plan will guide you to become an advanced boat maker from a very beginner. It’s all techniques that you will learn in the process. It does not matter if you want to build the boat as a hobby or for your business. Here are some of the reasons why you should choose Boat Building Plans:

• Detailed description of 518 different boat designs with easy-to-follow construction techniques
• 40+ video tutorials with 100+ illustrated guides for a better understanding of design and material handling.
• Step-by-step beginner-friendly blueprints on boat building.
• 3D images and colorful illustrations complement this boat-building plan.
• Designed by a professional with detailed specifications for rookies
• Free updates are available for a lifetime.
• Secret tips about building boats easily
• Mistakes to avoid as a novice builder.
• Easily Downloadable and Compatible with every device
• Instant access to all videos – No shipping hassle
• ClickBank Secure Payment Gateway
• 60 Days No Question Asked Money Back Guarantee
• Trusted by 10000+ people worldwide

What is inside the Boat Building Plans?

Here we will be enlisting the content of this boat building plan that helps it stand out among the other courses available on market right now. As this boat building plan is created by a professional so you will be able to differentiate how it differs from other courses that usually turn out to be nothing but failure.

1) Boat Building Guide

In this boat building plan by Martin Reid, everything is explained in a very professional and easy manner. The whole process of boat building is narrated in a very precise way so it is easily understandable for a newbie. Martin has pointed out all the details that are usually left behind and eventually lead to disasters.

2) Boat Building Video Tutorials

There are up to 40 video tutorials that comes in this boat building plan. These tutorials give a complete overview of boat building techniques along with information about  material handling  and other procedures including boat building and repair.

3) Detailed Specifications and Images

Having a 3D illustration is necessary if you want your project to turn out to be a real masterpiece. In this package of the boat building plan, you will be able to get up to 518 different images with detailed specifications to carry out your plan without any interruption. Apart from this, these images help you understand the designs in a better way.

4) 3D Boat Design Software

As we have mentioned above that you get up to 518 different designs that are reliable for all kinds of boat building procedures. But if you have your imaginative boat design and you want to pour life into it then this boat building plan can be your top pick. Because this program comes with CAD software that can turn your imagination into reality. You can make your custom boat by using this handy software.

5) Boat Building Secrets

This e-book discusses  boat building tips , tricks, and ideas for beginners and experienced craftsmen. It answers hundreds of questions covering fundamental and practical details of building boats. Various construction techniques of experienced boat builders have been explained in a step by step easy to implement manner.

6) Boat Safety and Regulations

This book is a must-read as it covers applicable regulations that boat builders must comply with. It covers different regulations based on  boat type , engine, usage, and length.  Compliance guidelines  for fuel systems, electrical systems, loading, capacity, ventilation, and information flotation requirement have been discussed thoroughly.

Boat Building Plans Price - Is it Worth Your Money?

After learning about the features and legitimacy of Boat Building Plans, you must be wondering whether this package is within your reach or not?

So we have good news because you will be pleased to hear that this whole package with 518 boat designs and 40 video tutorials comes at a very affordable price of $47 only.

In addition to this, you will get 5 free bonuses worth $252.85. And still, if this doesn’t work for you then you can get your money back with 60-days money back guarantee !

This boat building plan by Martin Reid is not a child’s play but a real deal for turning your imagination into a real invention. If you buying access right now, you can get free bonuses along with all the elements that we have mentioned in the package. So why not give it a try and turn your dreams into reality by building a picture-perfect boat?

Boat Building Plans Reviews

Here are just a few  testimonials out of thousands of satisfied customers of Boat Building Plans. Visit Boat Building Plans Pricing , to purchase the boat building blueprint bundle.  For any queries, find the  frequently asked questions  here .  We feel blessed when we hear about such outstanding results. Help us improve by sharing your feedback good or bad after the purchase.

• Accessories
• Built Boats
• Information
• Rowing Boats
• Sailing Boats
• Motor Boats
• Surf and Paddle Boards

Sailing Boat Plans

Madness Pacific Proa

A lightweight Pacific proa for fast cruising or daysailing.

