sailboat mast partners

The Unlikely Boat Builder

The continuing voyages of Petronella and her crew.

15 May 2012

Mast partner, 5 comments:.

Looks good to me John. Hope the weather clears soon.

If you need to remove epoxied in steel apply heat. The epoxy will soften at a temperature around 70ºC & then you can unscrew the thread. In this case I'd have put up a temporary shield over the timber & used a small gas torch on the exposed rod end. Don

H'mmm. Now that's a good trick to remember. Thanks!

I like the repair.

Nice job. I was gonna say what Anon said about heating those epoxied-in rods with a torch .. but he already said that.

I'd love to hear from you. Please comment!

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sailing Totem
• Charter Resources
• Destinations
• Galley Recipes
• Living Aboard
• Sails and Rigging
• Maintenance
• Best Marine Electronics & Technology

How to Inspect and Tune a Sailboat Rig

• By Ralph Naranjo
• Updated: May 14, 2020

Major mast failures usually begin as minor hardware problems. At least that’s what scrap-bin forensics seems to confirm. So, instead of dreading a dismasting, prevent it with a sensible approach to rig maintenance.

Some sailors inspect their masts and rigging with the spar stepped, but most recognize how much will remain unseen. Riggers recommend that the mast come out every few years and be placed on a pair of sturdy sawhorses ready for close-up scrutiny. My DIY approach focuses on hardware junctions and points where load paths intersect. Packed in my rigger’s bag are the usual hand tools, plus a Scotch pad, a quality magnifying glass and a small digital camera to record the findings. The old rule of thumb is that standing rigging has a decade’s, or one circumnavigation’s, worth of reliability; it’s a benchmark that remains valid today.

Another important issue is the rigging’s designed safety factor, or how much stronger the components are than they need be. The catch here is material deterioration over time, and the fact that there’s a direct correlation between stronger structures and increased reliability. For example, by increasing 1-by-19 shrouds and their attendant hardware from 5/16 inch to 3/8 inch, the higher safe working load translates into a longer life span. It’s a legit assumption, but doing so is both costlier and adds weight aloft, which can rob performance. The same tenets apply for a larger-diameter spar section and greater wall thickness. Engineers and naval architects try to balance these competing factors.

Some decades ago, I watched the deck-stepped spar of my first little cruising sloop drop into the drink. It drove home the fact that it really is the little things that count. In that case, it was a stainless- steel toggle, connected to an upper shroud turnbuckle, which had endured a few too many on-off load cycles. A tiny, nearly invisible crack had opened up, and salt spray had found a new home. The resulting corrosion tipped the scale and led to a dramatic failure. Since then, rig scrutiny has become my obsession.

The old rule of thumb is that standing rigging has a decade’s, or one circumnavigation’s, worth of reliability.

Wire and rod end fittings need a close look, especially in areas where there are brown stains and signs of cracks, pitting or other surface deterioration. This includes an evaluation of clevis-pin holes that should be circular, not elongated. Confer the same level of scrutiny to the clevis pins themselves. Don’t confuse stainless-steel clevis pins with chrome-plated bronze pins. The latter are just fine when used in bronze fittings, but when a bronze clevis pin is placed in a stainless-steel chainplate hole, the bronze pin can be carved away by the much harder stainless-steel chainplate.

My inspection process includes a rigging-wire wipe-down with a rag that easily snags on tiny cracks. It includes careful scrutiny of hardware junctions. I search for signs of chafe, especially where fiber or wire running rigging makes directional changes at sheave boxes, and around where the headsail furler’s top swivel rides. Looking closely at masthead exit points, I check for sheave wobble, excess side play and signs of pulley damage.

This is also the time to sort out halyards that are rubbing against external or internal obstructions. I use a bright, narrow-beam LED flashlight for a good visual inspection of the internal portion of the mast. Not only will it pinpoint screws and sheave boxes that might be causing chafe, but it also will help you untangle crossed halyards and confirm fairleads. While working at the heel end of the spar, look closely for corrosion and a condition riggers call “elephant foot.” It’s an actual wrinkling of the alloy tube section caused by too much compression and a too-thin wall section. It’s most often seen on raceboats with powerful hydraulic mast-adjusting systems, and on cruising boats that have pounded into too many steep wave faces.

Roller furling foils hide the wire or rod on which they spin. Rigging end fittings and terminals can usually be inspected, but a broken strand of wire inside the foil might initially go unnoticed, at least for a little while. This is another reason why offshore cruisers opt for a cutter or solent rig that adds a second stay for some extra ­insurance. Following the once-a-­decade rule, it makes sense to completely disassemble furling systems, and replace the wire along with any worn bearings, bushings or plastic spacers.

My inspection process includes a wire wipe-down with a rag that easily snags on tiny cracks. I search for signs of chafe everywhere.

Keep in mind that when the mast is unstepped, many roller furling drums and head foils (especially on boats with deck-stepped rigs) extend beyond the heel of the spar. If the yard doesn’t splint and immobilize the extended foil and drum, do it yourself. All it entails is a couple of 2-by-4’s, or a pair of old oars lashed or duct-taped to the mast just above the heel. This double splint should extend to the base of the roller-furling drum where it too is lashed or taped. It keeps the drum from dangling and bending the foil during transport, and while the rig is stored on a mast rack.

Spreaders also deserve a really close look. All too often, excess anti-chafe protection results in the spreader tips becoming a water trap that turns into a hidden corrosion bath. So, when the rig is down, cut away the spreader-tip padding, and use white vinegar and a plastic scrub pad to get rid of any white powdery oxidation. Remove the spreaders from the spar, and inspect the area where spreader bases make contact with the mast. Look for compression damage to the mast wall and signs of corrosion damage. If all is well, reassemble using one of the tried-and-proven water-resistant lubricants. I’ve settled on Lanocote, McLube Sailkote and Super Lube, using Boeshield T-9 and WD-40 as my go-to spray protectant and penetrant. Throw away the old cotter pins, and use new pins on all of the reassembled rigging.

“She’ll be right, mate,” was the favorite phrase of an old Kiwi friend, but it isn’t good advice when it comes to keeping the rig where it belongs. Don’t shy away from calling in a qualified rigger to handle larger problems.

Most boatyards will restep spars but won’t tune the rig. Their goal is to set up the mast and rigging to approximate how it arrived. Occasionally, they hit the mark and even replace the mast wedges appropriately. Otherwise, I wait for a flat calm to make sure that the boat has no list. This involves using a tape measure to confirm the athwartship trim (waterline to rail-height port equals waterline to rail-height starboard). Then I check the perpendicular and rake of the mast using the main halyard with a makeshift plumb bob (dive weight) attached. The retune requires loosening the turnbuckles and incrementally retensioning the rigging. Small amounts of headstay and backstay adjustment relocates the masthead, causing the makeshift plumb bob to move significantly. I use prior measurements from previous mast-tuning successes to set the rake to a sweet spot that, in the past, delivered a minimal amount of weather helm.

With the rake set, I insert a set of teak or high-density hard-rubber wedges between the mast and the mast partners. These wedge-shaped spacers have a top flange that prevents them from falling into the bilge when the mast compresses on one side of the partners and opens the gap wider on the other. With all the wedges set, I incrementally add tension to the rig, tightening headstay and backstay first, while carefully maintaining the rake angle. Next, I adjust the upper shroud (or V1), working from side to side to keep the mast perpendicular. Finally, I snug up (but not overtension) the lower and intermediate shrouds. This static tuning sets the stage for an underway final tune, during which I check how well the spar remains in column. Leeward bends and S-curves are problematic and must be minimized. Boats with discontinuous rigging have shrouds that are not one continuous wire run. They utilize turnbuckles located above spreaders that must be individually adjusted to eliminate side bend.

During sea trials, make sure the leeward standing rigging is not overly slack and flopping around like loose spaghetti.

Intentional fore and aft mast bending can influence sail shape, and is put to good use aboard raceboats. Adding such complication to most cruising boats, which are ­normally steered by an autopilot, makes less sense. In-mast furling spars are least happy with powerful hydraulic backstays bowing the mast. So, get sound advice from a rigger/mast builder before adding hydraulic sail-shaping gear.

A sea trial should follow your static mast tune. And as you beat to windward in a modest 10- to 15-knot true breeze, check the leeward standing rigging. Make sure it’s not overly slack and flopping around like loose spaghetti. If so, add more shroud tension to both sides. A tension-testing gauge will work, but many sailors do fine estimating by hand. Cruising-boat rigs shouldn’t have the same amount of rig tension as a raceboat ­beating to windward. However, if your sailboat’s mast is deck-stepped, make sure the coachroof isn’t deforming due to the compression load. A compression post, ring frame or other rigid structure should be spreading such loads. If you’re unsure of the correct rig tune, arrange a session with a rigger or sailmaker—and start the season in optimized trim.

Technical expert Ralph Naranjo has inspected the rig on his Ericson 41, Wind Shadow , on countless occasions.

• More: fitting out , hardware , How To , mast , rigging
• More How To

How to Rig Everything in Your Favor

Is There a Doctor Aboard?

3 Clutch Sails For Peak Performance

It’s Time to Rethink Your Ditch Kit

Cruising the Northwest Passage

Balance 442 “Lasai” Set to Debut

A Legendary Sail

10 Best Sailing Movies of All Time

• Digital Edition
• Customer Service
• Privacy Policy
• Email Newsletters
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

Mast Stepped: A Comprehensive Guide to Properly Installing and Maintaining Your Sailboat’s Mast

by Emma Sullivan | Jul 17, 2023 | Sailboat Gear and Equipment

Short answer mast stepped: Mast stepped refers to the position where a sailing boat’s mast is supported and secured on deck. It commonly involves attaching the base of the mast to a step or partners, ensuring proper rigidity and stability for sailing operations.

What does it mean for a mast to be stepped on a sailboat?

Blog Title: Navigating the Seas: Demystifying Mast Stepping on a Sailboat

Introduction: Sailing is often associated with a sense of freedom and adventure, as you glide through the serene waters powered only by the wind. However, behind every majestic sailboat lies a complex set of components working in synchrony. One such crucial element is the mast, which plays an integral role in allowing your vessel to conquer the seas. In this blog post, we will delve into what it truly means for a mast to be stepped on a sailboat and explore its significance in sailing.

What is Mast Stepping? When we refer to “stepping” the mast on a sailboat, we are essentially describing the process of erecting or installing it onto the boat’s deck. Picture this: just like erecting a tent requires setting up poles, attaching beams, and securing them firmly in place – stepping the mast follows similar principles but with much more complexity.

The Role of Mast: To comprehend why this process holds vital importance for sailors, understanding the role of a mast itself is paramount. The mast serves as an essential vertical spar that supports and secures all standing rigging – encompassing shrouds and stays – which ensures that your sails remain taut amidst ever-changing weather conditions. Additionally, it houses various components necessary for smooth navigation, including halyards (ropes used to raise and lower sails), sheaves (pulleys facilitating rope movement), and even instrumentation like wind sensors or radar systems.

Now that we have established why masts are pivotal in sailing, let’s explore the different types of masts commonly found on sailboats:

1. Keel-Stepped Mast: In modern sailboats, keel-stepped masts are prevalent. These masts rest securely in support at their base within or directly on top of the keel (the large fin-like structure underwater). This design enhances structural integrity and stability while also allowing for easy maintenance.

2. Deck-Stepped Mast: Alternatively, some sailboats feature deck-stepped masts. These masts are secured on the boat’s deck itself, with a lower support or compression post transmitting the mast’s loads to the keel. Deck-stepped masts offer advantages like simplified installation and removal, making them particularly favorable for smaller boats or those frequently transported by trailer.

The Process of Stepping the Mast: Now that you grasp the significance of the mast and understand its types let’s explore how this intricate process is executed:

1. Preparation: Before embarking on mast stepping, it is crucial to ensure that all necessary rigging hardware, lines, hoisting equipment (such as a crane or gin pole), and safety gear are readily available. Thoroughly inspecting all components for wear and tear is equally important to avoid any mishaps during installation.

2. Alignment & Integrity Check: Next comes aligning the mast properly at its designated step point on the boat’s deck or within/upon the keel structure (depending on mast type). Checking for proper alignment prevents undue stress on both the boat and mast while ensuring efficient sailing performance.

3. Hoisting & Securing: With preparation complete and alignment precise, it’s time to gently hoist the mast using an appropriate force measurement technique to prevent overloading any connection points or causing damage. Adequately securing the mast at its step point is paramount – utilizing sturdy stainless steel bolts, shackles, or other suitable fixtures ensures a robust connection.

4. Rigging Installation: Once your mast stands tall and firm, it’s time to attach various standing rigging elements such as shrouds, stays, halyards – each with their specific task in supporting sail control systems aboard your vessel. This requires careful attention to detail – adjusting tensions correctly according to manufacturer guidelines guarantees optimal sail performance across different wind conditions.

Conclusion: Stepping the mast on a sailboat is a critical procedure that sets the foundation for successful and safe sailing adventures. A well-adjusted mast brings stability, facilitates efficient control, and allows your sails to harness the power of the wind, propelling you towards new horizons. So, next time you embark on an aquatic journey, appreciate the skill and craftsmanship behind this process – knowing that every smooth glide owes its gratitude to a perfectly stepped mast.

How is a mast stepped on a sailboat? A step-by-step guide.

Stepping the mast on a sailboat is a fundamental process that marks the beginning of every sailing adventure. It involves raising and securing the mast into its proper position, allowing for the attachment of sails and rigging, ultimately enabling the boat to harness the power of wind and embark on exciting voyages. In this step-by-step guide, we will explore the intricacies of stepping a mast, providing you with all the necessary knowledge to do so successfully.

Step 1: Preparation Before stepping your mast, it is important to ensure that all preceding preparations have been completed. This includes assembling all necessary tools and equipment such as shackles, halyards, or winches. Additionally, inspecting both your boat’s standing rigging and mast itself for any signs of damage or wear is crucial for safety and optimal performance during future sailing endeavors.

Step 2: Clearing obstructions In order to safely step your mast onto your sailboat’s deck, make sure that all potential obstructions are removed. Check for any lines or fittings that may hinder the smooth process of raising the mast. A clutter-free workspace will significantly reduce stress and allow for seamless progress throughout this procedure.

Step 3: Proper positioning You now need to position your sailboat in an ideal location from where you can safely step the mast. Find a spot protected from strong winds or currents that might make this task more challenging. Ideally, choose an area with ample space around you to maneuver freely without risking damage to your vessel or nearby objects.

Step 4: Assemble assistance team Without doubt, stepping a mast is rarely a one-person job. Recruiting assistance from fellow sailors or friends will not only make this process less physically demanding but also contribute to safer execution overall. Ensure everyone involved understands their assigned roles and responsibilities before proceeding further.

Step 5: Attach standing rigging Begin the process of stepping the mast by attaching and adjusting the standing rigging. This includes securing your forestay, backstay, shrouds, and any other supporting cables or wires. Follow manufacturer guidelines and best practices to ensure proper tension and alignment. It is vital to double-check all connections, as loose or improperly attached rigging can compromise the stability and performance of your sailboat.

Step 6: Hoisting the mast Here comes the exciting part – raising the mast! Depending on your boat’s design, this step might require a crane or a simple manual lifting mechanism. Communicate clearly with your team and follow a synchronized approach while hoisting the mast to avoid any accidents or setbacks.

Step 7: Aligning and securing Once your mast is in an upright position, carefully align it with its designated base partner (known as a step) on deck. Any misalignment at this stage can result in unwanted stress on fittings or potentially damage critical components of your sailboat’s rigging system. Use shims if necessary to level out any minor discrepancies.

Step 8: Stabilizing and tightening Now that your mast is properly aligned, securely fasten it using nuts, bolts, or pins provided by its design specifications. Pay close attention to recommended torque values to avoid under- or over-tightening. This step ensures that even under significant wind forces, your mast remains steadfastly anchored.

Step 9: Check for secure fit Before celebrating the successful completion of stepping your sailboat’s mast, conduct a final inspection to ensure everything is secure. Inspect all attachments points thoroughly, checking for signs of movement or looseness. Shake the mast gently from various angles to identify any wobbling that may indicate insufficient tightening.

By following these nine steps meticulously, you will have successfully stepped the mast on your sailboat like a pro! Properly stepping a mast ensures both safety and optimal performance, granting you the freedom to set sail and explore new horizons with confidence. Remember, if you ever feel unsure or uncomfortable during any stage of this process, consult your boat’s manufacturer or seek professional assistance for guidance. Happy sailing!

Mast Stepped: Frequently Asked Questions (FAQ)

At Mast Stepped, we understand that many boat owners have questions about the mast-stepping process. To help alleviate any concerns or confusion, we’ve compiled a list of frequently asked questions (FAQ) below. Read on to discover detailed professional answers to these queries.

1. What is mast stepping, and why is it important? Mast stepping refers to the process of raising a boat’s mast into its designated position. This task is crucial because it enables your boat to properly harness wind power for sailing or cruising. A well-aligned and secured mast ensures better performance and stability on the water.

2. When should I step my mast? Mast stepping is typically done during spring commissioning, when boats are taken out of winter storage and prepared for the upcoming season. However, it can also be necessary if you’re re-rigging your mast or performing maintenance on your rigging system.

3. Can I step my mast by myself? Stepping a mast requires careful planning, preparation, and coordination. While some experienced sailors may be able to do it alone, it’s generally recommended to have at least one other person assisting you. Moreover, enlisting professionals who specialize in mast stepping can provide extra peace of mind and ensure a smooth process.

4. How much does professional mast stepping cost? The cost of professional mast stepping services varies depending on factors such as the size and complexity of your boat’s rigging system, location, and additional services required. It’s best to request quotes from reputable marine service providers who can assess your specific needs accurately.

5. What steps are involved in the mast-stepping process? Mast stepping involves several key steps:

– Preparation: Ensure all rigging lines are securely attached with no tangles or snags. – Support: Use sturdy supports such as a crane or gin pole to temporarily hold your mast in place during the raising process. – Alignment: Carefully align the mast with the boat’s keel, making sure it is perpendicular to the waterline. – Attachment: Securely attach the mast to its base (deck or keel) using appropriate hardware and fasteners. – Rigging: Reconnect all necessary lines, cables, and electrical connections according to your boat’s specific rigging configuration.

6. Are there any safety precautions I should take during mast stepping? Safety is paramount when dealing with a tall structure like a mast. It’s essential to follow best practices such as wearing proper protective gear (e.g., harnesses), using secure lifting equipment, and conducting a thorough inspection of all rigging materials beforehand. Additionally, be cautious of overhead powerlines that may pose a hazard during the mast raising process.

7. How often should I inspect my mast and rigging system? Regular inspections are crucial for detecting any signs of wear, corrosion, or damage that could compromise your boat’s safety while at sea. Ideally, you should visually inspect your rigging system yearly and perform more detailed examinations every three to five years or as recommended by professionals.

8. Can Mast Stepped assist me in selecting the right rigging components? Absolutely! Our team of experts can provide guidance on selecting appropriate rigging components tailored to your boat’s specifications and sailing needs. From wire ropes to turnbuckles and fittings, we’ll help you choose durable and reliable equipment from trusted manufacturers.

9. What are some common indicators that my mast needs attention? Signs that your mast may require attention include loose shrouds or stays, clanging noises while under sail, excessive movement or swaying of the mast when underway, leaks around deck penetrations connected to your mast (e.g., halyard exits), visible cracks or deformation on any part of the structure. If you notice any of these issues, it’s best to have them inspected promptly by professionals.

10. Can Mast Stepped assist with unstepping a mast too? Absolutely! Just as we specialize in mast stepping, our services also encompass unstepping masts. Whether you’re preparing for winter storage or need to address rigging maintenance, we have the expertise and equipment to safely handle the de-rigging process.

In conclusion, at Mast Stepped, we understand that proper mast stepping is essential for optimal sailing performance and safety. By addressing frequently asked questions about this process, we aim to empower boat owners with knowledge and resources to ensure their rigs are ready for every adventure on the water. Whether you decide to tackle mast stepping yourself or seek professional assistance, don’t overlook this crucial aspect of boat maintenance – your sailing experience will thank you!

The importance of proper mast stepping for sailboat performance.

Title: Elevating Sailboat Performance: Unveiling the Crucial Role of Proper Mast Stepping

Introduction: Ah, the allure of sailing! The mere thought of gliding through azure waters on a sailboat evokes a sense of freedom and adventure. Yet, behind every successful seafaring expedition lies an often overlooked factor that can make or break a sailor’s experience – proper mast stepping. In this blog, we delve deeper into the importance of ensuring your sailboat’s mast is securely and skillfully stepped, unlocking the secrets behind achieving optimal performance on the high seas.

1. Stability in Every Gust: Imagine navigating a turbulent sea only to find yourself at the mercy of every gusty squall. The trunk-like stability of proper mast stepping is precisely what separates sublime sailing from unbridled chaos. By meticulously aligning and securing your boat’s mast, you establish a foundation that resists excessive movement when encountering powerful wind currents. This stability not only enhances safety but also allows you to maintain better control over your vessel, optimizing performance even in challenging conditions.

2. Maintaining Alignment: Taming Sail Power: A crucial aspect of proper mast stepping lies in maintaining perfect alignment between your sails and rigging components. Just as an orchestra conductor ensures each musician produces harmonious melodies, correctly aligning your mast orchestrates collaboration between sail power and hull dynamics – key factors influencing boat speed and responsiveness. Through careful adjustment and tuning during mast stepping, optimum alignment can be achieved, maximizing propulsion efficiency while minimizing unnecessary strain on vital components.

3. Mastering Balance for Speed: Speed aficionados know that reducing drag is paramount to capturing those elusive knots on open waters. Correctly stepped masts enable boats to strike an equilibrium where dynamic forces align symmetrically with hydrodynamic profiles beneath the waterline—less drag equals more speed! Aligning the center of effort (where sails produce force) with the centerboard or keel down below ensures enhanced balance and a streamlined course through the waves, transforming your boat into a true speed demon.

4. The Symphonic Rigging Ensemble: Proper mast stepping unifies all elements of your sailboat’s rigging system into a harmonious symphony. Whether sails, sheaves, halyards, or shrouds – each element has its part to play in creating the perfect melody that propels you forward. By ensuring precise mast alignment during stepping, you unleash the full potential of each component to work together seamlessly, unlocking enhanced efficiency and promoting optimal performance on every seafaring escapade.

5. Defying Cataclysm: Durability and Safety: A sailboat is only as strong as its weakest link, and improper mast stepping can undermine not just performance but also safety at sea. The consequences of neglecting this critical aspect can range from sagging masts to compromised connections that give way when challenged by harsh weather or sudden jolts. Skillful mast stepping eliminates vulnerability by guaranteeing robust connections, significantly reducing the risk of structural failure or catastrophic dismasting when navigating choppy waters.

Conclusion: From beginners embarking on their maiden voyage to seasoned sailors seeking to optimize their craft’s performance, proper mast stepping remains an indispensable factor deserving meticulous attention. When done skillfully, it unveils a world where stability meets agility, harmony merges with power, and durability fuses with safety—all seamlessly working together to elevate your sailboat’s performance above all expectations. So next time you set sail, don’t overlook the importance of proper mast stepping – let it be the wind in your sails!

Common challenges and troubleshooting when stepping a mast.

Stepping a mast can often be a daunting task, especially for novice sailors or boat owners who are new to the process. It is important to approach it with caution and follow proper techniques to ensure a successful outcome. In this blog post, we will discuss some of the common challenges that you may encounter when stepping a mast and provide effective troubleshooting tips to overcome them.

1. Aligning the Mast: One of the primary challenges is aligning the mast properly during installation. Improper alignment can lead to structural issues or difficulty in raising and lowering the sails smoothly. To tackle this challenge, utilize a mast-stepping partner if available or seek assistance from crew members. Communicate clearly and establish guidelines to ensure everyone understands their roles in aligning the mast correctly.

2. Clearing Obstacles: Another challenge involves clearing any potential obstacles such as rigging lines, electrical wires, or deformed deck hardware that might hinder the smooth stepping of the mast. Conduct a thorough inspection of your boat’s setup beforehand and anticipate these obstacles in advance. If possible, reroute or temporarily remove any obstructions before beginning the process.

3. Dealing with Underneath Services: Boats often have various services passing through their decks, including plumbing lines, wiring conduits, or even fuel lines. Ensuring that these services are adequately protected during mast stepping is crucial to prevent damage while also ensuring they don’t impede the process. Consider using protective covers such as pipe insulation or duct tape where necessary.

4. Adjusting Tension: Proper tension adjustment for shrouds and stays plays an essential role in maintaining structural integrity and sail performance after stepping the mast. However, achieving optimum tension can be challenging due to factors such as limited visibility or excessive friction on turnbuckles when adjusting rigging lines under pressure. Utilize proper tools like turnbuckle wrenches or lubricants specifically designed for marine applications to ease tension adjustments effectively.

5. Securing the Mast: Once the mast is stepped and correctly aligned, it is crucial to secure it firmly while also avoiding excessive compression or stress points. Common methods include tensioning support lines (also known as “baby stays”) or using strap systems directly connected to the mast base. Ensure that these securing measures are evenly distributed on both sides of the mast and properly tensioned to maintain its stability.

6. Rigging Tuning: After successfully stepping the mast, you may need to fine-tune your boat’s rigging for optimal sailing performance. This can involve adjusting shroud tensions, forestay length, or mast rake depending on wind conditions and desired sail shape. Consult your boat’s manual or seek advice from experienced sailors to ensure proper tuning techniques specific to your vessel.

Stepping a mast requires patience, attention to detail, and a methodical approach. By understanding and addressing potential challenges in advance, you will be well-prepared to troubleshoot any problems that arise during this critical process. Remember, seeking guidance from seasoned sailors or professional riggers can greatly assist you in overcoming these challenges effectively and maintaining a safe sailing experience.

Mastering the art of mast stepping: Tips and techniques for sailboat owners.

Mastering the Art of Mast Stepping: Tips and Techniques for Sailboat Owners

Are you a proud sailboat owner? If so, then you already know that becoming an expert at mast stepping is a critical skill to possess. The process of stepping the mast might seem daunting at first, but with the right knowledge and technique, it can be mastered in no time. In this blog post, we will delve into the intricacies of mastering this art form, offering you valuable tips and techniques that will make raising your sailboat’s mast a breeze.

1. Safety First – Before even attempting to step your boat’s mast, ensure that safety is at the forefront of your mind. Taking precautions such as wearing appropriate safety gear (including a sturdy helmet), having a spotter to assist you, and checking all equipment thoroughly will minimize potential risks.