More information

Tenderly Dinghy

A traditional-looking 10-foot clinker dinghy for rowing, sailing and motoring that is stable, handsome and easy to build.

Eastport Pram

A pretty, light, tough, roomy and easy to build 7 foot 9 inch pram dinghy that can be rowed or sailed.

Nesting Eastport Pram

An easy to build rowing and sailing pram dinghy that splits into two nesting sections for compact storage.

A 15 foot clinker style double ended family boat that can be rowed, sailed or motored.

Skerry Raid

A small, decked, wooden cruising boat for coastal expeditions by sail and oars.

Lighthouse Tender

A stable but fast double-ended rowing or sailing boat based on a traditional Maine Peapod.

Northeaster Dory

A 17 foot clinker dory for solo or tandem rowing or sailing.

Southwester Dory

A lightweight beach cruising and expedition boat for sailing, rowing and motoring, which can also be built as a motor launch without the sailing rig.

The Duo is a simple-to-build rowing and sailing dinghy that can nest for easy storage. It makes a good tender as well as a fun sailing dinghy.

Jimmy Skiff II

A stable, flat-bottomed rowing and sailing boat that also handles well under motor, for family outings, fishing and day sailing.

Goat Island Skiff

A simple lightweight sailing boat with excellent performance.

PassageMaker

An 11 foot 7 inch clinker style pram dinghy that performs beautifully when rowed, sailed or motored.

PassageMaker Take-Apart

An 11 foot 7 inch clinker style pram dinghy that can be nested to save space.

Pixie Beach Catamaran

The Pixie is a fun car-toppable beach catamaran that sails well with one or two crew and is popular among people who are new to sailing catamarans but who are not that interested in racing.

A fast-sailing 15 foot cabin cruiser with a dry and commodious interior.

Autumn Leaves Canoe Yawl

A modern wooden canoe yawl for engineless coastal cruising by sail and oars, designed to be affordably built by an amateur.

Faering Cruiser

A serious rowing and sailing boat for coastal cruising, with a small cabin aft.

Nesting Expedition Dinghy

A very compact sailing beach cruiser that can be nested in three sections for storage in a corner of a garage.

Mbuli Pacific Proa

Plans for a very light and fast Pacific proa beach cruiser.

A versatile nesting dinghy for day sailing and camp cruising with a comfortable double berth.

Outrigger Junior

A finely-proportioned and lively sailing canoe with a huge lateen sail for lots of speed.

Quattro 14 Beach Catamaran

A lightweight single-trapeze beach catamaran for racing that is easy to build.

Quattro 16 Beach Catamaran

A high performance twin-trapeze racing catamaran that is lightweight and easy to build.

Strike 15 Trimaran

The Strike 15 is a high-performance racing trimaran with folding outriggers designed to be easy to sail by older or less experienced sailors and easy to launch from the beach.

Strike 16 Trimaran

The Strike 16 is a dry, comfortable trimaran for four-person day-sailing or two-person weekending.

Strike 18 Trimaran

The Strike 18 is a dry, comfortable trimaran for family day-sailing with an optional, removable, cabin top to convert it into a pocket cruiser.

Tryst Trimaran

A light and stable 10 ft trimaran that is very easy and fun to sail and can nest for compact storage.

Zest Racing Dinghy

The Zest is a single-handed racing dinghy with a plywood hull and comfortable sitting-out wings.

Beth Sailing Canoe

A light sailing canoe combining a traditional rig with a high speed hull.

Kombi Sailing Canoe

A truly dual-purpose wooden canoe for exciting sailing and family paddling.

Viola Sailing Canoe

A lightweight plywood sailing canoe with the performance and stability of a good sailing dinghy.

A low-cost sailing dinghy that is easy to build and fun to sail for clubs, regattas and sailing lessons.

A pretty little demountable trimaran designed for speed and easy handling by one or two people on lakes, rivers and bays.

TriRAID 560s

A light and fast adventure trimaran for 1-2 people designed for raid competitions.

Sailing Outriggers

Outrigger floats to turn a canoe or kayak into a fast sailing trimaran.

Drop-in Outrigger Plans

Light and easily removable outrigger floats that turn a canoe or kayak into a formidable sailing boat or a stable fishing platform.

Mini Drop-in Outrigger Plans

Small outriggers for a sailing canoe, to aid stability for learners and for extra safety for more adventurous sailing.

Drop-in Canoe Sailing Rig Plans

A simple lug rig that can be added to an ordinary canoe or kayak to add the ability to sail.

• Fyne Boat Kits — Old Cooperage Yard, Gatebeck, Kendal, Cumbria LA8 0HW
• Telephone: +44 (0)1539 567 148
• Email: info [at] fyneboatkits.co.uk

Copyright © Fyne Boat Kits

Racing Sparrow Plans

Check out these plans and resources, ranging from a 375mm boat to a 1500mm yacht. Pair these with our eBook guide for a fast, easy, and affordable home build RC yacht.

RS-RG65 - 650mm plans, measures to international RG65 rules

A full forward hull and a straight stern. This boat has proven to be a very fast and competitive racer.

Free Book Sample - PDF

A few pages from the eBook absolutely free

Racing Sparrow 750 plans

The plans that come with the eBook.

Racing Sparrow 1000 plans

A one metre version, scaled up lines. Bulkhead only plans. Look at the 750 for full schematics.

Racing Sparrow 1500 plans - A scaled up Racing Sparrow

A larger size model yacht. I haven't seen many of these surface. It's a good challenge to build.

Racing Sparrow 375 plans - The smallest sparrow

A miniature RacingSparrow. A great introduction to building with balsa.

RacingSparrow Footy plans

A double diagonal design footy from RacingSparrow.

Logos & Sticker Sheet

Downloadable logos and an EPS file to be sent to a printer and printed out on navy blue cutout vinyl.

Common questions about the plans

What tools do i need to build a racingsparrow.

1. Chisel 2. Craft-knife 3. Drill Bit - 2mm (5/64in)bit 4. Drill Bit - 5mm (3/16in) bit 5. Electric Drill 6. Felt Marker 7. File 8. Hacksaw 9. Hammer 10. Hole Punch 11. Lighter 12. Pen 13. Pencil 14. Pins 15. Pliers 16. Ruler (steel) 17. Sanding Block 18. Scissors 19. Screwdriver 20. Spirit Level (optional) 21. Sponge Brush (several) 22. Vice Grips

Do I need the eBook to build this cool rc sailboat?

No you don't. The book is designed for the newcomer to model yacht building. The book does make it a much simpler process with every detail figured out and covered in the book. Seasoned builders can simply have a go with the free plans.

Are the plans really free?

Yes all the plans are free to download and use as you see fit. The most comprehensive plans are the RS750 A1 full size.

Are there CAD files or 3D files?

Yes there is a 3D dxf file inside a zip file that you can download for free and use how you want. Some people use this in CAD programs or in 3D modelling programmes to great effect. Look under Racing Sparrow 750 plans on this page. An STL file for 3D printing is in the pipelines. Email me if you want a copy.

While we think 3D printing is great, we believe old-skool strip planking balsa is a wonderfully simple way to make a very lightweight boat with excellent longitudinal strength and beauty.

Builders eBook

Dive into the world of boat building with our eBook. Discover the craft of hull planking, fibreglass strengthening, and lead keel ballast casting.

Master the art of electrics installation, spray painting, sail making, and tuning of sails. Download a sample today and embark on a rewarding journey of boat construction.

What the builders and sailors say:

Being a complete novice, I purchased your book a couple of years ago and built two racing sparrows. Building on this experience I then went on to build, from scratch, an IOM (Triple Crown design). I've since joined a local club and sail virtually every weekend. I would just like to thank you for your endeavours which have allowed me to enter a world I never thought was in my reach.

John Sterland, Australia

Coming upon your book, "Build your own Radio Controlled Yacht" in the Napier Public Library, I am hugely impressed. The combination of your superb photos and illustrations with your easy writing style make it a standout publication and I hope it does well for you.

Richard Spence, New Zealand

Thanks for an excellent design in your RG65. I trialled her again today in a solid 20 knots gusting higher. Even so in a steep chop and fingers off the rudder she drove upwind remarkably well, balanced perfectly. Very impressed that a model boat can handle that with a large rig. I found the book excellent. Ive built several big boats, plus a few skiffs and without that resource building such a good boat would have been impossible.