2. Plan Ahead – Planning plays a pivotal role in any successful endeavor, and stepping your boat’s mast is no exception. Familiarize yourself with the manufacturer’s instructions specific to your sailboat model. Understanding the exact procedure beforehand will prevent unnecessary confusion or errors during the process.

3. Gather Your Tools – To execute this task seamlessly, prepare by gathering all necessary tools and equipment beforehand. Common tools required include a tape measure, wrenches or socket sets (size determined by fasteners), shackles or pins for connecting stays/drill booms/Bob Stay/etc., halyards (mainly used for aligning fixtures), lubricants for easier installation, grease or anti-seize compound for preventing corrosion in stainless steel fittings.

4. Proper Alignment – Aligning your sailboat’s mast correctly is crucial to avoid damage when stepping it. Start by positioning the keel amidships while ensuring that fore/aft alignment rails are straightened in line with deck plates and web frames below decks using various measurements provided within manufacturers’ guidelines.

5. Calling on Friends – Family or friends come in handy during mast stepping. Having an extra pair of hands to assist you significantly reduces stress and increases efficiency. Assigning roles helps delegation, such as someone holding the base of the mast while another person secures the stays or shrouds.

6. Slow and Steady – While eagerness may prompt a desire to rush through this process, taking it slow and steady is key. Moving too quickly can lead to mistakes, mishaps, or even accidents. Patience and attention to detail are your allies throughout mast stepping.

7. The Power of Technology – Modern technology offers various tools that simplify mast-stepping tasks. Using a block-and-tackle system or an electric winch will reduce physical strain when raising your boat’s mast, allowing for smoother operations.

8. Avoiding Snags – Ensure that all lines, halyards, and anything else that could snag on surrounding objects are cleared away before starting the mast-stepping process. This prevents unnecessary snags and potential damage to your sailboat or surrounding structures.

9. The Perfect Alignment – Achieving perfect alignment involves using halyards or temporary stays to adjust for lateral movement once the spar is raised partially but not fully secured yet – don’t be afraid to make minor tweaks until satisfied with the outcome.

10.Preventing Corrosion – Regularly inspecting fittings for corrosion is essential in maintaining your sailboat’s overall integrity. Consider using anti-seize compound or grease on stainless steel fasteners during reassembly to mitigate future corrosion risks.

Mastering the art of mast stepping requires patience, practice, and attention to detail – but with these tips and techniques under your belt, you’ll soon become a pro at this vital skill for every sailboat owner! Remember always to prioritize safety first and enjoy many successful ventures out on the open water!

Recent Posts

• Sailboat Gear and Equipment
• Sailboat Lifestyle
• Sailboat Maintenance
• Sailboat Racing
• Sailboat Tips and Tricks
• Sailboat Types
• Sailing Adventures
• Sailing Destinations
• Sailing Safety
• Sailing Techniques

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Customer Service

• Free Newsletter

Ericson 34-2 Finds Sweet Spot

How to Sell Your Boat

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Solar Panels: Go Rigid If You have the Space…

Leaping Into Lithium

The Importance of Sea State in Weather Planning

Do-it-yourself Electrical System Survey and Inspection

When Should We Retire Dyneema Stays and Running Rigging?

Rethinking MOB Prevention

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

What Your Boat and the Baltimore Super Container Ship May Have…

Check Your Shorepower System for Hidden Dangers

DIY survey of boat solar and wind turbine systems

What’s Involved in Setting Up a Lithium Battery System?

The Scraper-only Approach to Bottom Paint Removal

Can You Recoat Dyneema?

How to Handle the Head

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Re-sealing the Seams on Waterproof Fabrics

Safer Sailing: Add Leg Loops to Your Harness

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

• Sails, Rigging & Deck Gear

Revive Your Mast Like a Pro

Each spar section has unique signs of trouble to look for during inspection..

Unobtainium is the metal at the top of every Naval Architect’s wish list. It’s a perfect marine material; light, strong, stiff yet flexible—it’s as inert as gold, but costs only pennies per pound. Sadly, like the search for El Dorado, this metal quest remains more alchemy than chemistry.

For now, aluminum, especially the alloy 6061-T6, is the solid performer. It singlehandedly upstaged spruce as the mast material of choice, and for decades it’s done its job admirably. The alloy isn’t perfect, but by understanding its vulnerabilities, and mitigating those negative characteristics, the functional lifespan of an aluminum spar can be measured in decades not years.

Yes, carbon fiber spars are in many ways the next step forward. But for those intent on being cost effective and not in the hunt for a few tenths of a knot increase in boat speed, aluminum remains the cost effective alternative. In a future issue we’ll focus on carbon’s influence on spars, hulls, rigging, and sails.

Most metal masts are made from long, cylindrical billets of aluminum alloy. Each tube section is created using a powerful ram to force a heated billet (400-500 C) through a set of dies that squeeze and shape the billet into the cross section and wall thickness of a specific spar. Lots of lubricating release agent and 15,000 tons of ram pressure are used to reshape the malleable aluminum.

Billet residue is captured and recycled, while the tube shape undergoes quenching as it moves off on the runout table. The next stop in the line involves a process that draws (pulls) and straightens the tube section.

Once fully cooled, it goes through a T6 heat tempering process that elevates tensile strength from 35,000 to 45,000 psi. Lastly, spars can be anodized, painted, powder coated, or left uncoated. Some masts are extruded in half sections and machine-welded together lengthwise.

There are other aluminum alloys that are better suited to welded hull construction or used for metal casting purposes, but 6061-T6, containing small amounts of silicon, magnesium, and other trace elements, delivers the strength, stiffness and lightness that’s vital when it comes to making spars.

The “T6” alloy is weldable, but doing so anneals and weakens the area that’s welded. This is one of the reasons why, when splicing two sections together, a doubler is added internally that overlaps the junction. Excess heat buildup during the plug welding process that joins the sections is kept to a minimum. Some manufacturers mechanically fasten the junction using machine screws or heavy duty pop rivets.

Unfortunately, aluminum isn’t quite the sequel to tomorrow’s Unobtainium . Aluminum, like steel alloys, show a proclivity to oxidize. But in the case of most steel alloys, oxidation is an ongoing process that only reaches completion when the object in question has become an unrecognizable pile of rust.

Bare aluminum, on the other hand, reveals a very different oxidation curve. A shiny new piece of aluminum develops a speckled, gray, oxidized coating that actually becomes a protective layer, preventing further oxidation. Ironically, this means that the ugliest looking mast in the marina, that non-anodized, unpainted one with the aesthetic appeal of dirty socks, is about as well protected from further deterioration as the spar on the gold-plater with the automotive finish. This is the reason why most commercial mariners restrain from painting the deck and topsides of their aluminum workboats.

The root cause of this aesthetic injustice is the way moisture, especially salt water, finds every microscopic void or coating imperfection and causes aluminum to oxidize around voids and spread beneath the paint layer. By the time blisters appear and paint begins to flake, the sub surface is covered with aluminum oxide and starting to pit.

There are several ways to tame the effect of chloride-rich seawater. But when it comes to a failing painted surface, thorough prep work is essential. Modern epoxy primers help hold corrosion at bay, and single and two-part urethane coatings seal the surface. Hard-anodized or powder coated spars are even better protected, but cost more and are more complicated to refinish when they finally fail.

GALVANIC CORROSION

Galvanic corrosion is aluminum’s second major nemesis, and it stems from an electrical interaction rather than oxidation. Metals are rated on a galvanic corrosion scale that places less reactive (more noble) metals at one end and more reactive (less noble) ones at the other end.

Platinum, beryllium and magnesium lean against one of the bookends of this scale. Magnesium, a plentiful element, is strong and light, 35 percent lighter than aluminum, but way too reactive in the marine environment. Platinum and gold sit at the opposite bookend of reactivity and are so inert that all other metals become anodic in their presence. The metals that lie in between these are relatively ranked according to their behavior in an electrolyte such as seawater.

When it comes to marine applications, there aren’t many platinum thru hulls, but silicon bronze is a pretty good compromise between cost and corrosion resistance. It’s rank on the galvanic scale is toward the more noble end and it behaves as a cathode to less noble metals like zinc, brass, and aluminum, which become anodes in the proximity of more noble metals.

Unfortunately, when dissimilar metals are in direct contact, all it takes is a little rain or morning dew to set up a temporary galvanic cell. Salt spray finds all the nooks and crannies on a sailboat and as the water evaporates it leaves behind crystalized sodium chloride (NaCl). Each raindrop, wave splash or drop of dew rehydrates the electrolyte. And as every galvanic cell demonstrates, wherever two or more dissimilar metals are immersed, a current flows and the less noble material (anode) corrodes causing electrons to flow toward the more noble metal (cathode). The net result is pitting and eventual destruction of the anode.

This prolonged, double-barrel assault on an aluminum spar is most noticeable in areas where dissimilar metals make contact.

There’s an old superstition about putting a couple of silver or copper coins under the mast step, just before stepping the spar. It may have been a good luck charm in the days of iron men and wooden masts. But today, placing a copper penny or silver eagle in a wet mast step completes a highly reactive galvanic cell and creates a corrosion experiment of the first order. The right answer is to do everything possible to separate dissimilar metals. Putting a Delrin strip or dielectric PTFE tape between the hardware and the mast wall really helps.

When installing larger stainless steel hardware on a mast, it’s easy to cut out a gasket from a sheet of 30 mil thick Teflon. Also be sure to use Tef-Gel or a similar dialecrtic grease or sealant on all screw threads.

MAST INSPECTION

Once the mast has been unstepped, positioned horizontally on horses and the headsail furling gear removed, it’s time to take a close look in all the nooks and crannies where things can go wrong. I prefer a bottom up approach and group the mast into four related subsets: base, column, spreaders, and masthead. If the mast is going to be painted, postpone this DIY inspection until all the rigging and hardware has been removed. In either case, scrutinize the spar, hardware and rigging attachment points, especially where high loads are focused.

It helps to have a good magnifying glass, a pick, knife and small scraper on hand to expose and inspect oxidized areas. Place a piece of contrasting color masking tape on each point of concern as you progress toward the masthead. Once the inspection is complete, use a digital camera or smartphone to document the more serious issues. These snapshots provide a record of the location and extent of all corrosion, deep pitting and any cracks emanating from fasteners or hardware. Also record all dents or other impact damage and any sign of ongoing abrasion. Serious damage can be caused by misled wire running rigging and the cycle loading wear linked to variations in tension. Naturally, all standing and running rigging should be thoroughly inspected at this time— a topic of a future article.

AT THE BASE

Keel-stepped masts aboard many cruisers and racers are hidden below the cabin sole and reside in a wet, corrosion prone, bilge ambiance. And it’s another reason why, when a mast is unstepped, the entire support structure, step and the heel fitting deserve a close look. Check for signs of corrosion and make sure the hardware that fastens the heel fitting to the grid or other transverse and fore-and-aft support is in good shape. This structure supports compression loads and also must respond to changes in backstay tension and side loading, not to mention the shock loads of a beat to windward in heavy seas. This is also the time to do what I call spar-oscopy. Take a compact LED flashlight and tape it to the end of a long, thin PVC tube or bamboo fishing pole that will be used to look at the mast interior.

This jury-rigged light on a pole, allows you see signs of internal corrosion and gives you a chance to locate abrasion points where halyards have been misled or are rubbing on hardware. A narrow spot beam will illuminate much of the inner wall of the mast, and if the running rigging has been replaced with thin messengers and the spreader “dog bones” (cross connecting supports) have been removed, you will have a clear sight line up the spar. This is a good time to sort out any halyard overlaps.

Riggers also look for an ailment called “elephant foot.” It’s a descriptive name for the partial crumpling of the spar near the base of the mast, It’s caused by over-compression and/or a wall section that is too thin. This wrinkling is usually just above the mast step, and it indicates a condition just shy of complete failure. It can be linked to prolonged ponding to windward with excessive backstay tension and overpressuring mast jacks. In some cases a new section can be spliced into the spar. By if it’s an older mast and other significant signs of deterioration are present, it may be time to opt for a new spar. Don’t bet the farm on an “it hasn’t failed yet” assumption; hire a skilled rigger to advise on the tough calls.

At first glance, the mechanical challenge linked to stripping hardware from a mast seems rather simple. All you need are a couple of screwdrivers and you’re ready to go. Unfortunately, the gods of galvanic corrosion have placed another obstacle in the sailor’s way.

The threads of those stainless steel screws attaching hardware to base plates or to the mast wall itself have become so corroded they are likely to be screwdriver-proof. Part of the blame goes to original hardware installers, who gave little attention to coating threads with an anti-seize compound and the effect it would have on future maintenance.

So after some years or decades, when it’s time to see what lies underneath the hardware, my first step is to clean all oxidation, paint and grime away from the screw slots and make sure that the chosen screwdriver fills the entire slot. A snug fit is the goal. Then, if a good counter clockwise twist fails to elicit any rotation, it’s time to add a wrench to the screw driver and deploy a good deal more torque.

If this also fails to loosen the bugger, I go to plan B before I ruin the screw slot. Step one is to use a pick to scrape away oxidation around the screw head perimeter. The next step is to douse the area with a penetrant such as PB Blaster, CRC’s Ultra Screwloose, Knocker Loose Plus, Gasoila Free-All or a similar product (see Inside Practical Sailor blog post, “More Boat Tips: Unsticking Stuck Nuts and Bolts”).

Before once again applying torque to the problem, I spend some time using a drift pin and a small ball-peen hammer to tap each chemically soaked fastener. Afterwards I add more penetrant around each screw head. Instead of immediately reverting to a brute force approach, which more often than not leads to a broken fastener or a damaged screw slot, I let the penetrant do its thing and return the next day with my portable impact driver and assortment of screw driver bits. The small Makita impact tool applies a pulsing torque. Combined with a little penetrant and a lot of patience, I’ve found this tool to be very effective on stubborn fasteners. Screw diameters of ¼ inch or less are not hard to snap so use pulsing torque is far better than more leverage and brute force.

If the screw slot is damaged it’s time to switch gears and be ready to drill out the head of the screw and pull the hardware off the remaining stud. A stud remover fitted to a socket wrench works better than vise grips when it comes to backing out a headless screw. But it requires a half-inch or more of the screw stem to be exposed.

The secret to drilling off the damaged head of a screw involves the use of a drill bit made for stainless steel. Place it in the chuck of a low-speed drill that delivers ample torque at slow speeds. Those using a dull bit and a high-speed drill are likely to work-harden the stainless steel screw head, making it even harder to drill. Applying cutting oil that both cools and lubricates a bit will make drilling more effective.

ALONG THE COLUMN

A sailboat mast is like a long electrical fuse: one bad spot and the show is over. Critical failures are usually linked to standing rigging failures and can occur at toggle or tang attachment points, on the spar itself or at spreader tips and roots. Upper shroud tang fittings, near the masthead, need a close look. Check clevis pin holes for elongation and Tball or stem ball cups for deformation.

Sight along the open spans of the spar, where no hardware is attached. It should be free of abrasion marks and signs of halyard shackle damage. It’s surprising how many painstakingly applied paint jobs are ruined by halyard slating cause by poorly set halyards. During this part of the inspection also check exit sheaves, winch bases/pads, mast steps, the bow light, radar bracket and other attached hardware.

The gooseneck fitting and boom vang points of attachment are highstress areas and prone to developing stress cracks. Just below this union, forces converge at the mast partners, the reinforced area where a keelstepped spar passes through the deck. Check here for stress-related damage as well as corrosion issues. If you find signs of extensive pitting or stress cracks, a cosmetic repair can be more harm than help. Have a local rigger with a good reputation take a close look at what you have uncovered.

The mainsail mast track should be straight and the slugs, slides or cars that run in or on them should slide freely. Take an extra slide or car and hand test the track, identifying any points where friction increases. Problems are often caused by burred or dented metal, oxidation in an internal track or misalignment at track joints. Most of these issues are easy to resolve while the spar is horizontal and access is optimized. In-mast or in-boom furling systems each have an inspection and maintenance routine outlined by the manufacturer. Maintaining optimum reliability revolves around following these guidelines. Care should be taken to avoid keeping paint and primer from hampering track function.

Search for causes of abrasion, eliminate the dings and dents from halyard shackles by solving lead problems. And be on the lookout for hairline cracks emanating from fasteners on the leading edge of the mast. Modern spar design accounts for backstay tensioning that induces bend in the mast to adust headsail shape. This bending results in an intentional tension increase on the spar’s leading edge, adding new stress to a column already in compression. Small cracks emanating from fasteners on the leading edge of the mast can be enlarged as the mast is intentionally bowed.

Every sailor who’s painted anything on their boat has plenty of tips to share. But when it comes to useful insider advice, pay more attention to the pros who have learned what works over many years. The good news is that although paint brand allegiance may vary, generic mast prep and painting techniques have a high degree of correlation.

When it comes to the first step in the prep process, every expert sings the same refrain. Remove the hardware if possible, especially if there’s any sign of blistering or paint failure around the edges. If there’s no sign of any corrosion at all, and the fasteners are likely to snap rather than release, carefully prep and tape around the hardware.

Sand, wire brush or sand/soda blast all areas where corrosion has pitted or left the surface covered with white aluminum oxide. Take a close look at the heel of the mast and the mast step itself. Both need to be free of corrosion and not damaged by metal loss or physical damage. The same goes for the area where spreaders, stays and shrouds attach. The masthead fitting also deserves close scrutiny. Inspect the aluminum around where the sheave axle(s) attach. A corroded aluminum masthead truck, with deterioration around the support for headstay or backstay toggles, can spell disaster. This corrosion inspection is a good time to catch pending problems.

In most cases, OEM painted spars hold up quite well, especially those that have been carefully prepped, epoxyprimed and LPU top coated. Eventually, weathering causes the gloss to disappear, but the paint retains excellent adhesive quality. If you’re facing such a challenge and there’s little or no sign of physical damage or corrosion around hardware, there’s nothing wrong with simply renewing the top coat.

In such cases, begin with a wash and/ dewax cleanup, sand with 220/320, remove dust, tape off hardware, solvent wipe and apply of two coats of the same (or similar type) topcoat, scuff-sand between coats.

However, if there are dings, scrapes or areas where corrosion has damaged the coating or areas where paint adhesion is failing, a decision must be made between spot repairs and complete mast redo. The latter involves removal of most or all of the hardware and stripping off every bit of the old paint. A spot repair approach is much less labor intensive, but if corrosion is rampant, spot repairing can be counterproductive.

During the prep process it’s essential to clean and degrease the surface before doing any sanding or other abrasive work. I prefer to use the solvent/cleaner of the paint manufacturer I’ve chosen. Clean cotton rags work best, and by meticulously wet wiping the surface you eliminate contaminants that can be forced into the substrate during sanding.

In the case of a repair and recoat effort, once the corrosion and flaking paint have been removed, feather in the adjacent painted mast surface with 60- 80 grit paper to achieve a toothy grip for the epoxy primer that follows. When doing a spot repair, this taper zone becomes an important test of one’s ability to feather an edge and hide the old to new paint junction. Seamless blending of the primer sets the stage for a successful, smooth transition spot repair. If, as you sand the boundary, the old paint continues to flake rather than allow you to feather the edge, It time to switch gears and consider removing all the paint.

An important step in painting aluminum is to get an epoxy primer on a freshly sanded and clean surface as soon as possible. When painting an entire spar, It helps if you can set up a way to hang the mast at waist level so it can be rotated in order to access all surfaces efficiently.

PRODUCT UPDATE

Interlux recommends doing the degrease wipe down with their 202 Solvent Wash prior to sanding. Then prime the spar using their InterProtect 2000E/2001E, thinned 15-20% with their brush or spray reducer. It’s a user friendly epoxy primer and easy to sand. Two coats makes the 60-80 grit sanding marks disappear. Both single-part Bright Sides and two part Perfection deliver a smooth glossy finish. The former is easier to apply and the latter is more durable and long lived.

Pettit offers a complete lineup of aluminum paint and prep products. Their approach kicks off with a solvent clean and a medium grit emery cloth sanding. When the residue has been removed, a thin coat of #6455 Primer should be applied. Two hours later, EZ Prime #6149 is applied and when it’s cured and sanded with 220 (repeat if necessary). Finish with two coats of Easypoxy.

Awl Grip recommends an initial cleaning with their surface cleaner T340 followed by a vigorous Scotchbrite scrubbing with Deoxidine and a thorough rinse to remove all residue. When dry prime with 30-Y-94 and within 3-6 hours, without sanding, apply 545 epoxy primer. Sand 220/320 and top coat with Awl Craft 2000.

If the spar was previously anodized precede the above with a 10-minute wash using a 33% solution of natrium hydroxide. Don’t let the solution dry on the spar. Immediately water-rinse and follow the prime and paint process above.

Spreader junctions are like a dangerous highway intersection, a point where competing forces interact and where there are no traffic lights to tame the flow. Rigging tension on the windward side of a sailboat cause compression loads to increase in the windward spreader(s) and decrease in the leeward spreader(s). Discontinuous standing rigging optimizes wire/rod diameter in each panel section, but it also complicates spreader tip hardware. All too often, spreader boots or a well-meaning taping effort, ends up looking like a response to an ankle injury. Even worse it creates a moisture-holding corrosion bath that enhances galvanic corrosion and oxidation. The goal is to avoid going overboard with padding and tape and making sure that water will not collect around spreader tip hardware.

Spreader bases are another realm of serious concern due to cycle loading, multidirectional forces and dissimilar metal contact. Swept back spreaders, especially those that eliminate the need for a backstay, cope with even greater loads. So when the rig is un-stepped, check how the spreader attachment was engineered. Was a doubler added to the mast wall and/ or were cutouts installed and hardware added to connect spreader pairs? In either case, corrosion in key load path areas can greatly decrease the spar’s ability to cope with the fluctuating loads. It’s no surprise that masts often break just above a set of spreaders.

AT THE MASTHEAD

Once launched, it’s hard to see what’s going on at the masthead. This means that when the spar is down it’s time to get a really close look at the mast truck and its associated fittings. Begin by disconnecting the standing rigging and checking the geometry of every hole that supports a clevis pin. The rule of thumb is: round is good, elliptical is bad. This goes for the tangs that connect upper shrouds to the spar as well as the holes in a welded aluminum masthead fitting. The loss of an upper shroud while beating to windward usually brings down the mast, so extra attention in this area is time well spent.

Carbon spar manufacturing mimics the engineering pioneered in the aerospace industry. They have become an essential component In the most competitive ranks of sailboat racing and caught on with cruising sailors who own lighter, more performance oriented sailboats.

Most spars are built on metal mandrels by carefully aligning layers of prepreg unidirectional and multi-axial carbon fiber from masthead to heel. Intermittently, a debulking process is used to squeeze the layers together, and after the laminate schedule has been carefully aligned, it’s placed in an autoclave. Here the epoxy prepreg in the carbon material becomes viscous and cures under controlled heat and air pressure. These materials are expensive, the labor is time-consuming and the quality control must be rigorous.

One of the major advantages of carbon mast building is the ability to engineer the layup to coincide with the load paths and stresses in the structure. Finite element analysis has helped identify how and where forces are transferred through the tube section. Weight is saved by only adding material where it is needed.

A cruising boat designer may opt for extra reinforcement that increases the safety factor by raising the breaking point of the material. Racing sailors have validated the performance uptick associated with carbon spars. Carbon/epoxy laminates do not suffer from corrosion but they are anything but immune to UV light. It’s one of the reasons a white primer and LPU topcoat is the sensible finish.

Minor impact damage and abrasion from poorly led running rigging is fairly straight forward to repair. But damage linked to sailing loads that cause major cracks in the laminate or interlayer delamination is another story altogether. In these cases, the spar builder or a composites shop engineer has some tough decisions to make. The big challenge is when a high-tech laminate bundle fails it’s very difficult to scarf in a new section that will handle all the loads in a manner that’s equivalent to, let alone, better than new. Some insurance companies put restrictions or higher premiums on coverage of carbon masts.

RELATED ARTICLES MORE FROM AUTHOR

Leave a reply cancel reply.

Log in to leave a comment

Latest Videos

What’s The Best Vinyl Window Cleaner for Your Boat?

40-Footer Boat Tours – With Some Big Surprises! | Boat Tour

Electrical Do’s and Don’ts

Bahamas Travel Advisory: Cause for Concern?

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

• Forums New posts Unanswered threads Register Top Posts Email
• What's new New posts New Posts (legacy) Latest activity New media
• Media New media New comments
• Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
• Classifieds Sell Your Boat Used Gear for Sale
• Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
• Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe

mast partners

• Thread starter NYSail
• Start date Mar 15, 2006
• Forums for All Owners
• Ask All Sailors

Hello all. Please pardon this ignorant question, but a keel steped mast is new to me. When you say mast partners is that referring to the area between the mast and the deck plate? I was not there when the broker took the mast down so I did not see everything. Also, I am finding I am missing a few rigging items and want to make sure I have everything I am suppose to have prior to launch time.ThanksGregP36-2  

The mast partners are the hole in the deck the mast fits through. There are wedges fitted between the mast and the sides of the hole, these help to support the mast and should all be kept with the boat when the mast is removed.  

Thanks! That is what I thought, however the diagram in my manual looks as if there is a sleeve that fits around the mast that fits within the deck plate.....I think I was just over thinking it.....Greg  

There is sometimes a "boot" that is used to help keep water out after the wedges are in place.  

Got the rubber boot that is around the mast. That is still attached to the mast. I need a canvas cover though as the broker "lost" that along with the mast wedges. I am looking into spartite...looks like a pretty good set-up. Thanks for your help!Greg  

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

• Search forums

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature currently requires accessing the site using the built-in Safari browser.

• Welcome to this website/forum for people interested in the Morgan 38 Sailboat . Many of our members are 'owners' of Morgan 38s, but you don't need to be an owner to Register/Join.
• Morgan Community
• Main Morgan 38 Sailboat Forum

Mast Partners and Wedges

• Thread starter terry_thatcher
• Start date Jul 3, 2020

terry_thatcher

Terence thatcher.

• Jul 3, 2020

I recently re-stepped my mast, after struggling to unstep it several months ago. The problem then was mast base corrosion and perhaps SparTite adhesion. As I look at the mast partners again, I see the SparTite problem. The partners have an aluminum cap. That creates a channel, sort of an indentation, that the SparTite fills, which then means it cannot easily slip up out of the partners. Before I restepped the mast, I should have filled that with polisulfide caulking, but I did not think of it in time. I don't think I can get in there now, with the mast in, to fill that void. Anyway, here is my question: I think I need to go back to wood wedges for the mast. Before I proceed, I wanted to know what others do to support and center the mast at the partners. If you use wood or rubber or plastic wedges, what kind of material (or species of wood) do you use. Thanks.  

terry_thatcher said: I recently re-stepped my mast, after struggling to unstep it several months ago. The problem then was mast base corrosion and perhaps SparTite adhesion. As I look at the mast partners again, I see the SparTite problem. The partners have an aluminum cap. That creates a channel, sort of an indentation, that the SparTite fills, which then means it cannot easily slip up out of the partners. Before I restepped the mast, I should have filled that with polisulfide caulking, but I did not think of it in time. I don't think I can get in there now, with the mast in, to fill that void. Anyway, here is my question: I think I need to go back to wood wedges for the mast. Before I proceed, I wanted to know what others do to support and center the mast at the partners. If you use wood or rubber or plastic wedges, what kind of material (or species of wood) do you use. Thanks. Click to expand...