Mike Bennett

Look at all these cool boats folk have made at home

There is also a full gallery with a boat load of photos of Racing Sparrow's

Bradley , Kaiapoi

Dec 29, 2007

Julian Anthony , Kohuwala, Sri Lanka

Jun 4, 2021

Jonathon Gillham , New Zealand

Oct 11, 2018

A reconditioned RS750 by the designer Bryn , New Zealand

Aug 3, 2009

John Sterland , Australia

Dec 28, 2011

Racing Sparrow #3 - rigging , Auckland, New Zealand

Apr 1, 2004

Matt - Fly Girl 750

Oct 1, 2014

John Sheehan's 750 - stunner!

Oct 28, 2009

Royal Declerk's - RG65(Foxy Lady) Sisters: 650 & 750 , Mount Martha, Victoria, Australia

May 2, 2018

Royal Declerks' Black Pearl , Australia

Apr 2, 2017

Hi Bryn, let me introduce you to “Jack Sparrows” sister, Black Pearl, yet to have sail markings done and some rig adjustments.  Regards Royal.

US to build temporary port to deliver Gaza aid

Sea deliveries to gaza.

Get weekly news and analysis on the U.S. elections and how it matters to the world with the newsletter On the Campaign Trail. Sign up here.

Reporting by Steve Holland, Jonathan Landay, Katharine Jackson; Additional reporting by Matt Spetalnick, Michelle Nichols and Patricia Zengerle; Editing by Daniel Wallis and Clarence Fernandez

Our Standards: The Thomson Reuters Trust Principles. , opens new tab

Mums ban outdoor fun as air pollution worsens in Vietnam capital

Nga Trang has nearly stopped going out in the evening and forbids her kids to play outdoors after school because air pollution from burning trash gets worse in her neighbourhood in Hanoi in the late afternoon.

New Cape Coral Yacht Club designs: Most on council like a coastal, Key West vibe

Given three different design options for the new Yacht Club Community Center , most of the Cape Coral City Council is leaning toward a coastal, Key West-flavor architecture.

At a committee of the whole meeting on Wednesday, the city sought direction from the council on a design direction for the outside of the community building.

"It's a concept, just like we do with anything else, and as we are designing, things may come up that we want to shift and be nimble (on)," said Cape Coral City Manager Michael Ilczyszyn.

James Pankonin with Kimley Horn, a consulting firm focusing on public and private developments, presented the information about the look of the community building.

Cape Coral's Yacht Club Community Park, which includes a yacht basin, tennis courts, a swimming pool, a ballroom, and a beach, has been a popular attraction and staple for the city since the 1960s but is set to undergo major renovations after Hurricane Ian delayed the original plans .

The current plans include a new two-story community center to replace the ballroom, removing the tennis courts, rearranging the area to accommodate a four-story parking garage, a new restaurant, and a new resort-style pool.

The city is also preparing for the demolition of the Yacht Club and its facilities in April as it awaits permits.

No estimates could be provided for the price of the new building.

"It will really come into how much of certain materials are needed and construction methods," Ilczyszyn said.

The city will have that information once they have 30% of the construction design.

Two public meetings for the designs are planned for April 2 and May 7.

After getting public input, the city will vote to amend its contract with Kimley Horn to approve all these changes.

The plan is to have these changes approved or introduced before the summer hiatus.

Previous Coverage Demolition of Cape Coral's Yacht Club slated for April will cost almost $1 million

Cape Coral community news Courtyards of Cape Coral South sets bingo fundraiser for residents still affected by Ian

New Designs for the Yacht Club building

John Bryant with Sweet Sparkman Architecture and Interiors, a Sarasota-based design firm, said the goal with the new designs was to maintain the experience of the original Yacht Club.

The majority of the council preferred option one.

Design one:

Bryant described the first option as "coastal vernacular" and similar to the park buildings at Lake Kennedy and Yellow Fever Creek.

"So it's sort of informed by the current architectural work in 2024," Bryant said. "Kinda Key West."

Councilmember Dan Sheppard and Mayor John Gunter preferred option one.

Gunter said the design was the most pleasing for him.

Councilmember Keith Long liked option one and said he liked the Key West aesthetic.

Councilmember Tom Hayden liked option one.

Design two:

Option two is more informed by the current Yacht Club and would have a stone base and mid-century feel to it, according to Bryant.

"There's certainly opportunity to kind of further develop this option to have even more of the existing Yacht Club feel, but a different vibe, feel than option one," Bryant said.

He also said option two might be more expressive the closer they try to recreate the aesthetic of the old ballroom building.

Councilmember Jessica Cosden liked design two as it incorporated design elements of the old building though she lamented how similar it looked to the first design.

"I wish we could have done more, but I know it's hard with a two-story building, to make it look the same as a very unique one-story building.

Councilmember Bill Steinke said two would be his choice as well, but was wary of additional maintenance of natural wood products used in the design.

"As long as we can bring that aesthetic and keep the maintenance down, number two would be my choice," Steinke said.

Councilmember Robert Welsh said he could go either way, but he liked the look of two.

Design three:

This would be more contemporary and modern.

"Even with a more contemporary language, you can still have warmth, incorporating some wood elements and stone elements," Bryant said.

None of the council members expressed any favorability for the third design.

Inside the new community center

The Community Center will have an additional 10,000 square feet for a total of 47,000 square feet, a history room to remember the first ballroom building on the first floor, and more rooms for civic and community use on the first floor.

Additionally, the new ballroom has shifted slightly as the balcony area on the second floor has been expanded to wrap around the top of the building.

Couple selling ice cream boat business: ‘Life has other plans’

by: Madalyn Buursma

Posted: Mar 19, 2024 / 01:47 PM EDT

Updated: Mar 19, 2024 / 01:47 PM EDT

Editor’s note: The above video is from a July 2023 article profiling the business.

GRAND RAPIDS, Mich. (WOOD) — A couple that opened an ice cream boat last season is looking for someone to take over the business.

Megan Ward and her husband, Isaiah Kinney, started Ice Cream Afloat last May. They visited various West Michigan lakes to sell ice cream, posting their location each day on Facebook. The couple played classic ice cream truck music and sold prepackaged items like ice cream sandwiches and popsicles.

Last summer , the pair told News 8 people were enthusiastic about the ice cream boat.

“I just love how happy everyone has been seeing us. That’s the best part, seeing how happy everyone is to see us and bringing a unique experience to people,” Ward previously said.

The couple opened Ice Cream Afloat shortly after moving to Michigan from West Virginia. Now, they’re moving again, they shared in a March 10 Facebook post.

“It saddens us to write this, but life has other plans for us,” the wrote in the post. “We will be relocating, and we will not be taking our business with us. It is our hope that someone will take over and continue our mission to serve ice cream and happiness to the boaters of Michigan.”

In a second post , they shared they “are overwhelmed by the amount of responses we have received.”

Those interested in the business can send them a Facebook message, or reach out by email at [email protected] .

Get a head start on spring decorating with this modern …

These modern, elegant and lively items for all around the home will help herald in spring.

Starbucks free drinks are back so you can try the …

Starbucks is bringing back its popular buy-one, get-one deal for Rewards members, and the deal applies to the new spring menu.

Spring 2024 fashion trends to wear this season

Spring 2024 style is an eclectic mix of contemporary casuals, retro-inspired accessories and revived silhouettes.

Thanks for signing up!

Watch for us in your inbox.

Subscribe Now

Breaking News Alerts

Top stories on woodtv.com, 500-pound mound of pythons found in florida marsh, good results from first tests; boil advisory remains, msp: trooper shoots and kills man in coldwater, couple selling ice cream boat business, woman sues bc police after wrongful conviction.

Submit photos, videos and news tips here.

News 8 Links

• Download the WOOD TV8 News app
• Meet The Team
• To The Point
• Stream News 8 newscasts
• Gas Prices for Grand Rapids & Kent Co.