Were you able to get inside the partners with the mast up to lay in the vaseline?  

I loosened the shrouds a bit and ran a line to the mast to a turning block then the main winch. It didn't take so that much tension. I had to pull it starboard, port and forward one side at a time to make room all around. then filled with the provided clay, got it smooth then put on Vaseline one side at a time. Helps to have a partner with small hands or a rag and screwdriver but I think I eliminated any snag points.  

Bill Harney

I make wedges out of softwood like cedar or pine, tapered cedar shingles can also work. Then I use 6 inch white shrink-wrap tape to cover the wedges and seal to the mast. Easy, cheap and effective and lasts all season.  

Richard Kilroy

• Jul 5, 2020

Terry: known you a long time on this site. I think your mast was in the boat for a long time. I still have the original gromets supplied by Morgan on my mast, it is removed annually. The spar tite product I used in the boat I kept in the Caribbean for 14 years Is another story. The mast removal almost lifted the boat, had to be pulled On a number of times To get it to release. The rubber grommet with the upper collar that Morgan supplied is excellent in my opinion. However I don’t think it can be duplicated. I would go with the softer wood partners, tapered accurately with a flange on the upper edge if possible. And I would pay regular attention to them, as the mast deck arrangement in the Morgan does move.  

Warren Holybee

Active member.

• Jul 6, 2020

Do any of you have pictures of your work? I have not addressed this area at all, and other than some sealant to keep it from leaking, I'm not sure what if anything is even there. When my mast was briefly unstepped (and re-stepped later that same day) in preparation for the pacific cup, the mast lifted out easily and dropped back in easily. All I did was remove and reinstall the mast boot and cover. And later when it leaked I added some 3M4000. There is an aluminum plate bolted to the deck around the mast, but I have no idea what is under it. I wonder if it needs more support. (though it has survived extensive offshore abuse) When I am at anchor, if I get a light breeze (about 5 kts) on the beam my mast pumps. No amount of rig tuning will fix it. I have attributed it to my tides marine track disturbing the airflow when the wind is on the beam, but maybe the mast partner is a factor as well.  

Mark Pearson

Dave Ahlers

Warren Holybee said: Do any of you have pictures of your work? I have not addressed this area at all, and other than some sealant to keep it from leaking, I'm not sure what if anything is even there. When my mast was briefly unstepped (and re-stepped later that same day) in preparation for the pacific cup, the mast lifted out easily and dropped back in easily. All I did was remove and reinstall the mast boot and cover. And later when it leaked I added some 3M4000. There is an aluminum plate bolted to the deck around the mast, but I have no idea what is under it. I wonder if it needs more support. (though it has survived extensive offshore abuse) When I am at anchor, if I get a light breeze (about 5 kts) on the beam my mast pumps. No amount of rig tuning will fix it. I have attributed it to my tides marine track disturbing the airflow when the wind is on the beam, but maybe the mast partner is a factor as well. Click to expand...

dave_a said: Warren, try wraping/spiraling a halyard around the mast. That sometimes will stop the pumping. It disrupts the air flow or something like that. Click to expand...

Warren - for the first 6 years we had Zia, she did the mast pumping you describe. Usually when sailing in light air, but even sitting at the dock. Then a couple of years ago I had a very good rig tuner tune her rigging. I'm not sure exactly what all he tuned, but it hasn't happened since. One thing he fixed is her spreaders were drooping and he got them pointed slightly up again. Don't know if that was a factor - he also adjusted lots of turnbuckles, etc. I wish I would have had the time to get a description of what he did. I installed a Tides Strong Track a couple of years ago so I doubt if that is the culprit.  

James M. Cleary

We battled the pumping rig for a long time. Dana also has the Tides Strong Track and that is not an issue. A rigger made a simple suggestion and it seems to be working. He said to put more tension on the forward lower shrouds to pull the middle of the rig forward. I have been tuning the rig with that in mind for a lot of years now and the pumping is much less evident. Not completely gone, but I'd guess about 90% gone. Jim  

Ken Ferrari

RigRite owns Kenyon spars now and sells the mast wedge strips that originally came with the boat. These are a single piece of "rubber" that wraps all of the way around the mast. It's a pretty nice system. But, like everything else from RigRite, they are RIDICULOUSLY expensive and their customer service blows. The price is the reason I used SparTite when it was time to replace. I had great luck with SparTite and have pulled the mast since installing. The mast popped right out. Far easier than getting the original wedge out. I had to destructively dig the original wedge system out of the boat because the mast wouldn't come out otherwise. Here is the RigRite product: Mast Wedge with Flange: K-77509 The original wedge was white, but I'm 99% certain that this is the same product - different color. Here is the page specific to the 382 mast section: Kenyon Spars 6092 Mast Section (This page also gives a pretty good indication about how oversized this mast section is for our boats. Check out the size of the other boats this same section was used on.)  

Here are some photos of the original wedge system from my boat. It's partially destroyed in the photos. The crane operator was waiting for me to dig it all out because the mast would not come out without removing this wedge.  

Attachments

• Jul 7, 2020

Thanks everyone for comments. Pulling the mast after it was in for 18 years was a problem. But the real issue was aluminum corrosion at the base, even though I had anodized the mast step. That is partly my own fault for not keeping the drains clear in the mast step and partly Morgan's fault for not having a proper mast step and mast base. See Attainable Adventure Cruising on best mast step designs. My rigger suggests hard wood for wedges, teak or white oak. I never had the original rubber wedge contraption. Mark, be very careful with Spartite. It will work, I believe, only if you fill the space/gap below the aluminum collar as Tyree did--although I might use polysulfide caulking rather than the clay. Otherwise, the Spartite will fill that gap and will not slide out of thbe partners. Alternatively, you don't fill that gap, you will have to remove the aluminum collar to pull the mast. That is not impossible. Mine is screwed in with 8 or so screws. Also, use lots of vaseline, both on the mast and the partners. Again, see suggestions at Attainable Adventure Cruising. I haven't decided which route--Spartite or wedges--to pursue myself. I have a month's worth of work just putting every fitting back on the boat after the paint job.  

jimcleary said: We battled the pumping rig for a long time. Dana also has the Tides Strong Track and that is not an issue. A rigger made a simple suggestion and it seems to be working. He said to put more tension on the forward lower shrouds to pull the middle of the rig forward. I have been tuning the rig with that in mind for a lot of years now and the pumping is much less evident. Not completely gone, but I'd guess about 90% gone. Jim Click to expand...

Warren Dana lives on a mooring and/or an anchor and is almost always vaned into the wind. The pumping has been associated with the wind abeam. Since doing the tension on the fwd/lowers it truly has reduced the effect when we do get to be abeam to the wind. On our first 8 month trip down to the Bahamas we had the pumping. On the second 8 month journey we didn't. The only difference was the rig tension. I would like to hear from anyone who has tried this or any other solution and what success they have had. Jim  

Does anyone have any pictures of the aluminum collar, partners, or wedges of which Terry speaks? In Ken's photos above, I think I see the aluminum collar, with the pan-head screws going vertically down. I've not seen ours yet and I don't really understand how it's all rigged. I'm going to cut off our disintegrating "boot" this weekend which looks like some kind of rubber tape. Hopefully I can then see the aluminum collar & partners and I'll comprehend. Also, our mast has not been stepped for 16+ years. Is anyone aware of recommendations for pulling the mast periodically to clean up the aluminum corrosion at the base? I did have standing water there for a while because of plugged drains, which I routinely check now.  

Warren Holybee said: More tension on the forwards didn't help. I tensioned them, which caused the uppers to go a bit loose, then I tensioned the uppers then lowers again, and continued that until I wasn't comfortable to how much the hull was flexing. I also had as much mast bend as a high performance racer. It didn't help. So after returning to "normal" tuning with just a bit of bend, I added a removable babystay that I stow while I sail. Maybe the real fix is to add a staysail! I have lived on my boat full time for more than 2 years now. You might not have it 90% fixed, you just might not be on the boat in the middle of the night once each week when it happens. I still think the tides track is an issue. It will disturb wind at the after of the mast, while wind is still rushing past the front. That will pull the mast forward. I now also think the mast partner might be an issue as well. Click to expand...

Mark, once you get your boot off,it should all be clear--except the gap between the aluminum and glass is down in the hole an inch and a half or so. Also, I think I may have dealt with the corrosion: first, I coated everything with a lot of TefGel, which is amazing stuff. And I will try to remember to clear the drains at he base of the mast.  

mpearson said: Does anyone have any pictures of the aluminum collar, partners, or wedges of which Terry speaks? In Ken's photos above, I think I see the aluminum collar, with the pan-head screws going vertically down. I've not seen ours yet and I don't really understand how it's all rigged. I'm going to cut off our disintegrating "boot" this weekend which looks like some kind of rubber tape. Hopefully I can then see the aluminum collar & partners and I'll comprehend. Also, our mast has not been stepped for 16+ years. Is anyone aware of recommendations for pulling the mast periodically to clean up the aluminum corrosion at the base? I did have standing water there for a while because of plugged drains, which I routinely check now. Click to expand...

I went through my emails to find the quote I received from RigRite back in 2015 for their rubber mast wedge. The wanted $180. No thanks!  

• Jul 8, 2020

datswite said: Mark, while you have your mast down, make sure you give a GOOD inspection to the compression sleeves at both the cap shrouds and the lowers. I found small cracks on 3 out of 4 locations. In addition, make sure to inspect closely the welds at the masthead sheeve box. I found that crack a few weeks before shoving off across the Atlantic. I hired Brion Toss (RIP) to take a look, and his assessment was that this was a serious matter that should be addressed before heading offshore. *You have to zoom all of the way in to see the crack at the masthead sheeve box. It's in the lower left corner of the sheeve box opening. Click to expand...

datswite said: Warren - Are you saying that you don't have anything between the mast and the partners? It's just a gap? If it's just a gap, that entirely explains why you have such noticeable mast pumping. You should really have some mast wedges or SparTite filling the gap to provide support to the lower third of the mast. The lower stays not only provide support to the upper "third" of the mast, they also provide a significant amount of rigidity. The mast wedges provide that same rigidity for the lower "third". Masts don't have a lot of strength in compression - they need to be supported. All of that "working" in your mast could really cause problems. Take a look at this article. Or, this one. Click to expand...

Warren Holybee said: The pictures you posted earlier do look familiar and I remember more now. There was "stuff" in there that looked like your pictures, and was very deteriorated. Whatever it was, it isn't supporting anything. With my memory now jogged, I asked my rigger about it, and it was shrugged off "we probably should have replaced that, but will have to do it next time." The mast dropped in easily, and I just put the boot and cover back on. Anyway, good to know that it might be a simple fix. I also had a lower fail going down the very brutal Mozambique channel, and never got a clear reason why. Now I also have a reason, which makes me feel better. It's something I can fix to prevent from happening again. Click to expand...

Warren Holybee said: More tension on the forwards didn't help. I tensioned them, which caused the uppers to go a bit loose, then I tensioned the uppers then lowers again, and continued that until I wasn't comfortable to how much the hull was flexing. I also had as much mast bend as a high performance racer. It didn't help. So after returning to "normal" tuning with just a bit of bend, I added a removable babystay that I stow while I sail. Maybe the real fix is to add a staysail! Click to expand...

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

DWYER MAST & RIGGING

The Aluminum Mast C ompany

Quality Sailboat Masts, Booms, Hardware and Rigging Since 1963

Dwyer Mast & Rigging manufactures high-quality sailboat masts, booms, hardware, and rigging. Originally founded in 1963 as Dwyer Aluminum Mast Company, the legacy continues as an OEM supplier by taking advantage of improved manufacturing methods to offer a wide range of products and services for the marine industry.

Our Services Include

Mast & Boom Extrusions   //  Dinghy & Keelboat Spars   // Standing & Running Rigging  //  Hardware & Blocks   //  Round Tubing   // OEM Supplier // Waterjet Technology //  & more...

Manufacturing for the Marine Industry

Our formula for growth is simple - we never compromise with quality. By taking advantage of improved manufacturing methods and an ever-increasing volume, we have been able to maintain competitive prices and continue to provide much needed product to sailors, riggers, and boat builders. 

Products & Servic es

Cont act Us

Sailboat Parts Explained: Illustrated Guide (with Diagrams)

When you first get into sailing, there are a lot of sailboat parts to learn. Scouting for a good guide to all the parts, I couldn't find any, so I wrote one myself.

Below, I'll go over each different sailboat part. And I mean each and every one of them. I'll walk you through them one by one, and explain each part's function. I've also made sure to add good illustrations and clear diagrams.

This article is a great reference for beginners and experienced sailors alike. It's a great starting point, but also a great reference manual. Let's kick off with a quick general overview of the different sailboat parts.

General Overview

The different segments

You can divide up a sailboat in four general segments. These segments are arbitrary (I made them up) but it will help us to understand the parts more quickly. Some are super straightforward and some have a bit more ninja names.

Something like that. You can see the different segments highlighted in this diagram below:

The hull is what most people would consider 'the boat'. It's the part that provides buoyancy and carries everything else: sails, masts, rigging, and so on. Without the hull, there would be no boat. The hull can be divided into different parts: deck, keel, cabin, waterline, bilge, bow, stern, rudder, and many more.

I'll show you those specific parts later on. First, let's move on to the mast.

Sailboats Explained

The mast is the long, standing pole holding the sails. It is typically placed just off-center of a sailboat (a little bit to the front) and gives the sailboat its characteristic shape. The mast is crucial for any sailboat: without a mast, any sailboat would become just a regular boat.

I think this segment speaks mostly for itself. Most modern sailboats you see will have two sails up, but they can carry a variety of other specialty sails. And there are all kinds of sail plans out there, which determine the amount and shape of sails that are used.

The Rigging

This is probably the most complex category of all of them.

Rigging is the means with which the sails are attached to the mast. The rigging consists of all kinds of lines, cables, spars, and hardware. It's the segment with the most different parts.

The most important parts

If you learn anything from this article, here are the most important parts of any sailboat. You will find all of these parts in some shape or form on almost any sailboat.

Okay, we now have a good starting point and a good basic understanding of the different sailboat parts. It's time for the good stuff. We're going to dive into each segment in detail.

Below, I'll go over them one by one, pointing out its different parts on a diagram, listing them with a brief explanation, and showing you examples as well.

After reading this article, you'll recognize every single sailboat part and know them by name. And if you forget one, you're free to look it up in this guide.

On this page:

The hull is the heart of the boat. It's what carries everything: the mast, the sails, the rigging, the passengers. The hull is what provides the sailboat with its buoyancy, allowing it to stay afloat.

Sailboats mostly use displacement hulls, which is a shape that displaces water when moving through it. They are generally very round and use buoyancy to support its own weight. These two characteristics make sure it is a smooth ride.

There are different hull shapes that work and handle differently. If you want to learn more about them, here's the Illustrated Guide to Boat Hull Types (with 11 Examples ). But for now, all we need to know is that the hull is the rounded, floating part of any sailboat.

Instead of simply calling the different sides of a hull front, back, left and right , we use different names in sailing. Let's take a look at them.

The bow is the front part of the hull. It's simply the nautical word for 'front'. It's the pointy bit that cuts through the water. The shape of the bow determines partially how the boat handles.

The stern is the back part of the hull. It's simply the nautical word for 'back'. The shape of the stern partially determines the stability and speed of the boat. With motorboats, the stern lies deep inside the water, and the hull is flatter aft. Aft also means back. This allows it to plane, increasing the hull speed. For sailboats, stability is much more important, so the hull is rounded throughout, increasing its buoyancy and hydrodynamic properties.

The transom is the backplate of the boat's hull. It's the most aft (rear) part of the boat.

Port is the left side of a sailboat.

Starboard is the right side of a sailboat

The bilges are the part where the bottom and the sides of the hull meet. On sailboats, these are typically very round, which helps with hydrodynamics. On powerboats, they tend to have an angle.

The waterline is the point where the boat's hull meets the water. Generally, boat owners paint the waterline and use antifouling paint below it, to protect it from marine growth.

The deck is the top part of the boat's hull. In a way, it's the cap of the boat, and it holds the deck hardware and rigging.

Displacement hulls are very round and smooth, which makes them very efficient and comfortable. But it also makes them very easy to capsize: think of a canoe, for example.

The keel is a large fin that offsets the tendency to capsize by providing counterbalance. Typically, the keel carries ballast in the tip, creating a counterweight to the wind's force on the sails.

The rudder is the horizontal plate at the back of the boat that is used to steer by setting a course and maintaining it. It is connected to the helm or tiller.

Tiller or Helm

• The helm is simply the nautical term for the wheel.
• The tiller is simply the nautical term for the steering stick.

The tiller or helm is attached to the rudder and is used to steer the boat. Most smaller sailboats (below 30') have a tiller, most larger sailboats use a helm. Large ocean-going vessels tend to have two helms.

The cockpit is the recessed part in the deck where the helmsman sits or stands. It tends to have some benches. It houses the outside navigation and systems interfaces, like the compass, chartplotter, and so on. It also houses the mainsheet traveler and winches for the jib. Most boats are set up so that the entire vessel can be operated from the cockpit (hence the name). More on those different parts later.

Most larger boats have some sort of roofed part, which is called the cabin. The cabin is used as a shelter, and on cruising sailboats you'll find the galley for cooking, a bed, bath room, and so on.

The mast is the pole on a sailboat that holds the sails. Sailboats can have one or multiple masts, depending on the mast configuration. Most sailboats have only one or two masts. Three masts or more is less common.

The boom is the horizontal pole on the mast, that holds the mainsail in place.

The sails seem simple, but actually consist of many moving parts. The parts I list below work for most modern sailboats - I mean 90% of them. However, there are all sorts of specialty sails that are not included here, to keep things concise.

The mainsail is the largest sail on the largest mast. Most sailboats use a sloop rigging (just one mast with one bermuda mainsail). In that case, the main is easy to recognize. With other rig types, it gets more difficult, since there can be multiple tall masts and large sails.

If you want to take a look at the different sail plans and rig types that are out there, I suggest reading my previous guide on how to recognize any sailboat here (opens in new tab).

Sail sides:

• Leech - Leech is the name for the back side of the sail, running from the top to the bottom.
• Luff - Luff is the name for the front side of the sail, running from the top to the bottom.
• Foot - Foot is the name for the lower side of the sail, where it meets the boom.

Sail corners:

• Clew - The clew is the lower aft (back) corner of the mainsail, where the leech is connected to the foot. The clew is attached to the boom.
• Tack - The tack is the lower front corner of the mainsail
• Head - The head is the top corner of the mainsail

Battens are horizontal sail reinforcers that flatten and stiffen the sail.

Telltales are small strings that show you whether your sail trim is correct. You'll find telltales on both your jib and mainsail.

The jib is the standard sized headsail on a Bermuda Sloop rig (which is the sail plan most modern sailboats use).

As I mentioned: there are all kinds, types, and shapes of sails. For an overview of the most common sail types, check out my Guide on Sail Types here (with photos).

The rigging is what is used to attach your sails and mast to your boat. Rigging, in other words, mostly consists of all kinds of lines. Lines are just another word for ropes. Come to think of it, sailors really find all kinds of ways to complicate the word rope ...

Two types of rigging

There are two types of rigging: running and standing rigging. The difference between the two is very simple.

• The running rigging is the rigging on a sailboat that's used to operate the sails. For example, the halyard, which is used to lower and heave the mainsail.
• The standing rigging is the rigging that is used to support the mast and sail plan.

Standing Rigging

Here are the different parts that belong to the standing rigging:

• Forestay or Headstay - Line or cable that supports the mast and is attached to the bow of the boat. This is often a steel cable.
• Backstay - Line or cable that supports the mast and is attached to the stern of the boat. This is often a steel cable.
• Sidestay or Shroud - Line or cable that supports the mast from the sides of the boat. Most sailboats use at least two sidestays (one on each side).
• Spreader - The sidestays are spaced to steer clear from the mast using spreaders.

Running Rigging: different words for rope

Ropes play a big part in sailing, and especially in control over the sails. In sailboat jargon, we call ropes 'lines'. But there are some lines with a specific function that have a different name. I think this makes it easier to communicate with your crew: you don't have to define which line you mean. Instead, you simply shout 'mainsheet!'. Yeah, that works.

Running rigging consists of the lines, sheets, and hardware that are used to control, raise, lower, shape and manipulate the sails on a sailboat. Rigging varies for different rig types, but since most sailboats are use a sloop rig, nearly all sailboats use the following running rigging:

• Halyards -'Halyard' is simply the nautical name for lines or ropes that are used to raise and lower the mainsail. The halyard is attached to the top of the mainsail sheet, or the gaffer, which is a top spar that attaches to the mainsail. You'll find halyards on both the mainsail and jib.
• Sheets - 'Sheet' is simply the nautical term for lines or ropes that are used to set the angle of the sail.
• Mainsheet - The line, or sheet, that is used to set the angle of the mainsail. The mainsheet is attached to the Mainsheet traveler. More on that under hardware.
• Jib Sheet - The jib mostly comes with two sheets: one on each side of the mast. This prevents you from having to loosen your sheet, throwing it around the other side of the mast, and tightening it. The jib sheets are often controlled using winches (more on that under hardware).
• Cleats are small on-deck hooks that can be used to tie down sheets and lines after trimming them.
• Reefing lines - Lines that run through the mainsail, used to put a reef in the main.
• The Boom Topping Lift is a line that is attached to the aft (back) end of the boom and runs to the top of the mast. It supports the boom whenever you take down the mainsail.
• The Boom Vang is a line that places downward tension on the boom.

There are some more tensioning lines, but I'll leave them for now. I could probably do an entire guide on the different sheets on a sailboat. Who knows, perhaps I'll write it.

This is a new segment, that I didn't mention before. It's a bit of an odd duck, so I threw all sorts of stuff into this category. But they are just as important as all the other parts. Your hardware consists of cleats, winches, traveler and so on. If you don't know what all of this means, no worries: neither did I. Below, you'll find a complete overview of the different parts.

Deck Hardware

Just a brief mention of the different deck hardware parts:

• Pulpits are fenced platforms on the sailboat's stern and bow, which is why they are called the bow pulpit and stern pulpit here. They typically have a solid steel framing for safety.
• Stanchons are the standing poles supporting the lifeline , which combined for a sort of fencing around the sailboat's deck. On most sailboats, steel and steel cables are used for the stanchons and lifelines.

Mainsheet Traveler

The mainsheet traveler is a rail in the cockpit that is used to control the mainsheet. It helps to lock the mainsheet in place, fixing the mainsails angle to the wind.

If you're interested in learning more about how to use the mainsheet traveler, Matej has written a great list of tips for using your mainsheet traveler the right way . It's a good starting point for beginners.

Winches are mechanical or electronic spools that are used to easily trim lines and sheets. Most sailboats use winches to control the jib sheets. Modern large sailing yachts use electronic winches for nearly all lines. This makes it incredibly easy to trim your lines.

You'll find the compass typically in the cockpit. It's the most old-skool navigation tool out there, but I'm convinced it's also one of the most reliable. In any way, it definitely is the most solid backup navigator you can get for the money.

Want to learn how to use a compass quickly and reliably? It's easy. Just read my step-by-step beginner guide on How To Use a Compass (opens in new tab .

Chartplotter

Most sailboats nowadays use, besides a compass and a map, a chartplotter. Chartplotters are GPS devices that show a map and a course. It's very similar to your normal car navigation.

Outboard motor

Most sailboats have some sort of motor to help out when there's just the slightest breeze. These engines aren't very big or powerful, and most sailboats up to 32' use an outboard motor. You'll find these at the back of the boat.

Most sailboats carry 1 - 3 anchors: one bow anchor (the main one) and two stern anchors. The last two are optional and are mostly used by bluewater cruisers.

I hope this was helpful, and that you've gained a good understanding of the different parts involved in sailing. I wanted to write a good walk-through instead of overwhelming you with lists and lists of nautical terms. I hope I've succeeded. If so, I appreciate any comments and tips below.

I've tried to be as comprehensive as possible, without getting into the real nitty gritty. That would make for a gigantic article. However, if you feel I've left something out that really should be in here, please let me know in the comments below, so I can update the article.

I own a small 20 foot yacht called a Red witch made locally back in the 70s here in Western Australia i found your article great and enjoyed reading it i know it will be a great help for me in my future leaning to sail regards John.

David Gardner

İ think this is a good explanation of the difference between a ”rope” and a ”line”:

Rope is unemployed cordage. In other words, when it is in a coil and has not been assigned a job, it is just a rope.

On the other hand, when you prepare a rope for a specific task, it becomes employed and is a line. The line is labeled by the job it performs; for example, anchor line, dock line, fender line, etc.

Hey Mr. Buckles

I am taking on new crew to race with me on my Flying Scot (19ft dingy). I find your Sailboat Parts Explained to be clear and concise. I believe it will help my new crew learn the language that we use on the boat quickly without being overwhelmed.

PS: my grandparents were from Friesland and emigrated to America.

Thank you Shawn for the well written, clear and easy to digest introductory article. Just after reading this first article I feel excited and ready to set sails and go!! LOL!! Cheers! Daniel.

steve Balog

well done, chap

Great intro. However, the overview diagram misidentifies the cockpit location. The cockpit is located aft of the helm. Your diagram points to a location to the fore of the helm.

William Thompson-Ambrose

An excellent introduction to the basic anatomy and function of the sailboat. Anyone who wants to start sailing should consider the above article before stepping aboard! Thank-you

James Huskisson

Thanks for you efforts mate. We’ve all got to start somewhere. Thanks for sharing. Hoping to my first yacht. 25ft Holland. Would love to cross the Bass Strait one day to Tasmania. 👌 Cheers mate

Alan Alexander Percy

thankyou ijust aquired my first sailboat at 66yrs of age its down at pelican point a beautifull place in virginia usa my sailboat is a redwing 30 if you are ever in the area i wouldnt mind your guidance and superior knowledge of how to sail but iam sure your fantastic article will help my sailboat is wings 30 ft

Thanks for quick refresher course. Having sailed in California for 20+ years I now live in Spain where I have to take a spanish exam for a sailboat license. Problem is, it’s only in spanish. So a lot to learn for an old guy like me.

Very comprehensive, thank you

Your article really brought all the pieces together for me today. I have been adventuring my first sailing voyage for 2 months from the Carolinas and am now in Eleuthera waiting on weather to make the Exumas!!! Great job and thanks

Helen Ballard

I’ve at last found something of an adventure to have in sailing, so I’m starting at the basics, I have done a little sailing but need more despite being over 60 life in the old dog etc, thanks for your information 😊

Barbara Scott

I don’t have a sailboat, neither do l plan to literally take to the waters. But for mental exercise, l have decided to take to sailing in my Bermuda sloop, learning what it takes to become a good sailor and run a tight ship, even if it’s just imaginary. Thank you for helping me on my journey to countless adventures and misadventures, just to keep it out of the doldrums! (I’m a 69 year old African American female who have rediscovered why l enjoyed reading The Adventures of Robert Louis Stevenson as well as his captivating description of sea, wind, sailboat,and sailor).

Great article and very good information source for a beginner like me. But I didn’t find out what I had hoped to, which is, what are all those noisy bits of kit on top of the mast? I know the one with the arrow is a weather vane, but the rest? Many thanks, Jay.

Louis Cohen

The main halyard is attached to the head of the mainsail, not the to the mainsheet. In the USA, we say gaff, not gaffer. The gaff often has its own halyard separate from the main halyard.

Other than that it’s a nice article with good diagrams.

A Girl Who Has an Open Sail Dream

Wow! That was a lot of great detail! Thank you, this is going to help me a lot on my project!

Hi, good info, do u know a book that explains all the systems on a candc 27,

Emma Delaney

As a hobbyist, I was hesitant to invest in expensive CAD software, but CADHOBBY IntelliCAD has proven to be a cost-effective alternative that delivers the same quality and performance.

https://www.cadhobby.com/

Leave a comment

You may also like, guide to understanding sail rig types (with pictures).

There are a lot of different sail rig types and it can be difficult to remember what's what. So I've come up with a system. Let me explain it in this article.

The Ultimate Guide to Sail Types and Rigs (with Pictures)

The Illustrated Guide To Boat Hull Types (11 Examples)

How To Live On a Boat For Free: How I'd Do It

How To Live on a Sailboat: Consider These 5 Things

Own your first boat within a year on any budget.

A sailboat doesn't have to be expensive if you know what you're doing. If you want to learn how to make your sailing dream reality within a year, leave your email and I'll send you free updates . I don't like spam - I will only send helpful content.

Ready to Own Your First Boat?

Just tell us the best email address to send your tips to:

~ Back to Spars Main Page ~

• Sailboat Hardware
• Sailboat Blocks

91153 Mast Partner /Optimist

Write a review.

• Create New Wish List
• Description
• Related Products

Harken Optimist Mast & Boom Bag

JCD Etchells Mast Partner Shims - Pair

Optiparts Mast Extender, 40cm

Optiparts Mast Extender, 10cm

Optiparts Mast, upgraded club

catamaran boat double decker

• 0 No item in your cart
• SUBSCRIPTION
• Classified Ads
• Technical Specifications
• Destinations
• Address book

• All the magazines

SUNREEF 88 DOUBLE DECK: A catamaran designed for ultimate comfort!

680 m² of canvas downwind, 460 m² upwind, the Sunreef 88 DD is a real sailboat making 7 knots in just 10 knots of wind

The 88 DD is an imposing catamaran with an air draft of over 40 meters... Welcome to the outsized world of superyachts!

The sheer of the deck makes it possible to house a jet-ski on the sidedeck while maintaining good headroom in the cabins...

On the flybridge, behind the helm station, you find all the indispensable features for relaxation: sunbathing, barbecue, bar and a magnificent 35m² of space

The helm station located on the flybridge allows for handling everything on the entire cat while offering an ideal view of the water.

The aft cockpit encircled by loungers is very large. The skipper's cabin is hidden under the bench seat of the big table. Beneath the stairway, there is access to the day toilets without having to go through the interior of the boat

The Sunreef 88 DD hasn’t forgotten any of the rules of super-yachting. Attention to detail and refinement is everywhere on board, making life enjoyable

The cockpit interior offers a good view forward across the water. From here, you can handle the boat while staying warm during night watches.

The owner's cabin occupies the entire forward part of the coachroof and offers a 180° panoramic view. It has a large bench seat / bunk bed for when the children want to join their parents, and the bathroom is located in the hull. Superb!

The galley is professionally equipped and offers really impressive storage space. A wine cellar and large freezers find their place in the cargo hold under the floor

The guest cabins are just as beautiful

Practical info

• Builder : SUNREEF YACHTS
• Technical specifications
• Finance your Sunreef 88 Double Deck
• Articles about the Sunreef 88 Double Deck
• Available in issue # 158

Boat Test price $5.00 Inc. tax

Add several tests to your cart

and get an extra discount!

With their new 88  footer from the Double Deck range, Sunreef are unveiling an ultra-comfortable cruising catamaran built for an experienced boating family, and are confirming their ability to complete fully customized projects on the same timescale as production boats.

It took no more than 9 months for the Sunreef 88 DD, first announced at the 2016 Cannes boat show, to see its hulls hit the water in Gdansk, Poland.  Yet this is not just a well-honed semi-custom boat, but a brand new model in the range which is already known to connoisseurs and necessarily demanding owners. Having owned many of the best in English and Italian motor yachts, this family got into sailing with a beautiful 25 meter ketch.  The natural instability of a heeling monohull prompted them to ask Ian Sellers, their skipper, to think of another solution.  The choice of a sailing catamaran was a logical one: the space, stability, low draft, panoramic view and the economical running are irrefutable arguments for those who want XXL-sized comfort.  

A good average speed to cross the Atlantic or to reach new anchorages in the Caribbean islands after a beautiful summer season in the Mediterranean also guided their choice.  It simply remained to find a shipyard capable of satisfying the wishes of the owner.  With a budget of more than 4 million euros, this owner was looking for a boat that was not just ultra-equipped and of the highest quality, but a unit that was entirely made ...

To read in full, Buy the boat test

What readers think.

Post a comment

No comments to show.

Share this article

Follow us on, vous avez ajouté " " à vos favoris., vous avez supprimé " " de vos favoris., in order to add this article to your favorites, please sign in..

• Green Propulsion
• Renewable Energy
• Energy efficiency
• Sustainable materials
• News & Events
• Sunreef News Magazine
• Press About Sunreef

• 60 Sunreef Power
• 70 Sunreef Power
• 80 Sunreef Power
• 100 Sunreef Power
• Sunreef Supreme Power
• Sunreef Ultima Range
• Sunreef 44 Ultima
• Sunreef 55 Ultima
• Sunreef 66 Ultima
• Sunreef 77 Ultima
• Sunreef 88 Ultima
• Sunreef fleet

• Sunreef Zero Cat
• Sunreef 100 Eco
• Sunreef Fleet

• Sunreef 43M
• 49M Sunreef Power
• 210 Sunreef Power Trimaran
• Sunreef Explorer
• 40M Sunreef Explorer
• 40M Sunreef Explorer Eco
• 50M Sunreef Explorer
• Superyachts Fleet

Sunreef 88 Double Deck

• Sustainable

DISCOVER THE MODEL

Description.

The start of the ambitious Sunreef 88 Double Deck project was officially communicated during Sunreef Yachts’ press conference at the Cannes Yachting Festival 2016. After eight months of intensive work, the shipyard proudly announced the launch of this catamaran with a zealous, sporty look.

An experienced yachtsman switching from a massive motor yacht , the owner decided to commission the Sunreef 88 Double Deck to pursue a more stable navigation style with greater living space. Indeed, a challenging project for the shipyard’s engineering and design teams.

Nonetheless, this journey was destined to keep the promise of delivering a state-of-the art fully customized sailing catamaran from the start. To achieve the goal of building a seaworthy and dynamic catamaran, Sunreef Yachts’ team of naval architects conceived a completely new yacht design which seemed far sportier than the rest.

Same as all yachts within her range, the Sunreef 88 Double Deck too features a mezzanine level inside the saloon and a spacious master stateroom with a panoramic view in the bow part of the main deck. However, her superstructure was granted a more aerodynamic aspect. As a result, the 88-footer emphasis equally on both performance and luxury, offering over 300m² of living space and an outstanding sailing experience.

Despite this, the Sunreef 88 Double Deck remains a family-friendly yacht offering the best of comfort and safety. The innovative composite superstructure of the sailing yacht conceals a smart and functional layout with luxurious accommodations for eight guests and up to five crew members.

Upon the owners’ request, the interior decor of the Sunreef 88 Double Deck features exclusive natural materials: Chambord oak, linen, leather, natural stone, and quartz tiles – all contribute to the warm and welcoming atmosphere of the sailing yacht . The feeling of warmth was also achieved through applying numerous orange accents to the interiors – an important color for the owner’s family who consider it to be a symbol of energy.

For comprehensive information and guidance on our products, contact us .

SPECIFICATION

• CLASSIC VERSION

Construction

27 m / 88 Ft

Length overall

Beam overall

245 m² / 2637 Ft²

Water capacity

Sunreef Yachts

385 m² / 4145 Ft²

Fuel capacity

2.30 m / 7.5 Ft

180 m² / 1940 Ft²

Comments are closed.

SUBSCRIBE TO OUR NEWSLETTER

• Sailing Yachts
• Power Yachts
• Superyachts
• Making a Change
• Green Concept
• Energy Efficiency
• Sustainable Materials
• ECO Q&A

Copyright © 2024 Sunreef Yachts . All rights reserved.

• Whistleblowing
• Privacy Policy

Sunreef Venture S.A.

Sunreef Yachts Shipyard

ul. Tarcice 6

80-718 Gdańsk, Poland

+48 58 769 77 77

Launched Sunreef Yacht - Not For Sale:

Sunreef 92 dd (92ft)-vessel summary.

BASIC SUMMARY

Dimensions & specifications, hull and deck configuration, engine details.

• Update Profile
• Email me when price is activated
• Do you own a boat like this? Sell it now

Boat Description

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors to investigate such details as the buyer desired validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. Photos may not properly reflect the current condition of the actual vessel offered for sale. In some cases stock photographs may have been used.

Mechanical Disclaimer

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing.

Dinghy Disclaimer

All dinghies are considered separate vessels and should have separate titles and documents. There is no guarantee as to the title of the dinghy on this vessel so Buyer accepts that while he may receive the dinghy included in the transaction, he may not receive the proper title to it.

• YACHT DESIGN
• YACHT MARKET
• YACHT CLUBS
• YACHT HOTELS
• CHARTER YACHTS
• YACHT SHOWS
• REGATTAS & RACES

YACHT ACCESSORIES

• YACHT APPAREL
• SAILOR GUIDE

• Advertise with Us

New Sunreef 92 Double Deck Sailing Catamaran

From the same people who brought you the original Sunreef Yacht, comes the new Sunreef 92 Double Deck , with a new design which not only streamlines the deck house, but tops it with a giant 40 m 2 fly bridge.

This was inspired by similar designs found on other super yacht designs. In collaboration with K-Epsilon and Rivoyre Ingenierie , The Sunreef Naval Architecture Bureau has intensely studied performance and sea capabilities using state of the art CFD, computational flow dynamics to create the ultimate in catamaran luxury.

Using integrated stepped hull chins, the Sunreef 92 Double Deck catamaran increases interior space, without compromising performance. Now this yacht can accommodate up to 10 guests, in up to 5 double luxury suites, as well as a crew of four.

Sunreef’s 92 Double Deck also features a canoe style boom and carbon mast, one of this manufacturer’s specialties. How are they able to accomplish such feats? They added a new mezzanine floor, which includes a coffee table and lounge, located on the port side of the main deck dining area, freeing up more space below for larger cabins and storage space, or even more suites if you prefer.

Because of this innovative design modification, now the owner’s suite occupies two floors of the entire front area of this yacht, with a private luxury office, gym and leisure area on the upper level, with the bathroom, wardrobe and storage area below deck. Each cabin has an extended size, three way access to their King sized beds, with spectacular panoramic sea views. Not only this, but each luxury suite comes with its own separate bath and shower area, large closets, storage lockers, as well as their own air conditioning and a comprehensive entertainment system.

With a LOA of 27 meters, an 11.2m beam, and a 1.6m draft, this super yacht has a 80 ton displacement. It will also be powered by two 405HP 1200 L/3170 Gal engines, and will be able to cruise at speeds up to 15 knots. The 70m 2 cockpit will also include a large dining area, sunbathing mattresses, and diving equipment. Its spacious fly bridge is fitted with a jacuzzi, two wet bars, barbecue, ice makers and even a pair of jet skis. It will also include a tender, hidden in a specially built locker under the main sun pad of the cockpit.

Even though this is only the second of such models, it isn’t hard to see why the Sunreef 92 Double Deck sailing catamaran is on it’s way to be one of the most sought after luxury yachts. With it’s innovative design, state of the art electronics, and focus on luxury, the Sunreef 92 Double Deck is top of the line, and a must for people who may still think they have it all. Don’t miss out on your own little piece of paradise.

Sunreef 92 Double Deck specification:

Length overall: 27.00 m/88.85ft Beam maximum: 11.20 m/36.60ft Lightship displacement: 80 T Draft maximum (dagger boat): 1.60 m/5.2 ft Mast clearance: 43.20 m/ 142 ft Mast height: 35.40 m/ 116ft Fully battened main sail: 280 m²/3013 ft² Gennaker: 350 m²/3767 ft² Genoa: 160 m²/1722 ft² Solent: 90 m²/ 968 ft² Main engines: 2 x 405 HP Fuel capacity: 12000 L/3170 Gal Water capacity: 2 x 2000 L/2 x 528 Gal Cruising speed on sails: 15 knots Guests : 10 Crew: 3 Naval Architecture/Design/Builder: Sunreef Yachts

Related links: Sunreef Yachts

Foto: sunreef-yachts.com

• Rivoyre Ingenierie
• Sunreef 92 Double Deck
• Sunreef Catamaran

Related Articles

Skia by design storz: unveiling of a 109-meter superyacht concept, introducing the wallywhy100: a marvel of design and performance, sinot’s beach superyacht series: a symphony of luxury, nature, and sustainability, staying afloat: a guide to survival suits for boaters, navigating waters with ease: top 5 dog ramps for your water-loving pup, unleashing comfort and safety: a guide to essential boat accessories for dogs, unwrapping the top 10 best christmas gifts for yacht enthusiasts, docktail butler elite teak table: elevating yachting experiences with elegance and functionality, exploring the abyss: unveiling the powervision powerray wizard underwater drone, seas of sip: captain ladle and the toadfish tumbler tale, sailing the seas of sound: the fusion® apollo™ ms-srx400 marine zone stereo adventure, water exploration with robosea warp10 water scooter.

OceanShaker.com is a treasure chest of information for people who really "dig" yachts. We believe our project will be a real concoction of beautiful yachts, fresh news, ocean winds and, of course, adventures.

Contact us: [email protected]

© Copyright 2023 - Oceanshaker.com

• AIRPORT LOUNGES / AIRPORT SERVICES

• Montego Bay
• Port Antonio
• South Coast
• Treasure Beach

Where To Stay

Things to do.

• WHERE TO EAT
• AIRPORT LOUNGES
• Airlines that fly to jamaica
• PRIVATE TRANSFERS
• Cruise Ship Ports
• Travel Specialists
• Golf Courses

Welcome Messages

Useful information, airport services, wedding and romance.

• Attractions And Tours
• Nightlife & Entertainment
• Golf & Other Sports
• Arts And Culture
• Off the Beaten Path
• Health And Wellness
• Nature Wildlife And Outdoor
• All Inclusive
• Villas & Boutique Hotels
• Business Hotels
• Budget Accommodations
• Lifestyle And Music
• Brand Jamaica
• Jamaican People
• Food Recipes
• Drink Recipes

Jamaica Travel Stories

• Digital Magazine & Newspaper

Jamaica Diaspora

A seafaring adventure on island routes double-decker catamaran cruise.

Embark on a luxury catamaran cruise adventure out of Ocho Rios, Jamaica that takes adventure to new heights.

Standing on the dock, I pause a moment to let my gaze travel slowly upwards at the gleaming catamaran floating before me. Rocking gently in the calm Caribbean Sea, the beautiful double-decker  Calipsoul  seems familiar yet exciting and new to me all at the same time. I had chosen Island Routes Catamaran Dunn’s River Cruise the last time I was in Ocho Rios, Jamaica. It had been the perfect combination of relaxation and excitement that I had been looking for. We had also done the romantic Lovers Rock evening cruise, literally sailing into the sunset together. Making the cruise reservation Both times it had turned out exactly as promised and this time around when I knew I was heading back to Jamaica, I reached out to the wonderfully helpful Island Routes team yet again. I spoke with them about how much I had enjoyed the last catamaran excursion I did with them and shared that this time I would be coming with a group of friends and family of all ages. I had enjoyed the snorkeling aspect of the Dunn’s River cruise so much but it had been fairly short and some of my group said they really wanted to let loose and relax.

Island Routes Reggae Family catamaran cruise They suggested the Island Routes Reggae Family catamaran cruise. They explained that it was like The Dunn’s River cruise minus the climbing, which my mom was happy to hear about, and a lot of time spent exploring the underwater world. Then they told me how great my timing was as they now have a brand new double-decker catamaran! To be honest, I couldn’t quite picture it so I didn’t know what to expect. Standing here, about to step onto the Calipsoul , I am filled with delight as the kids all leap aboard. We aren’t the only family on board that day and as my group is fairly large, coming over on the shuttle service from the Beaches all-inclusive family resort, I had been worried about feeling crowded. Yet, what we discover is the perfect blend of being able to find ample areas for ourselves while also having the opportunity to meet other people as equally excited as we are.

Snorkeling lesson Once in the water, we are directed by the crew, who have joined us, where to swim and, along the way, they make sure to point out coral formations and beautiful fish ensuring we have an amazingly immersive experience (pun intended). I explore for ages and I am very excited as I brought my waterproof camera with me this time and aim to meet my self-imposed challenge of taking an underwater selfie with tropical fish. Although unsuccessful because they move pretty quickly, I still have a blast. Suddenly, someone is tapping me on my shoulder and I pop my head up to see one of the crew members guiding me back to the boat. Making my way back I realize that, as strong a swimmer as I am, I’m pretty happy to have the life vest on as it allows me to keep looking underwater while I make my way back without having to put in too much effort in keeping myself headed in the right direction so all my focus is on the magical world below me. Trampoline for the kids, hammocks for the adults We climb aboard and the teenagers head to the trampoline area (I was told that’s what it’s called). For people who may not normally hang out on a boat, this area serves an engineering purpose but is also a pretty cool place to just hang out on as it’s like a flat stretched-out hammock where you can just lay out and chill. I divest myself of the fins, mask, and vest and realize I’m pretty hungry! Lunch on the ocean Luckily, the food comes out and everyone piles up their plates with tropical fruit, delicious wraps and chips, and salsa, and we head for a sunny spot on the upper deck of the catamaran. We start chatting with other people and decide it’s just about the right time for the rum version of that delicious fruit punch (after all we’re in Jamaica, how can we pass up the delicious rum when no one is driving or diving). My husband opts for a cold Red Stripe instead and leans back to work on his tan. Learning Jamaican dance moves We hear music and a lot of laughter below and realize the trampoline is empty. I decide to leave my husband happily tanning and I follow the music only to discover a full-blown dance class, as the crew is teaching everyone the latest Jamaican dancehall dance moves. Although I feel a little self-conscious when I join in, that quickly fades away as everyone tries their best to match the expertise of the crew. Over on the right, two little girls have their own crew member showing them what to do and they catch on quickly, delighted grins lighting up their faces. I manage to muddle through and I’m pretty sure my sister is going to show these videos to everyone once we get back home for an evening full of a similar level of laughter at my expense. In that moment though, I don’t care. I feel the salt from the sea drying on my skin, my hair is a tousled mess and I’m dancing with my children in the middle of the Caribbean Sea. This, I think, is what happiness is.

Check out the website  for more information on Island Routes' catamaran cruises and other excursions they offer in Jamaica and elsewhere in the Caribbean. They’ll help you to book your perfect adventure today! You can also chat online or call  US Toll-Free: 1.877.768.8370 Toll-Free Caribbean: 1.800.744.1150 International: 1.305.663.4364

Also, read  Take The Driver's East Seat On An Island Routes Mini-Routes Adventure .

Stay tuned for the latest updates and discounts.

Facebook:  @IslandRoutes Instagram:  @IslandRoutes Twitter:  @IslandRoutes

YOU MAY ALSO LIKE

5 scenic drives in Jamaica February 28th, 2017

10 best golf courses in Jamaica March 06th, 2017

10 things to do with kids in Jamaica March 06th, 2017

10 unique experiences in Jamaica March 06th, 2017

Food, Drink And Recipes

Best of Jamaica

Real Estate

Lounge Experience

Cannabis Tourism

Posted by Facebook on  Thursday, August 27, 2015

Unleash Your Inner Mystic

10 best golf courses in Jamaica

‘Wha' gwaan goodie’ - a guide to Jamaican greetings

© 2019 Jamaica Experiences All Rights Reserved

The global authority in superyachting

• NEWSLETTERS
• Yachts Home
• The Superyacht Directory
• Yacht Reports
• Brokerage News
• The largest yachts in the world
• The Register
• Yacht Advice
• Yacht Design
• 12m to 24m yachts
• Monaco Yacht Show
• Builder Directory
• Designer Directory
• Interior Design Directory
• Naval Architect Directory
• Yachts for sale home
• Motor yachts
• Sailing yachts
• Explorer yachts
• Classic yachts
• Sale Broker Directory
• Charter Home
• Yachts for Charter
• Charter Destinations
• Charter Broker Directory
• Destinations Home
• Mediterranean
• South Pacific
• Rest of the World
• Boat Life Home
• Owners' Experiences
• Interiors Suppliers
• Owners' Club
• Captains' Club
• BOAT Showcase
• Boat Presents
• Events Home
• World Superyacht Awards
• Superyacht Design Festival
• Design and Innovation Awards
• Young Designer of the Year Award
• Artistry and Craft Awards
• Explorer Yachts Summit
• Ocean Talks
• The Ocean Awards
• BOAT Connect
• Between the bays
• Golf Invitational
• Boat Pro Home
• Pricing Plan
• Superyacht Insight
• Product Features
• Premium Content
• Testimonials
• Global Order Book
• Tenders & Equipment

First Sunreef 88 double deck catamaran launched

The first hull in the Sunreef 88 range of double deck sailing catamarans has been launched in Gdansk for a European owner, the Polish yard has announced.

This fully personalised multihull superyacht measures 26.82 metres LOA and was styled inside and out by the in-house team at  Sunreef Yachts .

In a statement, the Polish yard added that the design of the Sunreef 88 is “a great display of the shipyard’s non-conformist attitude and a genuine example of an avant-garde sailing catamaran concept”.

Captain Ian Sellers added: "She is a beautifully crafted, fully customised transoceanic catamaran, with superb quality and finish."

The design brief was focussed on three key themes: luxury, performance and privacy. To this end, the Sunreef 88 features more than 300 square metres of living space — an impressive figure for a yacht of this size, proving that bigger isn't always better .

This two-deck sailing yacht will feature an extensive flybridge with a central helm station and plenty of al fresco dining and relaxation spaces. Back aft, the cockpit features a central dining table with seating space for ten guests as well as a second sunbed, making good use of the Sunreef 88's 11.2 metre beam.

The in-house design includes sporty and dynamic exterior lines, as well as a fully customised interior layout. Key features include a mezzanine level in the saloon and a main-deck owner's cabin , which boasts superb views out to sea through panoramic windows.

Auxiliary power comes from a pair of 425hp engines drawing on a total fuel capacity of 8,000 litres, while her total sailplan is in excess of 345 square metres.

Sunreef added that the designers drew inspiration for this single-masted sailing yacht from the 35 metre flagship yacht Che , which was launched in 2010. The Sunreef 88 is the sixth superyacht from the Polish yard, which has also created the Sunreef 102 yacht Ipharra .

Similar yachts for sale

More stories, most popular, from our partners, sponsored listings.

36 double-decker catamaran

Alexandra resort beach, up to 25 passengers, from $1,680.00, boat details, 32 double-decker catamaran, 'what is included'.

 All Your Gear (Fins, Mask, Vest), Beer, Rum Punch, Soft Drinks, Water, Grilled Fish, Gourmet Sandwiches (Half Day), Grilled Chicken (Full Day), Corn on the Cob (Full Day), Grilled Garlic Bread (Full Day), Peas & Rice (Full Day), Light Snacks

'Add-On Options'

Lobster (in season): $30/lb, Charcuterie: Small $70, Medium $120, Large $160, 

Tubing: $50 Fishing: $350 + 12 fishing license for guests 16+ years old, 

Veuve Clicquot Champagne: $150

'What To Bring'

Reef Safe Sunscreen, Towel, Your own reusable cup

Ice, Soda, Water : Please Check Description

Boat category : Pontoon, Catamaran

Meeting Point : The beach at The Alexandra Resort, just behind the front reception building.

Local Pick Up : Complimentary pick ups are available in the Grace Bay and Leeward areas only.

Food/Snacks : Please Check Description

Paddleboards : No

Specifications

Length : 32

Passenger Capacity : 25

Crew Capacity : 4

Sleep Capacity : 0

Year Built : 2015

Fuel Capacity : 350

Booking options

Boat location.

• How It Works
• About Boatsetter

Popular Regions

• Ibiza , Spain
• Barcelona , Spain
• Cancún , Mexico
• See all regions

DEK KAT 2680

Dek kat 2680 model.

Meet the new standard in nearshore and offshore coastal high-performance catamaran deck boats. With it’s revolutionary twin tunnel hull design, the Dek Kat 2680 is changing the game for inshore fishing by providing a large, stable fishing platform without sacrificing creature comfort options for the family.

BETTER FEATURES

With ample in deck storage, minimal bow rise on acceleration coupled with a shallow water draft of approximately 12”, the Dek Kat is fast becoming an in-shore guide favorite. At 26’ 2” inches long with a beam of 8’6” there is no other bay boat on the market that comes close to her deck space. The twin tunnels provide a stable and comfortable ride even when the weather is not fully cooperative.

If live bait fishing is your game, the 2680 comes standard with two large in deck live/release wells with the option for additional live wells above deck in the forward seating or in our custom leaning post configuration.

MORE COMFORT

The Dek Kat 2680 is a semi-custom built boat which is just as comfortable on the bay waters chasing trout and redfish as it is at the sand bar with your family. Our oversized hard tops keep the family comfortable with the shade and you will find an abundance of seating throughout the boat, including our custom Adirondack style seat built into the console. Built for fishing and comfort cruising, the Dek Kat is truly one of the most versatile bay boat designs out there. It is ready for whatever your weekend desires are upon the water.