Download the free WOOD TV8 News app

Bestreviews.com - top picks to make everyone happy, there’s still time to snag a cute easter outfit for …, amazon’s big spring sale: best deals under $100, amazon just announced the ‘big spring sale’ – the …, these easter games for families are sure to keep …, gifts and goodies every kid will want in their easter …, 22 easter decoration ideas for your home, yard and ….

Politics latest: Chancellor appears to let slip when election could be

Chancellor Jeremy Hunt has nodded to when the election could finally be held. It comes after a former minister warned Tory plotters against ousting Rishi Sunak before the vote, as his mooted replacement - Penny Mordaunt - gave short shrift to suggestions she could become prime minister.

Tuesday 19 March 2024 18:47, UK

Please use Chrome browser for a more accessible video player

• Coming up on Politics Hub at 7pm
• Chancellor hints at October election  | The dates PM could pick
• Drakeford gives emotional resignation statement
• Mooted Sunak rival responds to leadership rumours
• Ed Conway: Why Labour's struggling to set itself apart on economy
• Follow Politics Hub With Sophy Ridge on WhatsApp
• Listen to Politics At Jack And Sam's  wherever you get your podcasts
• Live reporting by Tim Baker and (earlier)  Faith Ridler

Earlier this afternoon, Jeremy Hunt suggested to a House of Lords committee the general election could be in October ( see 15.24 post ).

Referring to the need for a government spending review by April 2025, the chancellor said: "And of course, if the general election is in October, that will mean it's very, very tight."

Cabinet ministers have been reluctant to get quite so specific until now, only offering the "working assumption" that it'll be in the autumn, while Rishi Sunak has ruled out holding it with the local elections on 2 May.

"This is the game all MPs are playing at the moment," says our chief political correspondent Jon Craig . 

"Guess the date of the general election."

Is Mr Hunt "playing a little game with us", Jon asks, "or has he let slip the preferred date of a general election?"

If so, what dates in October could the government pick?

By convention, general elections happen on a Thursday.

Running through those dates, Jon says: "Not going to have it on October the 31st - that's a Thursday, but Halloween!

"Can you imagine an election on that date? No, forget that."

The headlines could write themselves, it's fair to say.

Jon continues: "The 24th, the previous Thursday - well, there is the Commonwealth heads of government conference.

"That's in Samoa from the 21st to the 25th.

"King Charles would be attending, and whoever is prime minister, whether Mr Sunak or Sir Keir Starmer, they would be attending as well."

That rules that one out too, then.

If it's October, Jon reckons the 17th is the preferred date.

"Mr Hunt, talking about how timetables are tight and so on - it probably would not be an any earlier than that," he says.

However, it should be noted it's technically possible for an election to be held on 10 October, if the PM calls an election right after MPs return from summer recess at the start of September. 

Jon notes poor local election results in May could see Tories move against the PM even sooner, which may force an election earlier, but the government is "obviously" working towards the second half of the year.

Shadow chancellor Rachel Reeves is giving the annual Mais Lecture at the Bayes Business School.

See below for the key points of her speech. We'll be updating the post as the speech goes on:

• The UK is in a moment of "flux" in the economy like the 1970s, and supply side reform is also needed;
• She proposes three key ways forward - guaranteeing stability, streamlining investment, and reform;
• Unlike in the past, the UK is not falling behind because others are growing, but because the UK is diverging from other Western European growth;
• The collapse in productivity growth is the reason behind the collapse of real-time wage growth;
• A new economic model is needed, moving away from ideas focussing on a narrow base of growth;

Shadow chancellor Rachel Reeves is outlining what a Labour government would do to generate growth, as she delivers the annual Mais Lecture at the Bayes Business School.

Watch live in the stream below - and we'll have a separate post shortly on all the main points from her speech.

Never mind election speculation, the really big rumour of the day has been who might be the next James Bond.

Reports suggest it's going to be Aaron Taylor-Johnson, the British star who's appeared in films like Tenet, Kick-Ass, Godzilla, and Avengers.

Never mind what casting directors make of him, what about Number 10?

After all, Bond's bosses need a solid relationship with the PM…

"It's an iconic role, and I'm sure he'll do a good job," Rishi Sunak's spokesman said today.