BUILD YOUR DEK KAT

352-541-2800.

Email [email protected] Sales 352-222-7202

STAY IN TOUCH

Join our mailing list to stay up to date with our latest announcements!

• Accessibility Statement

COPYRIGHT 2024 © ALL RIGHTS RESERVED.

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• Deck Boat Catamaran

Deck Boat Catamaran Boats for sale

1-15 of 360

2005 Glacier Bay 2680 Coastal Runner

Palmetto, Florida

Make Glacier Bay

Model 2680 Coastal Runner

Category Power Catamaran Boats

Posted 2 Weeks Ago

This Glacier Bay is in good condition for her age. The seller just had the boat detailed and has a nice hull shine. The hull sides have a nice shine and are free from any major defects. The interior is clean and the electronics have been updated. The cabin is clean and ready for a new owner! Stock #388699 Power Catamaran! Offshore Ready! Just Detailed! Engines Run Great!! 2005 Glacier Bay 2680 Coastal Runner This is a nice power catamaran design with quality construction by Glacier Bay. This Coastal Runner features an interior cabin with room for two to sleep very comfortably and a plumbed head. The dual hull design with its wide beam, and high gunwales creates the perfect combination for a dry, stable ride, even in rough sea days. The cockpit features a wrap-around windshield and side windows with a hardtop overhead with two opening ports. The rear deck area has coaming pads for comfort, a huge live well and access to the integrated swim platform. There are plenty of rod holders and two fish boxes are in the floor. This design allows you to walk around the sides to the bow with handrails. The electronics were recently updated. There is a Garmin GPSMAPS 8612 xsv series 12" touchscreen IPS multifunction display chartplotter-sonar combo with BlueChart G3 and Lakeview G3. A Garmin GT56UHD-TM Traditional CHIRP High wide / UHD Clear-side transducer. A Garmin GMR Fantom 24x White 50 watt Solid State Radar, 60 RPM, 8 Bit Color, Dual Range, Overlay Support, and a Garmin Reactor 40 Hydraulic Corepack with SmartPump with GHC 50 Autopilot that has not been installed yet. Check out all the photos and call today to make it yours! Reason for selling is buying another boat.

Santa Barbara, California

Posted Over 1 Month

Trailerable 34' catamaran. Demountable. Sets up in 1.75 hours. 34 LOA beam 20 mast 45' from water. This is a very fast cat with no light air problems at all. Brand new sails, sleeping in the hulls. Wave piercing bows. great galvanized trailer. Packs down to 8' wide for the road or shipping container. serious buyers only please. Asking 49k O.B.O. Here is the inventory list. This is quite possibly one of the finest custom Stilettos on earth. . Deluxe trailer. Quick set up. Racer / cruiser. Custom sleeping births in each hull. Professionally reconditioned to "like new" condition in 2005. structural glassed in bed frames with extra floatation, upsized sea hatches, Lewmar winches. 20' beam and transforms into 8' wide for trailering or fit into a shipping container and ship over seas. Set up to single hand. Room for plenty of friends or the whole family. She is wicked fast, handles like a dream with a light helm that is quick and responsive. This cat was originaly a "Stiletto 27" we added a 3' stern extention kit and a wave piercing bow off the Oracle pattern making it a full 34 feet. Length overall 34' Length at water line 34' beam 20' mast hieght from water line 45' Inventory: 12 volt gel cell. 2 Colligo endless line furliers with endless fid lines. 15 hp Mercury motor. starts and runs perfect. VHF radio with stern mounted antenna. Sony Marine AM/FM CD. Marine grade electronic panel with futures 3 12 volt charge adapters New autohelm with custom bracket Rear net/tramp from the webbing material of the big cat "Double Bullets" Two Openable port lights interior forward bow Custom Pro built mast rotator stainless differential Colligo line organizers Four Halyard clutches mast mounted Beautiful new custom centerboard. Garmin GPS Hull mounted GPS antenna. "SPOT" rescue system New gas tank. Galvanized trailer. twin axle New hevey duty hitch Custom built in sink and cabinets with fresh water tank New deluxe Porta Potti Two deck mounted anchor lockers Custom white marine grade cushions in almost new condition. 2 sets of oars new 6 new life jackets in the case. Main sail is full roach glass battens only used a couple times. w/ lazy jacks. Screecher used once. Brand new jib in the bag Second jib. Mylar very used but a lot of sailing left in it. Galvanized trailer with set of removable magnetic lighting. Custom aluminum motor mount Brand new all synthetic rigging . S.E. model with side windows at the head of the births. (Lexan) New Lexan canopies Glass high performance rudders. Two Adjustable tiller handles with shovel grips Center dagger board was custom made ( glass ) high performance foil aprox. 6' tall and its beautiful. New fire extinguisher, tool kit, compass, shade cockpit cover, big anchor with 30 feet of chain and a lot of rode, lots of extra lines and frankly I can't remember all thats in my boat so just come see it. lots of misc. This Catamaran is ready to trailer and sail right now. A ton of money and careful attention has been poured into this boat, Many more extras and lots of photos to serious qualified buyers only please. Shipping can easily be arranged. 49,000 U.S. Dollars

1999 Catamaran Berkstresser Boats 60

Clearwater, Florida

Make Catamaran

Model Berkstresser Boats 60

1999 Catamaran Berkstresser Boats 60 A 60 foot world cruiser, live aboard and term charter sailing catamaran that is fast, long, light, comfortable, efficient and easy to sail (single hand). Low maintenance design provides a safe and unsinkable vessel. Many windows, ports and hatches provide a lite, open and airy interior. Lots of locker space provides storage for gear and toys (dive gear, windsurf, kite and surfboards). Large aft deck for allows ease of setup for tender operation and setting up water toys. Large swim platform and swim steps provides for easy water access. This world cruiser, live aboard or term charter sailing catamaran provide accommodations for 1 to 10 persons in 4 cabins with queen size beds, private heads and showers and two separate crew cabins with single beds and lots of storage. Excellent opportunity exist for new owners to add to an existing fleet or to startup a new business. A real money maker with prior weekly BVI bookings in the $16,000-$22,000 range depending on the dates. Out-of-State buyers can now buy and use their boat in beautiful Florida for 180 days with No Florida Sales Tax! Ask your EYS broker for details.

1987 Catamaran Hortsman 34'

Miami, Florida

Model Hortsman 34'

1987 Catamaran Hortsman 34' 34 1987 CATAMARAN HORTSMAN ONLY 70 HOURS PRACTICALLY BRAND NEW 2014 30HP HONDA   UPGRADED ENGINE MOUNT   AUTO PILOT 2017 SIMRAD GO 7XE CHART PLOTTER WITH SIDEVIEW SONAR 2, 40 GALLON FRESH WATER TANKS SOLAR PANELS UHF RADIO BRAND NEW CUSTOM BENCH BRAND NEW TOPSIDE DECK PAINTED SEA ANCHOR PARACHUTE SYSTEM HEAVY DUTY FRONT ANCHOR AND REAR ANCHOR LED LIGHTING AND TONS OF OTHER ACCESSORIES THAT WILL GO WITH THE BOAT There a ton of extras. We just upgraded everything just about for some blue water traveling. You really need nothing else to do to her. She is turn key at this moment. Financing available if needed.

2016 Eternal Boats 28 Catamaran Deck Boat

Dunedin, Florida

Make Eternal Boats

Model 28 Catamaran Deck Boat

Category Deck Boats

2016 Eternal Boats 28 Catamaran Deck Boat Be sure to check out the above video highlighting key features of the boat! America's First True High Performance Catamaran Hull with Deck boat platform. Ladder with shower in front, Eternal door in front, Deck boat seating with plenty of storage underneath.  2 designated cooler areas. Standup porcelain head with electric flush, carbon fiber vanity with sink and shower. Under helm, double helm seat with flip up holster. Touch screen Garmin GPS with 2 digital gauges. All doors are backlit in blue.  Under water blue courtesy lights. Back off the boat enhanced with play pen area which electrically raises to reveal additional storage.  2 ladders in the back with shower 1 ladder in front.

Category Powerboats

2016 Eternal Boats 28 Catamaran Deck Boat America's First True High Performance Catamaran Hull with Deck boat platform. Ladder with shower in front, Eternal door in front, Deck boat seating with plenty of storage underneath.  2 designated cooler areas. Standup porcelain head with electric flush, carbon fiber vanity with sink and shower. Under helm, double helm seat with flip up holster. Touch screen Garmin GPS with 2 digital gauges. All doors are backlit in blue.  Under water blue courtesy lights. Back off the boat enhanced with play pen area which electrically raises to reveal additional storage.  2 ladders in the back with shower 1 ladder in front.

2012 Catamaran Cruisers Custom House Boat

Flower Mound, Texas

Make Catamaran Cruisers

Model Custom House Boat

Category Cruiser Boats

2012 Catamaran Cruisers Custom House Boat GREAT LIVE-A-BOARD!FRESHWATER USE ONLY!YAMAHA 115 FOUR STROKE! ONLY 48 HOURS!AIR CONDITIONING!GENERATOR!This VERY clean 39' x 12' custom houseboat is powered by a fuel efficient Yamaha 115hp four stroke outboard motor with only 48 hours.  Wonderful light and bright layout with private stateroom, full galley and large head.  Other features include large front and aft covered decks, docking lights, 30 amp shore power, rear & upper deck camera with monitor, depth finder, factory installed generator, roof top air conditioning, 2 flat panel TV's, High Powered Kenwood sound system with multiple speakers including six JL Audio bullet speakers outside and 3 amps, large dinette, sofa sleeper, hot water, stove, M/W, full size frost free refrigerator, private master stateroom with privacy door, large head with marine toilet and huge stall shower, lots of storage space, huge upper deck with custom made aluminum party top canopy and shade screens, fans, large flat screen TV and more.  This would make a great live-a-board or weekend cruiser.  NO TRAILER!  All photos and videos shot October 1, 2016.Located on Lake Lewisville and turn-key ready for use!

1987 Horstman Catamaran

Palm Beach Gardens, Florida

Make Horstman

Model Catamaran

Category Catamarans

1987 Horstman Catamaran Selling my beautiful sailing Catamaran. She is a 34 ft Hortsman. Built solid from wood and fiberglass. She will not sink. Great for a live aboard or just checking out beautiful places. There a ton of extras. We just upgraded everything just about for some blue water traveling. You really need nothing else to do to her. She is turn key at this moment. Comes with:3 SailsPractically brand new 2014 30hp HondaUpgraded engine mountAuto pilot2017 Simrad Go 7xe Chart plotter with sideview sonar 2016 Generator 2, 40 gallon fresh water tanks Solar panelsUHF radioBrand new custom benchBrand new topside deck paintedSea anchor parachute systemHeavy duty front anchor and rear anchorLED LightingAnd tons of other accessories that will go with the boatCall me at 904-Seven-Zero-Three-8273

2002 Custom Catamaran

Raceland, Louisiana

Make Custom

Category Houseboats

2002 Custom Catamaran, Comfort on the water doesn't get much better!!!Introducing this 2002 Custom 52ft Catamaran Houseboat "On Vacation" manufactured by Louisiana Houseboats Inc. This 2 bedroom, 2 bath floating home has all the convenience of a fully furnished condominium with the capabilities to change your residency with the crank of an engine. The fully fiberglass hull is powered by twin 250 Yamaha outboards keeping engine maintenance low. The interior was newly refurbished for 2016 with new carpet throughout the boat as well as a new stack Whirlpool washer and dryer in the master. The 2nd story sundeck with fiberglass top features sofa style seating across the bow, with the entire deck being open to the stern maximizing the total area above. Why settle for a vacation home in one location when you can travel the coast without leaving the comfort of your living room sofa?Highlighted Features Include:-2 Bedrooms 2 Bath-New Carpet throughout the boat-New Stack Whirlpool Washer and Dryer-Fully Furnished Living room and Kitchen-Electric Cooktop stove, Oven & Microwave-Full size Refrigerator-Twin Yamaha 250 outboards (2006 model year)-600 gallon Fuel Capacity-600 gallon Fresh Water tank-Onboard Sewage treatment plant-23kw Isuzu Generator-2 50 amp shore power outlets (boats runs on 1)- Fresh water line hookup-Bose Sound system (top deck)**Boat is located in Louisiana on open waterways, No landlock transportation cost** $170000.00

Leisure Cat 26 Catamaran Deck Boat with Trailer

Naples, Florida

Model Leisure Cat 26

Length 26.0

Leisure Cat 26 Catamaran Deck Boat with Trailer. Anchor & line, large bimini top, aft swim ladder, full cover, seat cushions, fresh water shower, and full lighted gauges. Power: 1998 225 HP Mercury outboard motor - serviced this year and runs perfectly. 2 new batteries and internal battery charger. 80 gallon fuel tank. Max capacity of 12 passengers. 2013 Bear Tritoon Trailer. Holds 24 to 26 foot Tritoon. Model PB 13-26TTL. 2 axles with drum brakes, adjustable rails, and in great condition.

1998 New Orleans Catamaran House Boat

Wilmington, North Carolina

Make New Orleans

Model Catamaran House Boat

Category Power Catamarans

1998 New Orleans Catamaran House Boat Huge cruising home with trawler economy.  With her 2002 straight inboard, prop protected 310hp cummins diesels.  This three stateroom two head floating home has it all, from her upper and lower steering stations to her forward and aft decks and her massive upper deck for entertaining!!!  Also available is the waterfront non-buildable lot w/90'x60' T-dock for $150K.  Owner will give the buyer of the boat 6 months free dockage or will finance the sell of the land and dock.

1991 Sea taxi Custom Catamaran Dive Boat

Fort Lauderdale, Florida

Make Sea Taxi

Model Custom Catamaran Dive Boat

1991 Sea taxi Custom Catamaran Dive Boat The Makai is 46 ft long 16ft wide 2-deck power catamaran. It is USCG inspected for 84 passengers. It has been used for sight seeing tours, snorkeling and scuba tours, sunset cruises, whale watching, private events and tendering for cruises ships, private yachts and the military.The vessel has 2 restrooms, fresh water shower, concessions bar, dive/swim ladder and upper deck lounge with cushioned seating. It just completed its bi-annual dry dock an annual inspection. Its hulls are solid fiberglass with glass over wood wing. Registered Dimensions: 46' x 16.4' x 5.2' Tonnage: 11 Gross / 8 Net Type/Trade: Twin Diesel Catamaran / USCG Passenger-Inspected, Coastwise Built in 1991 Opa Locka, Florida and re-powered in 2005. ADDITIONAL PERMIT AVAILABLE FOR PURCHASE: State of Hawaii commercial permit and mooring permit. This permit allows commercial operation from the Kailua Kona Hawaii pier in the heart of Kona. This pier is Kona’s cruise ship port which sees weekly cruise ship visitations. These permits are limited by the State of Hawaii.

2012 Catamaran Coaches Trimaran

Make Catamaran Coaches

Model Trimaran

2012 Catamaran Coaches Trimaran PRICE REDUCTION! Want the most awesome deck boat ? Or are you thinking about launching a wildlife-watching, sea-touring, flats-fishing, kayaking, paddle-boarding or water yoga and shelling excursion business? THIS IS THE BOAT FOR YOU Custom composite and aluminum-railed 26-foot trimaran draws only 18 inches Two battery banks and an inverter power it all Great sound system Dance on the top deck or store kayaks and paddle boards there Lowrance chart plotter, VHF, live wells, wash down pump & filet table Ready for family fun or create your own business. Custom seating and a private head for your comfort Recent bottom paint No slip fees because a heavy-duty tri-axle aluminum trailer is included.  Powered by a low-time (600 hours) Yamaha F350, this Florida-manufactured custom trimaran is strong, fast and reliable. Arrange a showing today.

Narrow Results

Current search reset all.

• Keyword: deck boat catamaran
• Wellcraft (19)
• Glacier Bay (11)
• Twin Vee (7)
• Glastron (5)
• Robertson And Caine (5)
• Sea Fox (5)
• Catamaran Cruisers (4)
• Fountaine Pajot (4)
• World Cat (4)
• Catamaran (3)
• 2 Criag Cats, 2 Mini Speed Boats,2 Jet Skis (2)
• Bayliner (2)
• CATAMARAN CRUISER (2)
• COBALT BOATS (2)
• Carolina Skiff (2)
• Catamaran Coaches (2)
• Catamaran Cruiser (2)
• Eternal Boats (2)
• Hysucat (2)
• Probio Plastic Boat (2)
• Sea Cat (2)
• Seawind (2)
• Splendor (2)
• 33rd Strike Group (1)
• 33rd Strike Group Power Catamaran (1)
• Advantage (1)
• Armadia (1)
• Barracuda (1)
• Beachcat (1)
• BoatYard (1)
• Carolina Cat (1)
• Chaparral (1)
• Desert Shore Yachts (1)
• Destination (1)
• Eliminator (1)
• Eric Lerouge (1)
• Force Engineering (1)
• Four Winns (1)
• GLACIER BAY (1)
• Glacier Bay* (1)
• Gulf Coast (1)
• H2X Custom (1)
• Hobie Cat (1)
• Horstman (1)
• Island Hopper (1)
• Island Packet (1)
• Lightning Power Boats (1)
• Mowdy Boats (1)
• New Orleans (1)
• OFFSHORE CATAMARANS (1)
• Ocean Cat (1)
• Pedigree (1)
• Perfection Boats (1)
• Pro Sports (1)
• Robertson & Caine (1)
• Sea Taxi (1)
• Shoalwater (1)
• Shuttleworth (1)
• Solaris (1)
• Sport Cat (1)
• Sportcraft (1)
• WorldCat (1)
• Catamarans (17)
• Power Catamarans (17)
• Sport Fishing Boats (11)
• Power Catamaran Boats (9)
• Powerboats (8)
• Center Consoles (7)
• Deck Boats (7)
• Houseboats (7)
• Sailboats (6)
• Bowrider Boats (5)
• Cruiser Boats (5)
• Bay Boats (4)
• Dual Console Boats (4)
• Fishing Boats (4)
• Center Console Boats (3)
• Racer Boats (3)
• Saltwater Fishing Boats (3)
• Catamaran Sailboats (2)
• Tender Boats (2)
• Aft Cabin (1)
• Aluminum Fishing Boats (1)
• Cuddy Cabin Boats (1)
• Flats Boats (1)
• Inflatable Boats (1)
• Motor Yachts (1)
• Pilothouse Boats (1)
• Pontoon Boats (1)
• Skiff Boats (1)
• Small Boats (1)
• Trawler Boats (1)
• Walkarounds (1)
• Florida (267)
• California (9)
• New York (8)
• Tennessee (7)
• North Carolina (6)
• Washington (6)
• Maryland (5)
• Connecticut (3)
• New Jersey (3)
• South Carolina (3)
• Virginia (3)
• British Columbia (2)
• England (2)
• Georgia (2)
• Illinois (2)
• Louisiana (2)
• Minnesota (2)
• West Virginia (2)
• Colorado (1)
• District Of Columbia (1)
• Eastern Cape (1)
• Kentucky (1)
• Massachusetts (1)
• Michigan (1)
• Mississippi (1)
• Provence-Alpes-Cote D'Azur (1)
• POP Yachts (9)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

2003 Harbor Master 520 Wide Body

Lecanto, FL

1998 ShoreLand'r LEB46TCBL

2006 Boston Whaler 150 Montauk

Chenequa, WI

2004 Sea Ray 270 Sundeck

Phoenix, AZ

2016 Malibu Wakesetter 22 MXZ

Browns Summit, NC

2004 Sea Ray 260 Sundancer

University of Richmond, VA

2010 Tige Z1

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

• 1-855-932-1711
• My Account Hello Credits My Account Log out

Catamaran Sightseeing Cruise: Sea, Salt & Klein Bonaire

Kralendijk, Bonaire

Activity Level

Excursion Type

Local Sightseeing,25,All

Wheelchair Accessible

Starting At

Minimum Age

Information Not Currently Available

Approximately 2 Hours

Meals Included

Meals not included

Savor Bonaire's breathtaking seascapes from the Sea Breeze double-decker power catamaran .

You'll stop at the famous pink salt flats and white mountains of salt. Your guide will explain the salt production process.

Offshore from the historical white slave huts, learn some Caribbean facts and discover why these centuries-old huts are built next to the sea.

The catamaran approaches the uninhabited island of Klein Bonaire by way of the famous Bonaire Marine Park . Its protected reef makes it a divers' paradise. From up close, you will see Bonaire's most attractive white-sand beach. Its name, of course, is No-Name Beach.

Follow the coastline for exceptional panoramic views, and don't forget to look down into the crystal-clear turquoise water. Oceanfront hotels and restaurants and beautiful Dutch Caribbean mansions line the way back to the port.

Maximum age is 70 years. Maximum height is 6'6". Maximum weight is 330 lbs. Guests who are more than five months pregnant or have a heart condition, asthma, or leg or chest injuries and/or recent surgery are not allowed to participate. Not advisable for guests with mobility limitations.

• Popular Professionals
• Design & Planning
• Construction & Renovation
• Finishes & Fixtures
• Landscaping & Outdoor
• Systems & Appliances
• Interior Designers & Decorators
• Architects & Building Designers
• Design-Build Firms
• Kitchen & Bathroom Designers
• General Contractors
• Kitchen & Bathroom Remodelers
• Home Builders
• Roofing & Gutters
• Cabinets & Cabinetry
• Tile & Stone
• Hardwood Flooring Dealers
• Landscape Contractors
• Landscape Architects & Landscape Designers
• Home Stagers
• Swimming Pool Builders
• Lighting Designers and Suppliers
• 3D Rendering
• Sustainable Design
• Basement Design
• Architectural Design
• Universal Design
• Energy-Efficient Homes
• Multigenerational Homes
• House Plans
• Home Remodeling
• Home Additions
• Green Building
• Garage Building
• New Home Construction
• Basement Remodeling
• Stair & Railing Contractors
• Cabinetry & Cabinet Makers
• Roofing & Gutter Contractors
• Window Contractors
• Exterior & Siding Contractors
• Carpet Contractors
• Carpet Installation
• Flooring Contractors
• Wood Floor Refinishing
• Tile Installation
• Custom Countertops
• Quartz Countertops
• Cabinet Refinishing
• Custom Bathroom Vanities
• Finish Carpentry
• Cabinet Repair
• Custom Windows
• Window Treatment Services
• Window Repair
• Fireplace Contractors
• Paint & Wall Covering Dealers
• Door Contractors
• Glass & Shower Door Contractors
• Landscape Construction
• Land Clearing
• Garden & Landscape Supplies
• Deck & Patio Builders
• Deck Repair
• Patio Design
• Stone, Pavers, & Concrete
• Paver Installation
• Driveway & Paving Contractors
• Driveway Repair
• Asphalt Paving
• Garage Door Repair
• Fence Contractors
• Fence Installation
• Gate Repair
• Pergola Construction
• Spa & Pool Maintenance
• Swimming Pool Contractors
• Hot Tub Installation
• HVAC Contractors
• Electricians
• Appliance Services
• Solar Energy Contractors
• Outdoor Lighting Installation
• Landscape Lighting Installation
• Outdoor Lighting & Audio/Visual Specialists
• Home Theater & Home Automation Services
• Handyman Services
• Closet Designers
• Professional Organizers
• Furniture & Accessories Retailers
• Furniture Repair & Upholstery Services
• Specialty Contractors
• Color Consulting
• Wine Cellar Designers & Builders
• Home Inspection
• Custom Artists
• Columbus, OH Painters
• New York City, NY Landscapers
• San Diego, CA Bathroom Remodelers
• Minneapolis, MN Architects
• Portland, OR Tile Installers
• Kansas City, MO Flooring Contractors
• Denver, CO Countertop Installers
• San Francisco, CA New Home Builders
• Rugs & Decor
• Home Improvement
• Kitchen & Tabletop
• Bathroom Vanities
• Bathroom Vanity Lighting
• Bathroom Mirrors
• Bathroom Fixtures
• Nightstands & Bedside Tables
• Kitchen & Dining
• Bar Stools & Counter Stools
• Dining Chairs
• Dining Tables
• Buffets and Sideboards
• Kitchen Fixtures
• Wall Mirrors
• Living Room
• Armchairs & Accent Chairs
• Coffee & Accent Tables
• Sofas & Sectionals
• Media Storage
• Patio & Outdoor Furniture
• Outdoor Lighting
• Ceiling Lighting
• Chandeliers
• Pendant Lighting
• Wall Sconces
• Desks & Hutches
• Office Chairs
• View All Products
• Side & End Tables
• Console Tables
• Living Room Sets
• Chaise Lounges
• Ottomans & Poufs
• Bedroom Furniture
• Nightstands
• Bedroom Sets
• Dining Room Sets
• Sideboards & Buffets
• File Cabinets
• Room Dividers
• Furniture Sale
• Trending in Furniture
• View All Furniture
• Bath Vanities
• Single Vanities
• Double Vanities
• Small Vanities
• Transitional Vanities
• Modern Vanities
• Houzz Curated Vanities
• Best Selling Vanities
• Bathroom Vanity Mirrors
• Medicine Cabinets
• Bathroom Faucets
• Bathroom Sinks
• Shower Doors
• Showerheads & Body Sprays
• Bathroom Accessories
• Bathroom Storage
• Trending in Bath
• View All Bath
• How to Choose a Bathroom Vanity

• Patio Furniture
• Outdoor Dining Furniture
• Outdoor Lounge Furniture
• Outdoor Chairs
• Adirondack Chairs
• Outdoor Bar Furniture
• Outdoor Benches
• Wall Lights & Sconces
• Outdoor Flush-Mounts
• Landscape Lighting
• Outdoor Flood & Spot Lights
• Outdoor Decor
• Outdoor Rugs
• Outdoor Cushions & Pillows
• Patio Umbrellas
• Lawn & Garden
• Garden Statues & Yard Art
• Planters & Pots
• Outdoor Sale
• Trending in Outdoor
• View All Outdoor
• 8 x 10 Rugs
• 9 x 12 Rugs
• Hall & Stair Runners
• Home Decor & Accents
• Pillows & Throws
• Decorative Storage
• Faux Florals
• Wall Panels
• Window Treatments
• Curtain Rods
• Blackout Curtains
• Blinds & Shades
• Rugs & Decor Sale
• Trending in Rugs & Decor
• View All Rugs & Decor
• Pendant Lights
• Flush-Mounts
• Ceiling Fans
• Track Lighting
• Wall Lighting
• Swing Arm Wall Lights
• Display Lighting
• Table Lamps
• Floor Lamps
• Lamp Shades
• Lighting Sale
• Trending in Lighting
• View All Lighting
• Bathroom Remodel
• Kitchen Remodel
• Kitchen Faucets
• Kitchen Sinks
• Major Kitchen Appliances
• Cabinet Hardware
• Backsplash Tile
• Mosaic Tile
• Wall & Floor Tile
• Accent, Trim & Border Tile
• Whole House Remodel
• Heating & Cooling
• Building Materials
• Front Doors
• Interior Doors
• Home Improvement Sale
• Trending in Home Improvement
• View All Home Improvement
• Cups & Glassware
• Kitchen & Table Linens
• Kitchen Storage and Org
• Kitchen Islands & Carts
• Food Containers & Canisters
• Pantry & Cabinet Organizers
• Kitchen Appliances
• Gas & Electric Ranges
• Range Hoods & Vents
• Beer & Wine Refrigerators
• Small Kitchen Appliances
• Cookware & Bakeware
• Tools & Gadgets
• Kitchen & Tabletop Sale
• Trending in Kitchen & Tabletop
• View All Kitchen & Tabletop
• Storage & Organization
• Baby & Kids

• View all photos
• Dining Room
• Breakfast Nook
• Family Room
• Bed & Bath
• Powder Room
• Storage & Closet
• Outdoor Kitchen
• Bar & Wine
• Wine Cellar
• Home Office
• Popular Design Ideas
• Kitchen Backsplash
• Deck Railing
• Privacy Fence
• Small Closet
• Stories and Guides
• Popular Stories
• Renovation Cost Guides
• Fence Installation Cost Guide
• Window Installation Cost Guide
• Discussions
• Design Dilemmas
• Before & After
• Houzz Research
• View all pros
• View all services
• View all products
• View all sales
• Living Room Chairs
• Dining Room Furniture
• Coffee Tables
• Home Office Furniture
• Join as a Pro
• Interior Design Software
• Project Management
• Custom Website
• Lead Generation
• Invoicing & Billing
• Landscape Contractor Software
• General Contractor Software
• Remodeler Software
• Builder Software
• Roofer Software
• Architect Software
• Takeoff Software
• Lumber & Framing Takeoffs
• Steel Takeoffs
• Concrete Takeoffs
• Drywall Takeoffs
• Insulation Takeoffs
• Stories & Guides
• LATEST FROM HOUZZ
• HOUZZ DISCUSSIONS
• SHOP KITCHEN & DINING
• Kitchen & Dining Furniture
• Sinks & Faucets
• Kitchen Cabinets & Storage
• Knobs & Pulls
• Kitchen Knives
• KITCHEN PHOTOS
• FIND KITCHEN PROS
• Bath Accessories
• Bath Linens
• BATH PHOTOS
• FIND BATH PROS
• SHOP BEDROOM
• Beds & Headboards
• Bedroom Decor
• Closet Storage
• Bedroom Vanities
• BEDROOM PHOTOS
• Kids' Room
• FIND DESIGN PROS
• SHOP LIVING
• Fireplaces & Accessories
• LIVING PHOTOS
• SHOP OUTDOOR
• Pool & Spa
• Backyard Play
• OUTDOOR PHOTOS
• FIND LANDSCAPING PROS
• SHOP LIGHTING
• Bathroom & Vanity
• Flush Mounts
• Kitchen & Cabinet
• Outdoor Wall Lights
• Outdoor Hanging Lights
• Kids' Lighting
• Decorative Accents
• Artificial Flowers & Plants
• Decorative Objects
• Screens & Room Dividers
• Wall Shelves
• About Houzz
• Houzz Credit Cards
• Privacy & Notice
• Cookie Policy
• Your Privacy Choices
• Mobile Apps
• Copyright & Trademark
• For Professionals
• Houzz vs. Houzz Pro
• Houzz Pro vs. Ivy
• Houzz Pro Advertising Reviews
• Houzz Pro 3D Floor Planner Reviews
• Trade Program
• Buttons & Badges
• Your Orders
• Shipping & Delivery
• Return Policy
• Houzz Canada
• Review Professionals
• Suggested Professionals
• Accessibility
• Houzz Support
• COUNTRY COUNTRY

Deck Builders & Contractors in Elektrostal'

Location (1).

• Use My Current Location

Popular Locations

• Albuquerque
• Cedar Rapids
• Grand Rapids
• Indianapolis
• Jacksonville
• Kansas City
• Little Rock
• Los Angeles
• Minneapolis
• New Orleans
• Oklahoma City
• Orange County
• Philadelphia
• Portland Maine
• Salt Lake City
• San Francisco
• San Luis Obispo
• Santa Barbara
• Washington D.C.
• Elektrostal', Moscow Oblast, Russia

Featured Reviews for Deck Builders & Contractors in Elektrostal'

• Reach out to the pro(s) you want, then share your vision to get the ball rolling.
• Request and compare quotes, then hire the Decks, Patio & Outdoor Enclosures professional that perfectly fits your project and budget limits.
• Deck Building
• Deck Lighting Installation
• Deck Refinishing
• Deck Staining
• Deck Waterproofing
• Gazebo Design & Construction

Some of the best decking materials include:

• Wood: Cedar, redwood, and tropical hardwoods offer a classic look but require regular maintenance.
• Pressure-Treated Lumber: Affordable pine that resists rot and insects but may need staining.
• Composite Decking: Low-maintenance blend of wood fibers and recycled plastic, available in various colors.
• PVC Decking: Synthetic option resistant to stains, scratches, and fading, but can be pricey.
• Aluminum Decking: Lightweight, durable, rust-resistant, suitable for water areas, but more expensive.
• Vinyl Decking: Low-maintenance, moisture, and rot-resistant, but quality varies.

It’s better to build a patio when:

• Privacy is a priority: Patio provides a sense of privacy, especially when enclosed.
• Budget and low maintenance are the priority: Patios are generally more cost-effective to build and require less maintenance.
• The ground is flat: For even ground, constructing a patio is easier and more straightforward.

It’s better to build a deck when:

• Scenic views are desired: Decks offer better views.
• You are fine with obtaining building permits and inspections: Decks typically require permits and inspections due to their structural impact on the home.
• The ground is uneven: If your backyard has slopes or uneven terrain, a deck can provide a stable and level outdoor space.

What services do deck and patio companies in Elektrostal', Moscow Oblast, Russia provide?

Questions to ask a prospective elektrostal', moscow oblast, russia deck installers and patio builder:, business services, connect with us.

Things to Do in Elektrostal, Russia - Elektrostal Attractions

Things to do in elektrostal.

• 5.0 of 5 bubbles
• 4.0 of 5 bubbles & up
• Good for a Rainy Day
• Good for Kids
• Good for Big Groups
• Adventurous
• Budget-friendly
• Hidden Gems
• Good for Couples
• Honeymoon spot
• Good for Adrenaline Seekers
• Things to do ranked using Tripadvisor data including reviews, ratings, photos, and popularity.

1. Electrostal History and Art Museum

2. Statue of Lenin

3. Park of Culture and Leisure

4. museum and exhibition center.

5. Museum of Labor Glory

7. Galereya Kino

8. viki cinema, 9. smokygrove.

10. Gandikap

11. papa lounge bar, 12. karaoke bar.

• Statue of Lenin
• Electrostal History and Art Museum
• Park of Culture and Leisure
• Museum and Exhibition Center
• Museum of Labor Glory

test. The Sunreef 88 DD hasn't forgotten any of the rules of super-yachting. Attention to detail and refinement is everywhere on board, making life enjoyable. The cockpit interior offers a good view forward across the water. From here, you can handle the boat while staying warm during night watches.

At the water, the Portless Catamaran inflates into an impressive 14.8-foot (4.5-m) cat with upper and lower decks designed to accommodate a total of six people. It's meant to go from car trunk to ...

The start of the ambitious Sunreef 88 Double Deck project was officially communicated during Sunreef Yachts' press conference at the Cannes Yachting Festival 2016. After eight months of intensive work, the shipyard proudly announced the launch of this catamaran with a zealous, sporty look. An experienced yachtsman switching from a massive ...

The Sunreef 92 Double Deck features almost 430 square meters of living space, twice as much as the Sunreef 82 Double Deck introduced in 2012. The enlarged deckhouse gives the owners greater comfort and the possibility to invite even more guests on a luxury cruise. The yacht will comfortably accommodate up to 12 guests giving each of them the ...

The double decker is capable of carrying 200 passengers out of the US,and 149 in US waters. The price is the base price without power and can be customized to fit your needs. This boat is fast and economical. Ron Cooper has built over 165 passenger catamarans, from 39' to 107'.

Using integrated stepped hull chins, the Sunreef 92 Double Deck catamaran increases interior space, without compromising performance. Now this yacht can accommodate up to 10 guests, in up to 5 double luxury suites, as well as a crew of four. ... Draft maximum (dagger boat): 1.60 m/5.2 ft

Check out the website for more information on Island Routes' catamaran cruises and other excursions they offer in Jamaica and elsewhere in the Caribbean. They'll help you to book your perfect adventure today! You can also chat online or call. US Toll-Free: 1.877.768.8370. Toll-Free Caribbean: 1.800.744.1150.

The first hull in the Sunreef 88 range of double deck sailing catamarans has been launched in Gdansk for a European owner, the Polish yard has announced. This fully personalised multihull superyacht measures 26.82 metres LOA and was styled inside and out by the in-house team at Sunreef Yachts.

To sum it up, embarking on a double-decker catamaran tour to discover Isla Mujeres is an incredible adventure that combines natural beauty, snorkeling, and island exploration. With the convenience of making a reservation and paying later, along with free cancellation up to 24 hours in advance, this tour offers flexibility for travelers.

32 Double-Decker Catamaran36 ft double deck power catamaran that can accommodate up to 30 guests comfortably. It features a built in bar, 2 loungers on the top deck, a diving board, a waterslide and bathroom. This is a great boat for a private charter.'What is Included' All Your Gear (Fins, Mask, Vest), Beer, ...

Spend the day soaking up the rays on the Caribbean Sea and Isla Mujeres when you book this great-value double-decker catamaran cruise with open bar. Stop to snorkel in the open sea, amid vibrant fish, coral and sculptures. Next, savor a delicious buffet lunch at an island beach club, with free time before you sail back to Cancun amid a spectacular sunset. Upgrade for transfers; all packages ...

Meet the new standard in nearshore and offshore coastal high-performance catamaran deck boats. With it's revolutionary twin tunnel hull design, the Dek Kat 2680 is changing the game for inshore fishing by providing a large, stable fishing platform without sacrificing creature comfort options for the family. Build Your Dek Kat.

Isla Mujeres Catamaran Tour with Snorkel, Open bar and Transportation from hotel. 1,088. Spring Break. from. $75.00. per adult (price varies by group size) Catamaran Tour to Isla Mujeres from Cancún with Bar and Lunch. 10.

Bays of Huatulco and Snorkeling on a Double Decker Catamaran cancellation policy: For a full refund, cancel at least 24 hours in advance of the start date of the experience. ... Surf was rough even for the large boat and 1 person got sea sick. Snorkelling was very good. The crew was great and we had a lot of fun. Read more. Written December 1 ...

Leisure Cat 26 Catamaran Deck Boat with Trailer. Anchor & line, large bimini top, aft swim ladder, full cover, seat cushions, fresh water shower, and full lighted gauges. Power: 1998 225 HP Mercury outboard motor - serviced this year and runs perfectly. 2 new batteries and internal battery charger. 80 gallon fuel tank.

Our Happy Fish II, is a Double Decker 34 feet Motor Catamaran with capacity for 30 guests that will give you a different experience of cruising along the Punta Cana and Cape Engaño crystal clear shallow waters. The Happy Fish II is a very accommodating boat, it has 1 bathroom, a Slide Toboggan, big shade area, upper deck and sound system.

Happy Fish II. Our Happy Fish II, is a Double Decker 34 feet Motor Catamaran with capacity for 30 guests that will give you a different experience of cruising along the Punta Cana and Cape Engaño crystal clear shallow waters. Only offered for Private Tours. The Happy Fish II is a very accommodating boat, it has 1 bathroom, a Slide Toboggan ...

Our Catamaran Party Boat Tour is a MUST when it comes to Punta Cana experiences. This booze cruise takes you along the Coast of Bavaro to the most popular Natural Pool in the Dominican Republic - and that's only the beginning! ... Private, All Inclusive, Double-Decker Catamaran in Punta Cana cancellation policy: For a full refund, cancel at ...

Approximately 2 Hours. Meals Included. Meals not included. Savor Bonaire's breathtaking seascapes from the Sea Breeze double-decker power catamaran. You'll stop at the famous pink salt flats and white mountains of salt. Your guide will explain the salt production process. Offshore from the historical white slave huts, learn some Caribbean facts ...

Search 1,121 Elektrostal' new & custom home builders to find the best custom home builder for your project. See the top reviewed local custom home builders in Elektrostal', Moscow Oblast, Russia on Houzz.

Find deck & patio builders near me on Houzz Before you hire a deck or patio builder in Elektrostal', Moscow Oblast, browse through our network of over 104 local deck & patio builders. Read through customer reviews, check out their past projects and then request a quote from the best deck & patio builders near you.

Strip Club 54 Sunset Boat Party Off Road Fury Barbados Camel Safari Las Vegas Three Tables Dive Site Ice Lagoon Adventure Boat Tours Elephant Jungle Sanctuary Samui Swift Creek Outfitters & Teton Horseback Adventures Odyssey Whale Watching Giorgos Pame Walking Tours

Find company research, competitor information, contact details & financial data for ELGLASS, OOO of Elektrostal, Moscow region. Get the latest business insights from Dun & Bradstreet.

amadeus sailing yacht

New on boatsatsea.

• Mischievous
• The Blue Dream

NEWEST SPECIAL OFFERS

• Adeona ( Lastminute 30% off )
• Royal Flush ( Jun 20% off )
• Aquarella ( 10% off)
• Aquila ( 5% off)
• Ulisse ( 10% off)
• Boom ( 10% off)
• See All Special Offers

TOP CHARTER YACHTS

• Crystal Dreams ( 15% off)
• Bella ( $1,000 off)
• See All Yachts

Most Searched Yacht

Ad astra 5.4.

From $28,500 per week

TOP DESTINATIONS

• Virgin Islands (BVI & USVI)
• Leeward Islands / St. Martin
• Windward Islands / Grenadines

EUROPE / MEDITERRANEAN

• Amalfi Coast & Sicily
• Riviera & Corsica & Sardinia
• Spain / Balearics
• New England
• South America

MY FAVORITE YACHTS

• See Favorite Yachts
• Send & Share Favorite Yachts
• Empty Favorite Yacht List
• Yacht Charter FAQ
• Rates Explanations
• Concierge Service
• Customer Satisfaction
• BoatsAtSea Reviews
• Dedicated Support

Privacy Policy

• Cookie Policy

Amadeus - Crewed Sailing Yacht Charter

Amadeus €35,000.

Amadeus Image 1/22

Layout of Amadeus

Amadeus Image 3/22

Amadeus Image 4/22

SUNBATHING FORWARD

SUNBATHING FORWARD ANOTHER VIEW

• Splash Pool

Splash Pool another view

Amadeus Image 9/22

Amadeus Image 12/22

Amadeus Image 13/22

Amadeus Image 14/22

Amadeus Image 15/22

Amadeus Image 19/22

Amadeus Image 20/22

Anastasia Yurash (Asst. Stewardess)

Stelios Mandos (Engineer)

• From €35,000 / week
• Sailing Monohull + 6 crew
• Summer Port: Cruising Areas Summer: Greece, Turkey Summer Port: Marina Zea, Piraeus, Greece Winter: Greece Winter Port: Marina Zeas, Pireaus, Greece ">Marina Zea, Piraeus, Greece
• Winter Port: Cruising Areas Summer: Greece, Turkey Summer Port: Marina Zea, Piraeus, Greece Winter: Greece Winter Port: Marina Zeas, Pireaus, Greece ">Marina Zeas, Pireaus, Greece
• Length: 110 ft / 33.5 meters 110 feet 33.5 meters
• Guests: 12 in 5 cabins
• Builder: Dynamique Ya
• Built: 1996 / Refit: 2014/2020
• Offers Rendezvous Scuba Diving only

Plus Expenses

• Reviews (1)

Amadeus Description

Built by the famous Dynamique Yachts shipyard, and having undergone a total refit in 2018, S/Y Amadeus was designed to please the most demanding of yachtsmen. Built for smooth sailing, this elegant cutter rigged sloop has a sleek hull design, comfortably reaching top speeds of 12 knots and ensuring excellent sailing performance. S/Y Amadeus has just undergone this past winter (2018) a major refit such as total repaint top to bottom, new rigging (BSI Denmark), Novourania with new Evinrude 75hp outboard, Splash pool, new Bimini/Sprayhood/Awnings, new exterior fabrics and many other enhancements. In 2016 new “North Sails” were placed onboard. The yacht is maintained in excellent condition with a five-star crew year round. Her generous uncluttered teak deck offers plenty of space for sunbathing. The spacious and unique outdoor saloon has two tables seating upto 12 guests and is a perfect setting for outdoor dining and entertainment. Thanks to a special canopy and roll-up windows, the deck saloon has the added attraction that it can be fully enclosed, making it ideal for all weather conditions. Her forward area includes a splash pool and sun bathing area which can also be shaded with a removable awning. From the cockpit, a stairway leads to the light-filled spacious saloon offering ample seating, ideal for relaxing or enjoying a drink from the bar, and offers a formal dining area. This area also includes a LCD TV, entertainment center, ipod dock station, playstation, and is ideal for indoor activities. She can accommodate 10-12 guests in one full width master stateroom, two double bedded cabins each having one extra single bed and two twin bedded cabins which can be easily converted to double beds (upon request), thus, making her the only 5 double bedded sailboat in the Greek market. She also has a nice selection of toys which include water ski (adult and children), tubes, inflatable canoes, wakeboard, fishing rod and snorkeling gear.

Cruising Area of Amadeus

Accommodations, specification, water sports, scuba diving, entertainment, amadeus crew profile, chief stewardess.

CAPTAIN - Harry Fotopoulos Captain Harry is a graduate of the Merchant Marine Academy and holds a Captain Class A’ Diploma. He also holds a Canadian Commercial Pilot license class B, sailing and speedboat license. He has over 15 years of experience onboard many types of Charter Yachts. He holds Certificates in GMDSS, Fire Fighting & First Aid, Personal Safety, Life Saving, and Ship Security. He has a great knowledge of the Greek islands and will navigate guests to remarkable destinations. During his one season on board he showed great leadership skills and received positive feedback from all guests. He is calm yet very outgoing and speaks very good English. DECKHAND - Konstantinos Santas CHIEF STEWARDESS - Mirella Davint Mirella has 8+ years of experience as a stewardess onboard charter and private yachts. She has a very pleasant personality and she aims to accommodate her guests to the fullest. Comments received from previous guests are memorable. This will be Mirella’s eighth season onboard. Mirella speaks English and she is 38 years old. ENGINEER - Stelios Mandos Stelios holds an Engineer Class B’ Diploma from the Greek Merchant Marine Academy as well as a Sailor’s License. He has over 15 years of experience onboard Ocean-Going Vessels and Charter Yachts. His hobbies include spearfishing and sailing. He speaks good English. Stelios is 45 years old, married with two children. CHEF - Thanasis Kiritsis Thanasis is 39 years old and has worked as a chef for more than 20 years in numerous hotels restaurants, yachts and resorts including owning his own pastry shop / bakery for 5 years. Thanasis looks forward to welcoming his guests on board and introducing them to his culinary world. He speaks good English and Greek. He is a young chef full of energy, skills and passion towards his job. We are confident that he will serve his guests unforgettable flavors. ASSISTANT STEWARDESS - Anastasia Yurash Anastasia is 31 years old and has been in the yachting industry since 2021. Her working experience includes 7 years as a housekeeper and assistant stewardess. Anastasia speaks very good English. One of Anastasia’s strongest attributes is her appetite for work. She is also very sociable, welcoming and looks forward to having guests on board S/Y Amadeus. Her hobbies include Latin dancing, snowboard and yoga.

Amadeus Calendar

Amadeus reservations & port locations, amadeus rates / week, low price: €35,000, high price: €42,500, additional rate details, amadeus guest reviews, amadeus / charter july 20-27, 2019.

Sent: Wednesday, July 31, 2019 9:02 PM Hi George, client just informed me, that he and his friends were very happy. Good atmosphere on board, excellent crew, good chef and professional service. Yacht in good condition, nice cabins. The proposed itinerary was good. Clients intend to book AMADEUS next summer again. Please send my big thank you to the Captain. Best regards,

Amadeus Sample Menu

Breakfast selections.

Freshly Squeezed Orange And/Or Grapefruit Juice

Selection Of Other Juices Such As Peach, Pineapple, Tomato.

Fresh Milk Cold And/Or Hot.

Freshly Brewed Coffee And/Or Decaf Coffee, Cappuccino, Espresso (Nespresso)

Hot Or Cold Chocolate, Selection Of Teas Served With Lemon, Honey And/Or Milk.

Breads: Plain Croissant, Chocolate Croissant, Brioche, Muffins, Traditional Greek Bread,

Rolls, Pastries, Toast White/Wheat/Rye.

Selection Of Jams And Marmalades Such As Apricot, Strawberry, Rasberry, Orange And Honey.

Selection Of Cheese Such As Emmental, Edam, Gruyere, Kefalotiri, Graviera,

Cream Cheese, Cottage Cheese, Cheese Spread.

Ham, Bacon, Salami, Smoked Turkey, Prosciutto.

Choice Of: Scrambled Eggs, Boiled Eggs, Fried Eggs, Poached Eggs, Omelets.

Eggs And Omelets Are Prepared To Order And Accompanied According To The Guest’s Requests.

Pancakes, Served With Jam, Honey, Maple Syrup, Fruits And/Or Whipped Cream.

Home-Made Carrot Cake.

Selection Of Cereals Such As Corn Flakes, Bran,Rice Crispies , Muesli.

Greek Plain Yoghurt And Fruit Yoghurt.

Fruit Salad, Half Grapefruit, Mixed Berries, Stewed Prunes, Dried Fruits And Nuts.

LUNCH SELECTIONS

Greek Salad With Marinated Anchovy And Extra Virgin Olive Oil

Fresh Talliatele With Mushrooms And Parmesan Chips

Seawolf Fiilet With Vegetables Briam, Fried Caper And Fresh Thyme Panacotta With Ginger

Salad With Radish, Dill, Parsley, Arabic Pita Bread And Soumak

Egg-Plant Napoleon With Feta Cheese And Tomato Couli

Chicken Roll, Cous-Cous With Raisins, Pine Nut And Orange Sauce Walnut Cake With Vanilla Ice-Cream

Salad With Grilled Peach And Apricot And Watermelon Vinaigrette Sauce

Risotto With Red Mullet, Pine Nuts And Sun Dried Tomato

Pork Loin Filled With Naxos Graviere

Halvas (Semolina) With Korinthous Raisins Kai Cinnamon

Salad With Fennel Root, Olives And Orange

Tarte With Goat Cheese And Green Apple

Gurnet Fillet With Lemon Sauce Baby Potatoes And Parsley

Yogurt Mousse With Fresh Vanilla

Watermelon Salad,Feta Onion And Lemon Sauce, Balsamic Vinegar And Extra Virgin Olive Oil

Stuffed Squid With Chocolate Sauce

Tuna Fillet With Orange Confite And Red Wine Sauce

Peach Cheesecake

Green Salad With Smoked Salmon And Salmon Eggs

Mussels With Fresh White Cheese (Anthotiro) And Peppers

Sole Fillet Saute With Spring Onion And Fava (Yellow Split Peas) Fron Santorini Island

Galaktompoureko (Pastry Fillo Filled With Cream) And Orange Couli

Salad With Rocket, Parmezan Flakes, Sun Dried Tomato And Caramel Balsamic Sauce

Grilled Octapus With Chick Peas And Lemon

Anglerfish Stew With Green Talliatele

Tiramisu With Aigina Pistachios

DINNER SELECTIONS

Salad With Cretan Hard Bread , Tomato And Fresh White Cheese (Anthotiro) Grilled Vegetables Napoleon With Mastello (Chios Cheese) Bream Fillet With Crust From Cuttlefish Ink, Artichoke Mousse And Marinated Fennel Root Chocolate Souffle With Ice-Cream

Green Salad With Cottage Cheese, Walnuts And Extra Virgin Olive Oil With Herbs Cabbage Leafs Filled With Shrimps, Cracked Wheat And Egg-Lemon Sauce And Ginger T-Bone Steak With Mushrooms Sauce,Dofinouaze Potato Trifle With Coffee

Caesars Salad With Poached Egg, Parmesan Tuille And Mustard Crackers Fousili With Pesto Sauce And King Prawns Cod Fish Cooked With Safron, Green Olives And Potato Kantaifi With Pistachio And Ice Cream

Mozzarella Buffal0 With Black Eyed Beans And Fennel Rizotto Venere With Chicken Breast And Crawfish Rib-Eye With Fresh Potato Chips And Vegetable Sauce Almond Pie With Chocolate

Baby Spinach Salad, Pears With Pepper And Walnut Vinegar From Blackberry Beef Carpaccio With Caper, Parmesan And Rocket Gilthead Fillet, Vegetable Chips And Hot Balsamic Sauce Greek Loukoumades, Thyme Honey And Walnuts

Cracked Wheat Salad, Parsley,Cucumber,Tomato And Pomegrenade Sauce Goat And Feta Cheese Croquete, Orange And Cumin Sauce Pork Souvlaki, Greek Pita Bread, Tzatziki Sauce And French Fries Caltsounia (Pastry) With Manouri Cheese, Mint, Honey-Orange Sauce

Grilled Vegetables Salad And Chaloumi (Cyprus Cheese) Eggplant “Papoutsakia”, Mince Meat With Fresh Tomato Sauce Spagetti Flavored With Cutlefish Ink, Shrimps Hazelnut Cream Profiterolle

SIMILAR YACHTS

Check out similar yachts to amadeus.