Just make sure you stick to the plan, 007.

One year ago, Rishi Sunak made five pledges for voters to judge him on.

The prime minister met his pledge to halve inflation by the end of 2023, leaving four pledges outstanding.

However, he is faring less well with his other pledges.

It has been confirmed the UK is now in recession, which means the PM's pledge to grow the economy is not being met.

With the general election approaching, how is Mr Sunak doing on delivering his other promises?

You can see the progress for yourself below.

We've been reporting this afternoon on the chancellor's appearance at a House of Lords committee, where he appeared to suggest the general election will happen in October.

Ministers have been coy on specifics until now, only going as far to say that autumn is likely.

Since Jeremy Hunt's comment earlier, we've been narrowing down the potential dates we could finally go to the polls (see pinned post).

You can watch the moment he seemed to let the likely month slip below:

The Sky News live poll tracker - collated and updated by our Data and Forensics team - aggregates various surveys to indicate how voters feel about different political parties.

Labour is still sitting comfortably on a roughly 21-point lead, averaging at 44.1% in the polls, with the Tories on 23.1%.

In third is Reform UK on 11.3%, followed by the Lib Dems on 9.8%.

The Green Party stands at 5.8%, and the SNP on 2.9%.

See the latest update below - and you can read more about the methodology behind the tracker  here .

Shadow chancellor Rachel Reeves is set to give a speech on the economy this evening, but already some from the left are criticising her.

Sharon Graham, the general secretary of the Unite union, says "it's time Labour came up with a plan for the real economy rather than the big business lobby".

According to Sky's Westminster Accounts tool , Unite has given close to £11m to Labour since 2019.

Ms Reeves will be speaking in an hour or so.

Ms Graham adds: "Labour needs to be focused on delivering good jobs, public services and dignity in retirement, not more rhetoric about abstract economic concepts, like GDP growth.

"If you stick to phoney fiscal rules, rule out taxing the wealthy and pander to the profiteers, you end up in a straightjacket of your own making.

"Ripping up building regulations and tinkering in the public sector are not going to deliver serious growth – that's for the birds. Only sustained long term public investment in our crumbling infrastructure can turn the tide on decline."

Our  economics and data editor Ed Conway spoke to Ms Reeves earlier, and his takeaway was that she doesn't sound dissimilar to the economic pitch being made by Rishi Sunak and the Tories.

Read what she had to say below…

As well as hinting at a general election date, Chancellor Jeremy Hunt used his appearance at the House of Lords Economics Affairs Committee to talk about defence spending.

During the budget two weeks ago, Mr Hunt would not say when defence outlay would return to the 2.5% target - and has since faced calls from Defence Secretary Grant Shapps to raise spending to 3%.

Mr Hunt tells the Lords that defence spending will need to rise - saying the "world around us" is becoming more dangerous.

He will not commit to the 3% figure, nor will he give a timescale.

The chancellor adds there is "absolutely no doubt" spending needs to go up - but procurement needs to be looked at to make sure projects serve the purpose needed.

He also notes that circumstances are changing, such as the war in Ukraine raging on - and potentially lasting much longer.

Mr Hunt makes an interesting comment there could be "further change" in the situation there with the US presidential election later this year.

Donald Trump has repeatedly said he wants to cut funding to Ukraine and end the war.

A little earlier, we brought you live coverage of Mark Drakeford's final Welsh parliament address as first minister ( see 15.52 post ).

He'll be formally handing in his resignation to the King later.

So, how will he be remembered after five years in office?

Our West of England and Wales correspondent Dan Whitehead   says the pandemic will be "absolutely central" to how many people across the country remember him.

He says the 20mph default speed limit he introduced will also be something many people remember "as his legacy".

It's been "so controversial" for much of the population, Dan says, with a petition calling for it to be overturned.

Mr Drakeford has stood by the scheme, insisting people will eventually understand it's the right way forward.

In his resignation speech earlier, he said his "radical, reforming government" has been committed to doing "the things that are difficult today" to benefit future generations.

For a fuller look back on his career, read this from our chief political correspondent Jon Craig :

Be the first to get Breaking News

Install the Sky News app for free