Estrella De Mar

€23,450 / week

Guests in Cabins: 12 / 5

Length: 111.5 ft (34 m)

Summer Port: Bodrum, Turkey

Prices from: €23,450 / week

€50,000 / week

Guests in Cabins: 9 / 4

Length: 100.6 ft (30.65 m)

Summer Port: Athens, Greece

Winter Port: Athens, Greece

Prices from: €50,000 / week

Wind of Change

€24,000 / week

Guests in Cabins: 6 / 3

Length: 95.1 ft (29 m)

Prices from: €24,000 / week

€29,000 / week

Guests in Cabins: 8 / 4

Length: 99 ft (30.2 m)

Winter: Greece

Prices from: €29,000 / week

€43,500 / week

Length: 108.3 ft (33 m)

Summer Port: Lavrio, Greece

Prices from: €43,500 / week

€21,000 / week

Guests in Cabins: 14 / 7

Length: 115.5 ft (35.20 m)

Summer Port: Gocek, Turkey

Winter Port: Gocek, Turkey

Prices from: €21,000 / week

AMADEUS is a fast cruising sailing yacht built by the famous Dynamique Yachts shipyard and totally refit in 2004, she was designed to please the most demanding of yachtsmen. Built for smooth sailing, this elegant cutter rigged sloop has a sleek hull design that enables her to comfortably reach top speeds of 12 knots and ensures excellent sailing performance.

This sailing yacht's generous uncluttered teak deck with a foredeck pool, offers plenty of space for sunbathing. The spacious and unique outdoor saloon has two tables, a bar and barbeque, a perfect setting for outdoor dining and entertainment. Thanks to a special canopy and roll-up windows, the deck saloon has the added attraction that it can be fully enclosed, making it ideal for all weather conditions. From the cockpit, a stairway leads to the light-filled spacious saloon offering ample seating, ideal for relaxing or enjoying a drink from the bar, and a formal dining area with seating for up to 12 guests.

Accomodation is offered for up to 12 guests in 5 spacious cabins: the bow master cabin on AMADEUS features a double bed, vanity unit and generous storage facilities, as well as audio/visual entertainment. The en-suite bath includes a shower and separate large bath. Two double cabins with additional single bunks situated forward. Two twin cabins situated aft. All cabins with en suite facilities and audio/visual entertainment. Crew of 5 in separate quarters.

Special Features :

- Fast cruising sailing yacht - Spacious teck deck, sunbathing areas - Outdoor saloon with a bar and barbecue

Tender: Novourania tender 4.20m with YAMAHA X 70hp plus MERCURY x 10hp

Activities : Wakeboard , Kayak , Snorkeling equipment , Waterskis , Fishing equipment , Monoski , Tender , Tubes .

Summer : East Mediterranean Greece - The Cyclades Islands | Turkey | Greece – The Ionian Islands

Winter : East Mediterranean Greece - The Cyclades Islands | Turkey | Greece – The Ionian Islands

News & publications

SHINE: New yacht for sale!

A simply stunning Swan 58 as only Swan can. The big sister to the 48 she sails phenomenally well and was designed to allow for fast, safe and comfortable Bluewater passage making. This original owner has used her to cruise the Baltic and she has certainly proven herself. She is ready...

JACK: New Central Agency Yacht

Built in 2023, JACK is a sophisticated and comfortable catamaran that embodies a blend of lightweight construction, eco-friendliness, and remarkable performance. Indeed, she is able to achieve remarkable speeds of up to 21 knots in just 20 knots of wind. Her exterior includes a sprawling...

ONYX 2: New sailing yacht for sale!

ONYX 2 offers amazing space and comfort for those onboard to cruise anywhere in the world. She is seaworthy, solidly-built and well-equipped. She accommodates up to 12 guests in 6 cabins and 7 crew in 3 cabins. There is also a fantastic deck house which offers an incomparable interior...

Similar boats for charter

Length : 31.95 m / Passengers : 6

Special features : - Elegant and sophisticated, with classy mahogany interiors- Wide beam and high volume with a vast centre cockpit, large deckhouse and voluminous main...

Length : 30.3 m / Passengers : 8

Special features : - Deck plan designed for easy sailing and comfort both for crew and guests- Maximum flexibility for shading the guest cockpit and the sunbathing area,...

Length : 34.8 m / Passengers : 8

Special features : Tenders:- "Lina": 7.10 m Scanner with 300 HP inboard engine, specially equipped wih bimini and sprayhood, new in 2018- "Mieke": 4.70 m ZAR with 100 HP...

Length : 37 m / Passengers : 8

Length : 35.2 m / Passengers : 6

Special features : - High tech performance sailing yacht- Plumb bow and wide stern for improved performance and stability- Twin rudders for increased responsiveness- Aerodynamic...

Length : 33.7 m / Passengers : 8

Special features : - Five Stars Crew with an outstanding Chef led by Captain Eddy- Best combination of Elegance and High Performance Sailing yacht- New sails ( DFI aramide...

Length : 30.48 m / Passengers : 12

Special features : - Gold medal winner for the RORC Transatlantic 2015, setting a new record. This performance yacht with the sensation of speed and power is equipped with...

Length : 35.36 m / Passengers : 6

Special features : Tender: 115 Hp Yamaha on 15' Rendova

Length : 31.78 m / Passengers : 8

Special features :  KEY FEATURES- Awarded the prestigious Quality and Value award at the 2015 World Superyacht Awards- Offers high performance sailing with first class...

Length : 30.2 m / Passengers : 8

Special features : - One of the most elegant SW100- Excellent and experienced crew- Very elegant interiors- Available in West and East Med- Large outdoor spaceTender: 4.30...

• Receive the brochure of this yacht
• FR +33 AC +247 AD +376 AE +971 AF +93 AG +1 AI +1 AL +355 AM +374 AO +244 AR +54 AS +1 AT +43 AU +61 AW +297 AX +358 AZ +994 BA +387 BB +1 BD +880 BE +32 BF +226 BG +359 BH +973 BI +257 BJ +229 BL +590 BM +1 BN +673 BO +591 BQ +599 BR +55 BS +1 BT +975 BW +267 BY +375 BZ +501 CA +1 CC +61 CD +243 CF +236 CG +242 CH +41 CI +225 CK +682 CL +56 CM +237 CN +86 CO +57 CR +506 CU +53 CV +238 CW +599 CX +61 CY +357 CZ +420 DE +49 DJ +253 DK +45 DM +1 DO +1 DZ +213 EC +593 EE +372 EG +20 EH +212 ER +291 ES +34 ET +251 FI +358 FJ +679 FK +500 FM +691 FO +298 FR +33 GA +241 GB +44 GD +1 GE +995 GF +594 GG +44 GH +233 GI +350 GL +299 GM +220 GN +224 GP +590 GR +30 GT +502 GU +1 GW +245 GY +592 HK +852 HN +504 HR +385 HT +509 HU +36 ID +62 IE +353 IL +972 IM +44 IN +91 IQ +964 IR +98 IS +354 IT +39 JE +44 JM +1 JO +962 JP +81 KE +254 KG +996 KH +855 KI +686 KM +269 KN +1 KP +850 KR +82 KW +965 KY +1 KZ +7 LA +856 LB +961 LC +1 LI +423 LK +94 LR +231 LS +266 LT +370 LU +352 LV +371 LY +218 MA +212 MC +377 MD +373 ME +382 MF +590 MG +261 MH +692 MK +389 ML +223 MM +95 MN +976 MO +853 MP +1 MQ +596 MR +222 MS +1 MT +356 MU +230 MV +960 MW +265 MX +52 MY +60 MZ +258 NA +264 NC +687 NE +227 NF +672 NG +234 NI +505 NL +31 NO +47 NP +977 NR +674 NU +683 NZ +64 OM +968 PA +507 PE +51 PF +689 PG +675 PH +63 PK +92 PL +48 PM +508 PR +1 PS +970 PT +351 PW +680 PY +595 QA +974 RE +262 RO +40 RS +381 RU +7 RW +250 SA +966 SB +677 SC +248 SD +249 SE +46 SG +65 SH +290 SI +386 SJ +47 SK +421 SL +232 SM +378 SN +221 SO +252 SR +597 SS +211 ST +239 SV +503 SX +1 SY +963 SZ +268 TC +1 TD +235 TG +228 TH +66 TJ +992 TL +670 TM +993 TN +216 TO +676 TR +90 TT +1 TV +688 TW +886 TZ +255 UA +380 UG +256 US +1 UY +598 UZ +998 VA +39 VC +1 VE +58 VG +1 VI +1 VN +84 VU +678 WF +681 WS +685 XK +383 YE +967 YT +262 ZA +27 ZM +260 ZW +263

Thanks for contacting us. We will get back to you shortly.

Une erreur s'est produite. Merci de rééssayer.

Contact  us

Send message

About Amadeus

Charter rates.

specifications

• Length 33.52M (110′)
• Beam 7.53M (25′-4″)

Builder Dynamique Yachts

• Year of build 1996

Tenders & Toys

• Fishing equipment
• inflatable canoes
• On deck pool
• Snorkeling gear

Talk to our experts

Looking for a yacht charter? We’re happy to help! Please call the number below, send an email or contact us via WhatsApp.

Maxim Beckers

Carl-Antoine Saverys

Share this yacht, related yachts for charter.

© EXMAR YACHTING   |  All rights reserved

Subscribe to receive the latest news

Contact our team.

Sales Department

Crewed Department

Bareboat Department

• Sailing Yachts
• Motor Sailers
• Motor Yachts
• Our bareboat bases in Greece
• Yacht Management
• Technical Support / After-sales services
• Concierge services

Vernicos Yachts

Get in Touch

Sales Department: [email protected]

Crewed Department: [email protected]

Bareboat Department: [email protected]

Other: [email protected]

T : +30 210 9896 000

Ideas for you

BALI Catsmart

BAVARIA Cruiser 51

Private: FERRETTI 760

Lagoon 450F “ZACAPA”

LAGOON 42 “ALEXANDROS”

LAGOON 50 “VICTORIA”

BARACUDA VALLETTA

Bareboat yacht charter in Greece

Best beaches for Mykonos boat trips

Boats for sale in Greece

Bareboat Yachts

Bareboat Bases

or chat with an expert

Contact our charter team

Crewed Team

Send me a message

Built by the famous Dynamique Yachts shipyard, and having undergone a total refit in 2014, S/Y Amadeus was designed to please the most demanding of yachtsmen.

Built for smooth sailing, this elegant cutter rigged sloop has a sleek hull design, comfortably reaching top speeds of 12 knots and ensuring excellent sailing performance. Accommodation is offered for up to 12 guests in 5 spacious cabins (one master cabin, two identical double cabins with additional single bunks, two identical twin cabins) all with en suite facilities and audio/visual entertainment.

General Description

Carian Coast, Ionian Islands

Dynamique Yachts

1996 / 2018

Rates (MYBA Terms: + ALL)

45,500 € per week

35,000 € per week

2018 Nuvorania tender 4.60m Outboard EVINRUDE 75hp Splash pool Water Skis (adult and kids) Mono Ski Wakeboard

2 Tubes Inflatable Kayak Fishing Gear Snorkeling Equipment 4 Yoga mats

Destinations

Carian Coast

Superb historical sites set in magnificent scenery

Ionian Islands

Unforgettable Sailing Holidays

Request Availability

Get in touch for the yacht: AMADEUS

Download Brochure

Download brochure for the yacht

Add to Favourites

Keep track of your preferred yachts and access them quickly whenever you revisit our website.

AMADEUS Dynamique Yachts SA

• Inspiration

AMADEUS has 2 Photos

Amadeus News

Reduced charter rate offered by 44m ...

Similar yachts.

SHAMOUN | From US$ 65,100/wk

• Yachts >
• All Yachts >
• All Sail Boats Over 100ft/30m >

If you have any questions about the AMADEUS information page below please contact us .

A General Description of Sailing Yacht AMADEUS

AMADEUS was previously registered as project/yacht name Amadeus 1er. This 33 metre (109 ft) luxury yacht was built by Dynamique Yachts in 1991. Sailing Yacht AMADEUS is a well proportioned superyacht. The yacht is a modern sloop with a cutter rig. The naval architecture office whom authored the design work on this ship was Philippe Briand. Luxury yacht AMADEUS is a quality yacht that is able to accommodate as many as 12 guests on board and has a total of 5 crew members.

Sailing yacht AMADEUS was built by the famous Dynamique Yachts shipyard .The yacht features superb sailing characteristics which are complimented by her spacious interior and abundant deck space. Sailing sloop AMADEUS can accommodate 10 passengers in five cabins. With one large master stateroom and four additional cabins which are all air conditioned and have en suite bathrooms. She also has two separate salons and a full dining room. The aft deck is fully covered with seating. The fore deck has an unique pool on deck and swimming in the sea is made accessible by a large swim aft platform.

The Construction & Naval Architecture relating to Luxury Yacht AMADEUS

Philippe Briand was the naval architect firm involved in the formal nautical design work for AMADEUS. Also the company Philippe Briand skillfully collaborated on this undertaking. In 1991 she was actually launched to triumph in Marans and following sea trials and final completion was afterwards passed on to the yacht owner. Dynamique Yachts completed their new build sailing yacht in France. A reasonable proportion is brought about with a maximum beam (width) of 7.5 metres / 24.6 feet. With a 3.6m (11.8ft) draught (maximum depth) she is reasonably deep. The material composite was used in the building of the hull of the sailing yacht. Her superstructure above deck is built with the use of composite. Over the deck of AMADEUS she is 32.7 (107.3 ft) in length. In 2004 extra refitting and modernisation was also finished.

Engines & Speed For S/Y AMADEUS:

She is driven by twin screw propellers. The main engine of the ship gives 375 horse power (or 276 kilowatts). She is equiped with 2 engines. The combined thrust for the boat is therefore 750 HP / 552 KW.

On board Superyacht AMADEUS She has The Following Guest Accommodation Format:

Bestowing bedding for a maximum of 12 yacht guests sleeping aboard, the AMADEUS accommodates them in style. Normally the vessel requires approximately 5 professional crewmembers to run.

A List of the Specifications of the AMADEUS:

Further information on the yacht.

Condaria is the company that installed the A/C on the yacht. AMADEUS features a teak deck.

AMADEUS Disclaimer:

The luxury yacht AMADEUS displayed on this page is merely informational and she is not necessarily available for yacht charter or for sale, nor is she represented or marketed in anyway by CharterWorld. This web page and the superyacht information contained herein is not contractual. All yacht specifications and informations are displayed in good faith but CharterWorld does not warrant or assume any legal liability or responsibility for the current accuracy, completeness, validity, or usefulness of any superyacht information and/or images displayed. All boat information is subject to change without prior notice and may not be current.

Quick Enquiry

"Indeed we believe that the first function of a sailing yacht is the aesthetics and we spent a lot of time in refining the lines during the project." - "I understood very young that to win a race you have to have the best boat, and so I started to be interested about the technology and the design of the boat." - Philippe Briand

Yan Yelken | From EUR€ 28,980/wk

Seaquell | From US$ 40,000/wk

Shanti | From EUR€ 28,000/wk

• Yachts for sale
• Yachts for charter
• Brokerage News

• Yacht Harbour
• Yacht Amadeus

Contact agent, specifications, similar yachts.

New listings

• USA:-1.866.492.4768
• UK:-0800.011.2492
• How We Help Clients
• How to book a charter?
• Why Use Our Company
• Where our Charters Go
• Why Charter a Yacht
• Decades of Experience
• Meet our staff
• Contact us now
• Search charter yachts online
• What type of yacht should I charter?
• About Luxury Yacht Charter
• Charter a Mega Yacht
• Charter a Motor Yacht
• Charter a Crewed Catamaran
• Charter a Sailboat
• Yacht charter Blog
• About Caribbean Yacht Charters
• Virgin Islands
• Leeward Islands
• Windward Islands
• Yachts in the Caribbean
• About Bahamas Yacht Charters
• Bahamas weather
• Yachts in the Bahamas
• Western Mediterranean Yacht Charters
• Eastern Mediterranean Charters
• Browse Yachts in the Mediterranean
• South of France
• Spain, Mallorca, Ibiza
• Italy, Sicily, Naples & Amalfi
• Corsica and Sardinia
• Pacific Islands
• Sample Charter Itineraries
• Destinations Blog
• How to choose a yacht charter broker?
• How to book a yacht charter?
• What is special about yacht charter?
• What yacht charter costs are there ?
• Are there all inclusive charters?
• Why charter a yacht?
• What kinds of yacht can I charter?
• Where do yacht charters go?
• What defines luxury yacht charter?
• How to rent a yacht?
• How We Help
• 5 Common Yacht Charter Questions
• How to choose the right yacht?
• When is the best time to charter?
• All Yacht Charter Destinations
• What can you do on a yachting vacation?
• What to expect on a luxury charter?
• What contracts are used to book?
• Even more questions about chartering a yacht
• Crewed charter reviews
• Caribbean Reviews
• BVI Reviews
• Bahamas Reviews
• Mediterranean Reviews
• Email or Call Us

AMADEUS 110' Fully Crewed Sailing Yacht

• Summer Locations: Greece , Turkey Winter Locations: Greece
• Max Guests : 12    Cabins : 5    Crew : 6
• Starting at : EUR €39,500 (approx. $45,820 USD )

Charter rates do not include expenses or taxes

Her master cabin features a walk around king bed, desk/vanity, and en-suite bathroom. Additionally, there are two guest cabins each with a queen bed convertible to two twins, and two guest cabins each with a queen bed and twin bed. Each guest cabin has an en-suite.

Her main salon has a spacious, contoured conversational area, along with a large, flatscreen T.V. The aft deck features al fresco dining with Bimini top. Up on deck there are sun pads and a splash pool for you and your guests to enjoy.

Watersports offered include a 15 foot tender with 75hp engine, water skis for adults and children, tube, wakeboard, kayak, fishing gear, snorkeling gear, and rendezvous diving.

Additional Images

Does this yacht interest you?

Let us know a few details below, we'll check availability and answer all your questions:.

Even faster answer? Call Toll Free from USA/Canada: 1 866.492.4768 , Direct 1.954.448.5053

Send Message

Additional Sailing Yachts with 5 cabins:

LONG ISLAND 127' sailing yacht

Can sleep up to 10 guests in 5 staterooms Weekly rate starts at: EUR €45,500 (approx. $52,780 USD)

Summer Locations: Turkey

See additional pictures and info about LONG ISLAND »    Contact us about LONG ISLAND »

TIGRA 124' sailing yacht

Can sleep up to 10 guests in 5 staterooms Weekly rate starts at: EUR €32,000 (approx. $37,120 USD)

Winter Locations: Greece , Turkey

Summer Locations: Greece , Turkey

See additional pictures and info about TIGRA »    Contact us about TIGRA »

ALTHEA 122' sailing yacht

Can sleep up to 10 guests in 5 staterooms Weekly rate starts at: EUR €39,500 (approx. $45,820 USD)

Winter Locations: Greece

Summer Locations: Greece

See additional pictures and info about ALTHEA »    Contact us about ALTHEA »

AMADEUS 110' sailing yacht

Can sleep up to 12 guests in 5 staterooms Weekly rate starts at: EUR €39,500 (approx. $45,820 USD)

See additional pictures and info about AMADEUS »    Contact us about AMADEUS »

Yacht Name Search

Do you have a particular yacht in mind? We likely have it online and if not, email or call us for details. Search for it online by name here:

See Charter Yachts by region:

• Yachts in the Mediterranean
• Why you should choose us

Read more about charter yacht types:

• Mega Yachts
• Sailing yachts

International Yacht Charter Group Inc. does not guarantee the accuracy of any information or images displayed. Both are subject to change and may not be current. All information contained herein is not contractual. Continue reading for more details: 2003 - 2023 © All Rights Reserved. Privacy Policy Site map

Sailing Yacht | Amadeus

Fuel Capacity

Water capacity, sailing yacht amadeus | luxury crewed monohull.

Sailing yacht AMADEUS is a stunning 110 ft yacht available for charter in Greece. With a clean, spacious teak deck and a unique outdoor saloon that can seat up to 12 guests across two tables, it’s the perfect place for outdoor dining and entertainment. The deck saloon can also be enclosed with a special canopy and roll-up windows, making it suitable for use in all weather conditions. At the front of the boat, there’s a splash pool and sunbathing area with a removable awning for shade.

Inside the boat, a staircase from the cockpit leads to a well-lit and roomy saloon area with plenty of seating, including a formal dining area, bar, LCD TV, entertainment center, iPod dock station, and Playstation. Sailing Yacht AMADEUS can accommodate 10-12 guests in five large cabins, including a full-width master stateroom and two double cabins, each with an extra single bed. The two twin cabins can also be converted to doubles upon request, making her the only sailboat on the Greek market with five double beds.

To add to the fun, sailing yacht AMADEUS also comes with a range of water toys, including adult and children’s water skis, tubes, inflatable canoes, wakeboard, fishing rod, and snorkeling gear. She was built by Dynamique Yachts in 1996 and underwent a refit in 2014/2018.

ACCOMMODATION

• 1 Master cabin
• 2 VIP cabins
• 2 Twin cabins

Accomodation is offered for 10 -12 guests in 5 spacious cabins: Master cabin forward features a double bed, vanity unit and generous storage facilities, as well as audio/visual entertainment. The en-suite includess a large bath tub, shower and separate WC. Two identical double cabins with additional single bunks situated forward. Two identical double cabins situated aft which can be convertible to twins. (Total 5 double beds) All cabins with en suite facilities and audio/visual entertainment.

A professional crew of 5-6 members are accommodated in separate quarters.

Note that these specifications may vary slightly depending on the specific yacht’s configuration and modifications made by the owner.

New rigging BSI Denmark (2018) New North Sails (2016) Nuvorania tender 4.60m with a New Outboard EVINRUDE E tec 75hp Engines: 2 x 320HP Perkins Rolls Royce Generators: 1 Northern Lights x 25KW, 1 ONAN x 60KW Cruising speed: 10 Fuel consumption: 120 Litres/Hr Generators: 250 Liters/Day

Navigation and safety

• Outside GPS plotter
• Bow thruster
• Electric winches
• Classic mainsail

Saloon and cabins

• Air conditioning
• Coffee machine
• Kitchen utensils
• Pillows and blankets

Entertainment

• LCD 27″ TV, VCR, & CD entertainment systems in Saloon
• X-Box ONE X & Playstation 3 in Saloon
• Master cabin: TV, CD, & DVD entertainment systems
• Double cabins: TV, CD, & DVD entertainment systems
• Twin cabins (convertible to Doubles):TV, CD, & DVD entertainment systems

Water Sports

• Tender & Toys:
• 2018 Nuvorania tender 4.60m with a New Outboard EVINRUDE E tec75hp
• Water Skis (adult and kids)
• Inflatable Kayak
• Fishing Gear
• Snorkelling Equipment
• 4 Yoga mats
• Bathing platform
• Stand Up Paddle

Weekly price: €35,000 – €42,500

Low Season | High Season

Charter Type: Crewed

Berths: 10-12 guests, sailing area: argo-saronic, departure ports: alimos, athens, send us your request, personal information, booking information.

Odyssey Sailing is registered and bonded with the Greek National Tourist Organisation (GNTO – EOT) and is a member of the Hellenic Yacht Brokers Association (HYBA).

SOCIAL MEDIA

Useful links.

Antonopoulou 158D Volos, 38221, Greece

JOIN OUR NEWSLETTER

By subscribing to the Odyssey Sailing newsletter you agree to allow us collecting information about your open and click rates in order for us to develop further newsletter campaigns for our subscribers.

Length 33,5m / 109′ ft.

Built/Last Refit 2009/2021

Weekly rate Low € 35.000

Weekly rate High € 45.500

Accommodation

Luxury yacht AMADEUS can accommodate up to 12 guests in 5 cabins. One Master cabin with small desk and en suite facilities (wc separate from bath and shower). Two double cabins with additional single bed and two twin cabins. All cabins with en suite facilities.

Charter Amenities and Extras

S/Y AMADEUS has the following extras onboard: Tenders & Toys include Novourania tender 4.20m with YAMAHA X 70hp plus, MERCURY x 10hp, Water Skis, Mono Ski, Wakeboard, 2 Tubes, Fishing Gear, Snorkelling Equipment, Communications include VHF-GMDSS, Cellular phone, Radar, E-Mail/internet access, Audio Visual Equipment and Deck Facilities include Master cabin: TV, CD, & DVD entertainment system, Double cabins: TV, CD, & DVD entertainment system, Twin cabins: TV, CD, & DVD entertainment system, Saloon: LCD 27’ TV, VCR, & CD entertainment system.

Leave a comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

By using this form you agree with the storage and handling of your data by this website. *

This site uses functional cookies and external scripts to improve your experience.

Privacy settings

Privacy Settings

This site uses functional cookies and external scripts to improve your experience. Which cookies and scripts are used and how they impact your visit is specified on the left. You may change your settings at any time. Your choices will not impact your visit.

NOTE: These settings will only apply to the browser and device you are currently using.

Cookie Consent

This site uses cookies to offer you a better browsing experience. By using Hellas Yachting, you agree to our Privacy Policy, including cookie policy.

Discover more!

Sign up to receive inspiration on Yachting, the Mediterranean Lifestyle & Special Offers, the Valef way

*By completing this form you are signing up to receive our emails and can unsubscribe at any time

Charter the AMADEUS

AMADEUS is a 110-foot sailing yacht that can accommodate ten to twelve passengers in five staterooms as follows: a spacious Owner’s stateroom with a double bed, a vanity and an entertainment unit including TV, DVD and music system; two cabins with a double bed and an additional single bed; two cabins with two twin beds each. All staterooms have en suite bathrooms, a TV, DVD and CD player. There are two separate salons onboard as well as a full dining room. The aft deck is fully covered and has seating for all guests to dine in the open air. Forward of the cockpit is a lovely cushioned area for sunning and an unusual pool is found in the fore of the yacht. Swimming in the sea is made accessible by the large swim aft platform.

Image Gallery

Yacht Specifications:

Length: (33.26m/109.11ft), yacht type: sailing yachts, beam: 24.7 ft, built: 1996 | 2018, draft: 12.10 ft, builder: dynamic, guests: 10-12, engines: 2 x 320hp perkins rolls royce, generators: 1 northern lights x 25kw, 1 onan x 60kw, fuel: 120 ltrs/hr, configuration: 1 master cabin, 2 doubles cabins with a single bed each, 2 twin cabins, cruising speed: 10 knots/hr.

(*All specifications are given in good faith and offered for informational purposes only. Yacht inventory, specifications and charter rates are subject to change without prior notice.*)

Recreational Equipment

• NEW Novorania tender 4.60m with NEW EVINRUDE 75hp plus MERCURY x 10hp • Wakeboard • Water Skis (adult and kids), Mono Ski • 2 Tubes • Kayak • 4 Yoga mats • Fishing Gear Snorkelling Equipment

Weekly Rates

High season: €42,500/week, med season: €37,500/week, low season: €35,000/week.

(*Rates are given based on a week charter / Rates are subject to change without notice*)

Customer Reviews

I could no joke die tomorrow and be a happy man. ~ Matthew F.

Although we have traveled just about all over the world, this was probably our best vacation ever. We will be back! ~ Louise Z.

Our trip was FABULOUS! More than exceeded expectations. ~ Anne G.

We have just completed a vacation that I have thought about for a lot of years. Thank you all for making a dream come true!!!! ~ Mae & Bill M.

Everyone is still talking about the trip and I cannot imagine it going any better. ~ Jack D.

Interested in this yacht?

Let us create a custom tailored experience for you..

Country you Live In United States Canada Mexico United Kingdom Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antigua and Barbuda Argentina Armenia Armenia Aruba Australia Austria Azerbaijan Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bonaire Bosnia and Herzegovina Botswana Bouvet Island (Bouvetoya) Brazil British Indian Ocean Territory (Chagos Archipelago) British Virgin Islands Brunei Darussalam Bulgaria Burkina Faso Burundi Cambodia Cameroon Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocos (Keeling) Islands Colombia Comoros Congo Congo Cook Islands Costa Rica Cote d'Ivoire Croatia Cuba Curaçao Cyprus Cyprus Czech Republic Denmark Djibouti Dominica Dominican Republic Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Falkland Islands (Malvinas) Faroe Islands Fiji Finland France French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guam Guatemala Guernsey Guinea Guinea-Bissau Guyana Haiti Heard Island and McDonald Islands Holy See (Vatican City State) Honduras Hong Kong Hungary Iceland India Indonesia Iran Iraq Ireland Isle of Man Israel Italy Jamaica Japan Jersey Jordan Kazakhstan Kazakhstan Kenya Kiribati Korea Korea Kuwait Kyrgyz Republic Lao People's Democratic Republic Latvia Lebanon Lesotho Liberia Libyan Arab Jamahiriya Liechtenstein Lithuania Luxembourg Macao Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Micronesia Moldova Monaco Mongolia Montenegro Montserrat Morocco Mozambique Myanmar Namibia Nauru Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island Northern Mariana Islands Norway Oman Pakistan Palau Palestinian Territory Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Islands Poland Portugal Puerto Rico Qatar Reunion Romania Russian Federation Rwanda Saint Barthelemy Saint Helena Saint Kitts and Nevis Saint Lucia Saint Martin Saint Pierre and Miquelon Saint Vincent and the Grenadines Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Serbia Seychelles Sierra Leone Singapore Sint Maarten (Netherlands) Slovakia (Slovak Republic) Slovenia Solomon Islands Somalia South Africa South Georgia and the South Sandwich Islands Spain Sri Lanka Sudan Suriname Svalbard & Jan Mayen Islands Swaziland Sweden Switzerland Syrian Arab Republic Taiwan Tajikistan Tanzania Thailand Timor-Leste Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkey Turkmenistan Turks and Caicos Islands Tuvalu U.S. Virgin Islands U.S. Minor Outlying Islands Uganda Ukraine United Arab Emirates Uruguay Uzbekistan Vanuatu Venezuela Vietnam Wallis and Futuna Western Sahara Yemen Zambia Zimbabwe

Destination Greece Turkey Montenegro and Croatia West Mediterranean

Number of Guests 1 2 - 4 4 - 6 6 - 8 8 - 10 10 - 12 12+

Number of Cabins 3 Cabin 4 Cabins 5 Cabins 6 Cabins 7 Cabins 8+ Cabins

Yacht Length 45ft - 70ft 70ft - 110ft 110ft - 130ft 130ft - 160ft 160ft +

Weekly Rate < €14,000 €14,000 - 35,000€ 35,000€ - 49,000€ 49,000€ - 70,000€ 70,000€ - 105,000€ 105,000€ - 175,000€ 175,000€ +

Write your Message

I want to receive news about Valef Yachts, yachts & charters and Mediterranean travel inspiration

Rent the Yacht, Own the feeling.

Call Us or fill the form

+90 216 900 28 62.

Don't hesitate to contact us!

Working time

Mon - Fri: 9:00 - 18:00 / Closed on Weekends

Company Headquarters

DEGIRMENDERE MAH. SANAYI CAD. 8 SK.7

KUSADASI 09400 AYDIN TURKIYE

Only for Carriers in the US , For loads, Please enter the required information.

Our offices.

Değirmendere Mah. Sanayi Cad.8

Sk. No:7 Kuşadası 09400 Aydın

+ (90) 256 340 03 40

[email protected]

Mon - Fri: 9:00 - 18:00 Closed on Weekends

Drive to us Now

Küçükbakkalköy Mah. Fevzipaşa Cad.

Bozkır Sok. No:1 ,K:3 D:15 Ataşehir 34750 Istanbul

+ (90) 216 900 28 62

+(90) 216 576 47 90

2, Stroitelny Lane, Elektrostal , Moscow

+7 (499) 390 35 04

Drive to our office 

128 City Road , London EC1V 2NX

+44 20 4577 1271

Mon - Fri: 9:30 - 17:00 Closed on Weekends

26 Seaman Ave Hempstead 11550 New York

+1 646 980 28 04

Humberto 1 985,Piso 2,Ofic 222

Constitucion Capital Federal CP 1103

Buenos Aires

+54 11 52 371 371

Mon - Fri: 9:00 - 17:30 Closed on Weekends

Please use a modern browser to view this website. Some elements might not work as expected when using Internet Explorer.

• Landing Page
• Luxury Yacht Vacation Types
• Corporate Yacht Charter
• Tailor Made Vacations
• Luxury Exploration Vacations
• View All 3565
• Classic Yachts
• Catamaran Yachts
• Filter By Destination
• More Filters
• Latest Reviews
• Charter Special Offers
• Destination Guides
• Inspiration & Features
• Mediterranean Charter Yachts
• France Charter Yachts
• Italy Charter Yachts
• Croatia Charter Yachts
• Greece Charter Yachts
• Turkey Charter Yachts
• Bahamas Charter Yachts
• Caribbean Charter Yachts
• Australia Charter Yachts
• Thailand Charter Yachts
• Dubai Charter Yachts
• Destination News
• New To Fleet
• Charter Fleet Updates
• Special Offers
• Industry News
• Yacht Shows
• Corporate Charter
• Finding a Yacht Broker
• Charter Preferences
• Questions & Answers
• Add my yacht

View More Photos

• Luxury Charter Yachts
• Motor Yachts for Charter
• Amenities & Toys
• Rates & Regions
• + Shortlist

AMADEUS YACHT CHARTER

21.95m  /  72'   sunseeker   2008.

• Previous Yacht

Cabin Configuration

Special Features:

• Cruising speed of 22 knots
• Sleeps 6 guests
• Williams Jet RIB

Luxury yacht Amadeus is the perfect charter platform for yachting vacations spent entertaining in style

The 21.95m/72' motor yacht 'Amadeus' by the British shipyard Sunseeker offers flexible accommodation for up to 6 guests in 3 cabins.

If you're looking for a family-friendly yacht with plenty of onboard amenities, Amadeus is the perfect choice, promising superb charter vacations whatever the destination.

Guest Accommodation

Built in 2008, Amadeus offers guest accommodation for up to 6 guests in 3 suites comprising a master suite, one VIP cabin and one twin cabin. There are 4 beds in total, including 1 queen, 1 double and 2 singles. She is also capable of carrying up to 2 crew onboard to ensure a relaxed luxury yacht charter experience.

Onboard Comfort & Entertainment

Whatever your activities on your charter, you'll find some impressive features are seamlessly integrated to help you, notably Wi-Fi connectivity, allowing you to stay connected at all times, should you wish. Guests will experience complete comfort while chartering thanks to air conditioning.

Performance & Range

Powered by twin MAN engines, she comfortably cruises at 22 knots, reaches a maximum speed of 35 knots with a range of up to 250 nautical miles.

Onboard Amadeus has a range of toys and accessories to keep you and your guests entertained on the water throughout your stay. Principle among these are Super wid waterskis that are hugely entertaining whether you are a beginner or a seasoned pro. Another excellent feature are O' Brien Ace wakeboards so guests can show off at speed. When it's time to travel from land to see, it couldn't be easier with a Williams Jet RIB.

Motor yacht Amadeus boasts an impressive array of outstanding amenities for truly out-of-this-world charter vacations that you’ll never forget.

TESTIMONIALS

There are currently no testimonials for Amadeus, please provide .

Amadeus Photos

Amenities & Entertainment

For your relaxation and entertainment Amadeus has the following facilities, for more details please speak to your yacht charter broker.

Amadeus is reported to be available to Charter with the following recreation facilities:

• 1 x Williams 325 Jet RIB 100 HP engine

For a full list of all available amenities & entertainment facilities, or price to hire additional equipment please contact your broker.

• + shortlist

For a full list of all available amenities & entertainment facilities, or price to hire additional equipment please contact your broker.

'Amadeus' Charter Rates & Destinations

Please contact your charter broker for a quote or check availability .

Charter Amadeus

To charter this luxury yacht contact your charter broker , or we can help you.

To charter this luxury yacht contact your charter broker or

Update your yacht

Yacht Owner, Captain or Central Agents - Send us latest Photos, Charter Rates or Corrections Contact Us

SIMILAR YACHTS FOR CHARTER

d'Artagnan

20m | Ferretti Yachts

from $25,000 p/week ♦︎

21m | Azimut

from $27,000 p/week

21m | Ferretti Yachts

from $23,000 p/week ♦︎

21m | Aicon

from $17,000 p/week ♦︎

22m | Sunseeker

from $28,000 p/week ♦︎

20m | Galeon

from $13,000 p/week ♦︎

22m | Baia Yachts

from $29,000 p/week ♦︎

P'tite Bouille

21m | Princess

from $32,000 p/week ♦︎

Saint George

20m | Sunseeker

POA ♦︎

21m | President

from $24,000 p/week ♦︎

NOTE to U.S. Customs & Border Protection

Specification

• Share on Facebook
• Share Yacht

SIMILAR LUXURY CHARTER YACHTS

Here are a selection of yachts which are similar to the current charter yacht. To view all similar luxury charter yachts click on the button below.

As Featured In

The YachtCharterFleet Difference

YachtCharterFleet makes it easy to find the yacht charter vacation that is right for you. We combine thousands of yacht listings with local destination information, sample itineraries and experiences to deliver the world's most comprehensive yacht charter website.

San Francisco

• Like us on Facebook
• Follow us on Twitter
• Follow us on Instagram
• Find us on LinkedIn
• Add My Yacht
• Affiliates & Partners

Popular Destinations & Events

• St Tropez Yacht Charter
• Monaco Yacht Charter
• St Barts Yacht Charter
• Greece Yacht Charter
• Mykonos Yacht Charter
• Caribbean Yacht Charter

Featured Charter Yachts

• Maltese Falcon Yacht Charter
• Wheels Yacht Charter
• Victorious Yacht Charter
• Andrea Yacht Charter
• Titania Yacht Charter
• Ahpo Yacht Charter

Receive our latest offers, trends and stories direct to your inbox.

Please enter a valid e-mail.

Thanks for subscribing.

Search for Yachts, Destinations, Events, News... everything related to Luxury Yachts for Charter.

Yachts in your shortlist

Turn Your Curiosity Into Discovery

Latest facts.

3 TopRated Sites To Boost Your TikTok and Instagram Following

5 Detailed Facts About Medical Cannabis

40 facts about elektrostal.

Written by Lanette Mayes

Modified & Updated: 02 Mar 2024

Reviewed by Jessica Corbett

Elektrostal is a vibrant city located in the Moscow Oblast region of Russia. With a rich history, stunning architecture, and a thriving community, Elektrostal is a city that has much to offer. Whether you are a history buff, nature enthusiast, or simply curious about different cultures, Elektrostal is sure to captivate you.

This article will provide you with 40 fascinating facts about Elektrostal, giving you a better understanding of why this city is worth exploring. From its origins as an industrial hub to its modern-day charm, we will delve into the various aspects that make Elektrostal a unique and must-visit destination.

So, join us as we uncover the hidden treasures of Elektrostal and discover what makes this city a true gem in the heart of Russia.

Key Takeaways:

• Elektrostal, known as the “Motor City of Russia,” is a vibrant and growing city with a rich industrial history, offering diverse cultural experiences and a strong commitment to environmental sustainability.
• With its convenient location near Moscow, Elektrostal provides a picturesque landscape, vibrant nightlife, and a range of recreational activities, making it an ideal destination for residents and visitors alike.

Known as the “Motor City of Russia.”

Elektrostal, a city located in the Moscow Oblast region of Russia, earned the nickname “Motor City” due to its significant involvement in the automotive industry.

Home to the Elektrostal Metallurgical Plant.

Elektrostal is renowned for its metallurgical plant, which has been producing high-quality steel and alloys since its establishment in 1916.

Boasts a rich industrial heritage.

Elektrostal has a long history of industrial development, contributing to the growth and progress of the region.

Founded in 1916.

The city of Elektrostal was founded in 1916 as a result of the construction of the Elektrostal Metallurgical Plant.

Located approximately 50 kilometers east of Moscow.

Elektrostal is situated in close proximity to the Russian capital, making it easily accessible for both residents and visitors.

Known for its vibrant cultural scene.

Elektrostal is home to several cultural institutions, including museums, theaters, and art galleries that showcase the city’s rich artistic heritage.

A popular destination for nature lovers.

Surrounded by picturesque landscapes and forests, Elektrostal offers ample opportunities for outdoor activities such as hiking, camping, and birdwatching.

Hosts the annual Elektrostal City Day celebrations.

Every year, Elektrostal organizes festive events and activities to celebrate its founding, bringing together residents and visitors in a spirit of unity and joy.

Has a population of approximately 160,000 people.

Elektrostal is home to a diverse and vibrant community of around 160,000 residents, contributing to its dynamic atmosphere.

Boasts excellent education facilities.

The city is known for its well-established educational institutions, providing quality education to students of all ages.

A center for scientific research and innovation.

Elektrostal serves as an important hub for scientific research, particularly in the fields of metallurgy, materials science, and engineering.

Surrounded by picturesque lakes.

The city is blessed with numerous beautiful lakes, offering scenic views and recreational opportunities for locals and visitors alike.

Well-connected transportation system.

Elektrostal benefits from an efficient transportation network, including highways, railways, and public transportation options, ensuring convenient travel within and beyond the city.

Famous for its traditional Russian cuisine.

Food enthusiasts can indulge in authentic Russian dishes at numerous restaurants and cafes scattered throughout Elektrostal.

Home to notable architectural landmarks.

Elektrostal boasts impressive architecture, including the Church of the Transfiguration of the Lord and the Elektrostal Palace of Culture.

Offers a wide range of recreational facilities.

Residents and visitors can enjoy various recreational activities, such as sports complexes, swimming pools, and fitness centers, enhancing the overall quality of life.

Provides a high standard of healthcare.

Elektrostal is equipped with modern medical facilities, ensuring residents have access to quality healthcare services.

Home to the Elektrostal History Museum.

The Elektrostal History Museum showcases the city’s fascinating past through exhibitions and displays.

A hub for sports enthusiasts.

Elektrostal is passionate about sports, with numerous stadiums, arenas, and sports clubs offering opportunities for athletes and spectators.

Celebrates diverse cultural festivals.

Throughout the year, Elektrostal hosts a variety of cultural festivals, celebrating different ethnicities, traditions, and art forms.

Electric power played a significant role in its early development.

Elektrostal owes its name and initial growth to the establishment of electric power stations and the utilization of electricity in the industrial sector.

Boasts a thriving economy.

The city’s strong industrial base, coupled with its strategic location near Moscow, has contributed to Elektrostal’s prosperous economic status.

Houses the Elektrostal Drama Theater.

The Elektrostal Drama Theater is a cultural centerpiece, attracting theater enthusiasts from far and wide.

Popular destination for winter sports.

Elektrostal’s proximity to ski resorts and winter sport facilities makes it a favorite destination for skiing, snowboarding, and other winter activities.

Promotes environmental sustainability.

Elektrostal prioritizes environmental protection and sustainability, implementing initiatives to reduce pollution and preserve natural resources.

Home to renowned educational institutions.

Elektrostal is known for its prestigious schools and universities, offering a wide range of academic programs to students.

Committed to cultural preservation.

The city values its cultural heritage and takes active steps to preserve and promote traditional customs, crafts, and arts.

Hosts an annual International Film Festival.

The Elektrostal International Film Festival attracts filmmakers and cinema enthusiasts from around the world, showcasing a diverse range of films.

Encourages entrepreneurship and innovation.

Elektrostal supports aspiring entrepreneurs and fosters a culture of innovation, providing opportunities for startups and business development.

Offers a range of housing options.

Elektrostal provides diverse housing options, including apartments, houses, and residential complexes, catering to different lifestyles and budgets.

Home to notable sports teams.

Elektrostal is proud of its sports legacy, with several successful sports teams competing at regional and national levels.

Boasts a vibrant nightlife scene.

Residents and visitors can enjoy a lively nightlife in Elektrostal, with numerous bars, clubs, and entertainment venues.

Promotes cultural exchange and international relations.

Elektrostal actively engages in international partnerships, cultural exchanges, and diplomatic collaborations to foster global connections.

Surrounded by beautiful nature reserves.

Nearby nature reserves, such as the Barybino Forest and Luchinskoye Lake, offer opportunities for nature enthusiasts to explore and appreciate the region’s biodiversity.

Commemorates historical events.

The city pays tribute to significant historical events through memorials, monuments, and exhibitions, ensuring the preservation of collective memory.

Promotes sports and youth development.

Elektrostal invests in sports infrastructure and programs to encourage youth participation, health, and physical fitness.

Hosts annual cultural and artistic festivals.

Throughout the year, Elektrostal celebrates its cultural diversity through festivals dedicated to music, dance, art, and theater.

Provides a picturesque landscape for photography enthusiasts.

The city’s scenic beauty, architectural landmarks, and natural surroundings make it a paradise for photographers.

Connects to Moscow via a direct train line.

The convenient train connection between Elektrostal and Moscow makes commuting between the two cities effortless.

A city with a bright future.

Elektrostal continues to grow and develop, aiming to become a model city in terms of infrastructure, sustainability, and quality of life for its residents.

In conclusion, Elektrostal is a fascinating city with a rich history and a vibrant present. From its origins as a center of steel production to its modern-day status as a hub for education and industry, Elektrostal has plenty to offer both residents and visitors. With its beautiful parks, cultural attractions, and proximity to Moscow, there is no shortage of things to see and do in this dynamic city. Whether you’re interested in exploring its historical landmarks, enjoying outdoor activities, or immersing yourself in the local culture, Elektrostal has something for everyone. So, next time you find yourself in the Moscow region, don’t miss the opportunity to discover the hidden gems of Elektrostal.

Q: What is the population of Elektrostal?

A: As of the latest data, the population of Elektrostal is approximately XXXX.

Q: How far is Elektrostal from Moscow?

A: Elektrostal is located approximately XX kilometers away from Moscow.

Q: Are there any famous landmarks in Elektrostal?

A: Yes, Elektrostal is home to several notable landmarks, including XXXX and XXXX.

Q: What industries are prominent in Elektrostal?

A: Elektrostal is known for its steel production industry and is also a center for engineering and manufacturing.

Q: Are there any universities or educational institutions in Elektrostal?

A: Yes, Elektrostal is home to XXXX University and several other educational institutions.

Q: What are some popular outdoor activities in Elektrostal?

A: Elektrostal offers several outdoor activities, such as hiking, cycling, and picnicking in its beautiful parks.

Q: Is Elektrostal well-connected in terms of transportation?

A: Yes, Elektrostal has good transportation links, including trains and buses, making it easily accessible from nearby cities.

Q: Are there any annual events or festivals in Elektrostal?

A: Yes, Elektrostal hosts various events and festivals throughout the year, including XXXX and XXXX.

Was this page helpful?

Our commitment to delivering trustworthy and engaging content is at the heart of what we do. Each fact on our site is contributed by real users like you, bringing a wealth of diverse insights and information. To ensure the highest standards of accuracy and reliability, our dedicated editors meticulously review each submission. This process guarantees that the facts we share are not only fascinating but also credible. Trust in our commitment to quality and authenticity as you explore and learn with us.

Share this Fact:

Built by the famous Dynamique Yachts shipyard and having undergone a refit in 2018, sailing Yacht Amadeus was designed to please the most demanding of yachtsmen. Built for smooth sailing, this elegant cutter rigged sloop has a sleek hull design, comfortably reaching top speeds of 12 knots and ensuring excellent sailing performance. ...

The 33.5m/109'11" 'Amadeus' sail yacht built by the French shipyard Dynamiq is available for charter for up to 10 guests in 5 cabins. This yacht features interior styling by French designer Philippe Briand. Whether you are after the thrill of sailing or prefer to kick back, Amadeus is custom-built for adventure, offering a ring-side seat at the heart of the action once her sails have unfurled ...

Sailing yacht AMADEUS is a luxury vessel that measures 33.5m (109.9ft) in length. She was built by the famous Dynamique Yachts shipyard in 1995 and received a total refit in 2004 and smaller refits in 2012/14 and 2018 plus new interior fabrics in 2022. AMADEUS is an elegant cutter rigged sloop with a sleek hull design painted in an eye-catching ...

Amadeus Description. Built by the famous Dynamique Yachts shipyard, and having undergone a total refit in 2018, S/Y Amadeus was designed to please the most demanding of yachtsmen. Built for smooth sailing, this elegant cutter rigged sloop has a sleek hull design, comfortably reaching top speeds of 12 knots and ensuring excellent sailing ...

Length : 30.2 m / Passengers : 8. Special features : - One of the most elegant SW100- Excellent and experienced crew- Very elegant interiors- Available in West and East Med- Large outdoor spaceTender: 4.30... Price Per week from : 46 000€. View this yacht. AMADEUS is a fast cruising sailing yacht built by Dynamique Yachts and totally refit in ...

The 23.85m/78'3" sail yacht 'Amadeus' was built by Custom. Her interior is styled by design house Jean Marc Piaton and she was completed in 2018. Guest Accommodation. Amadeus has been designed to comfortably accommodate up to 8 guests in 4 suites. She is also capable of carrying up to 2 crew onboard to ensure a relaxed luxury yacht experience.

Built by the famous Dynamique Yachts shipyard, and having undergone a total refit in 2018. S/Y Amadeus was designed to please the most demanding of yachtsmen. Built for smooth sailing, this elegant cutter rigged sloop has a sleek hull design. Comfortably reaching top speeds of 12 knots and ensuring excellent sailing performance.

The yacht is maintained in excellent condition with a five-star crew year round. Sailing Yacht Amadeus was designed to please the most demanding of yachtsmen. Built for smooth sailing, this elegant cutter rigged sloop has a sleek hull design, comfortably reaching top speeds of 12 knots and ensuring excellent sailing performance.

AMADEUS I is a 44m/144' motor yacht for charter delivered by the Timmerman shipyard in 2014. Considered as a great luxury charter yacht for friends and family, AMADEUS I was fully upgraded in 2019. Her key features include a huge sundeck with a jacuzzi pool plus a brand-new beach club with a gym and sauna at sea level.

Built by the famous Dynamique Yachts shipyard, and having undergone a total refit in 2014, S/Y Amadeus was designed to please the most demanding of yachtsmen. Built for smooth sailing, this elegant cutter rigged sloop has a sleek hull design, comfortably reaching top speeds of 12 knots and ensuring excellent sailing performance.

AMADEUS was previously registered as project/yacht name Amadeus 1er. This 33 metre (109 ft) luxury yacht was built by Dynamique Yachts in 1991. Sailing Yacht AMADEUS is a well proportioned superyacht. The yacht is a modern sloop with a cutter rig. The naval architecture office whom authored the design work on this ship was Philippe Briand.

Amadeus is a 33.5 m sailing yacht. She was built by Dynamique Yachts in 1991. With a beam of 7.5 m and a draft of 3.9 m. The sailing yacht can accommodate 12 guests in 5 cabins. The yacht was designed by Philippe Briand.

Launched in 1996 by Dynamique Yachts, Amadeus is a 110 foot sailing sloop. To keep her up to date and comfortable for her guests, she has received refits in 2014 and 2018. She has been fitted with twin 320hp Perkins Rolls Royce engines for power, along with her sails.

33.5m / 109'11 Dragos Yachts 1996 / 2007. The 34.75m/114' 'Amadeus' motor yacht built by shipyard Dragos Yachts is available for charter for up to 12 guests in 5 cabins. This yacht features interior styling by Ugar Kose. Built in 1996, Amadeus's bespoke fittings and design ensure guests can explore the ocean's wonders in style and comfort.

Sailing Yacht AMADEUS can accommodate 10-12 guests in five large cabins, including a full-width master stateroom and two double cabins, each with an extra single bed. The two twin cabins can also be converted to doubles upon request, making her the only sailboat on the Greek market with five double beds.

Fully crewed Sailing Yacht AMADEUS available for private yacht charter in Greece, the best sailing holidays & vacation in the Greek Islands. +30 6948 295 207. [email protected] . Aten, Solonos 22-24, Agii Anargiri 135 61, Greece ... Sailing Yachts; Motor Sailer; Yacht Charter Terms; V.I.P. Services; Destinations; About us;

Charter theAMADEUS. AMADEUS is a 110-foot sailing yacht that can accommodate ten to twelve passengers in five staterooms as follows: a spacious Owner's stateroom with a double bed, a vanity and an entertainment unit including TV, DVD and music system; two cabins with a double bed and an additional single bed; two cabins with two twin beds each.

AMADEUS I is a 44m luxury motor super yacht available for charter built in 2014, refitted in 2019. Charter up to 10 guests in 5 cabins (1 Master, 2 VIP, 3 Double & 2 Twin) with a crew of 9. She is also available for events and corporate charter.

No:7 Kuşadası 09400 Aydın. + (90) 256 340 03 40. [email protected] . Mon - Fri: 9:00 - 18:00. Closed on Weekends. Istanbul Branch - Türkiye. Moscow - Russia. London - United Kingdom. New York - United States of America.

Küçükbakkalköy Mah. Fevzipaşa Cad. Bozkır Sok. No:1 ,K:3 D:15 Ataşehir 34750 Istanbul + (90) 216 900 28 62 +(90) 216 576 47 90. [email protected]

Get directions to Yuzhny prospekt, 6к1 and view details like the building's postal code, description, photos, and reviews on each business in the building

The 21.95m/72' 'Amadeus' motor yacht built by the British shipyard Sunseeker is available for charter for up to 6 guests in 3 cabins.. Primed for exploring secluded beaches and tucked-away lagoons or simply relaxing and soaking up the rays onboard, motor yacht Amadeus is tailor-made for family fun.

Known as the "Motor City of Russia." Elektrostal, a city located in the Moscow Oblast region of Russia, earned the nickname "Motor City" due to its significant involvement in the automotive industry.. Home to the Elektrostal Metallurgical Plant. Elektrostal is renowned for its metallurgical plant, which has been producing high-quality steel and alloys since its establishment in 1916.